The Manfrotto 322RC2 Ball Head Kit with Quick Release Platefrom Manfrotto 322RC2 Ball Head Kit with Quick Release Platecan be attached to tripods or other support systems that feature a 3/8"-16 mount. By squeezing the control handle's integrated trigger, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. A thumbwheel set within the control handle can be rotated to apply tension control to the ball-and-socket joint's movements. Once the squeeze trigger is released, any adjustments to the position of the ball-and-socket joint are locked into place.

The control handle is initially oriented to provide a horizontal grip for the right hand. However, the included 322RA Quick Release Adapter with 200PL-14 Quick Release Plate are detachable and can be repositioned to enable left-handed use with a horizontal grip. Alternatively, the 322RC2 can be transformed into a joystick-grip ball head suitable for right or left-handed use with the control handle oriented vertically and the quick release adapter attached to the top of the configuration. The 322RC2 has a load capacity of 17.6 lb.

Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the quick release plate, which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface.

Ball Head with Control Handle    Horizontal and Joystick Grip Positions    Horizontal Load Capacity: 11.0 lb    Joystick Load Capacity: 7.0 lb    Integrated Handle Squeeze Trigger    Two 322RA Quick Release Adapters    Quick Release Adapter Bubble Levels    RC2 Quick Release Cam Locks    200PL-14 Quick Release Plate    1/4"-20 Mount, Non-Slip Surface

• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Uses ball-and-socket joint with easy-to-grip control handle to help maximize pan-and-tilt flexibility
• By squeezing the control handle's integrated trigger, the ball-and-socket joint can be quickly swiveled 360°, fully tilted down to a 90° angle, or returned to its upright position
• When the control handle's squeeze trigger is released, any adjustments to the position of the ball-and-socket joint are locked into place
• A thumbwheel set within the control handle can be rotated to apply tension control to the ball-and-socket joint's movements
• Built-in tension-control indicator within the control handle
• Can provide a horizontal grip for either right or left-handed use
• Available joystick-grip ball head configuration for right or left-handed use
• Has a load capacity of 17.6 lb
• 322RA Quick Release Adapter with RC2 quick release cam lock and built-in bubble level
• Hex key to adjust position of 322RA Quick Release Adapter and tension on ball-and-socket joint

• Compatible with Manfrotto RC2 quick release cam lock
• Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface
• 1/4"-20 mount
• Durable, aluminum alloy construction

Related Questions and Answers

Q: 1. I screwed the head on my tripod..how do I prevent it from unscrewing or swiveling at the base and becoming unscrewed over use?

A: There has been nothing implemented to prevent the following head from un screwing off the center column but applying enough tension when mounting the system.

Q: 2. Does the quick release shown in the picture come with the actual head or is that sold separately?

A: The mount and baseplate are included. Is also reversible for left hand operation.

Q: 3. I can't seem to get this head to look straight up. I do a lot of birding and need to point the camera up vertically to get a shot. Is there a way to do this?

A: This head can only be set vertically or horizontally.

Q: 4. How do I set this head so my camera lens will point upward toward the sky?

A: If you want to point your camera directly skywards, you may have to rotate your camera's placement on the quick release plate by 90°.

Q: 5. Can this action grip be used on a monopod as well?

A: Yes it can, as long as your monopod has a 3/8 male threaded attachment point on top.

Q: 6. Will this fit on the manfrotto 290 extra tripod?

A: Yes, the threaded fitting on top is the correct size

Q: 7. Can support Peak Design Arca-Style plate?

A: No it will not. You would need the Peak Design PROplate.

Q: 8. I have a Vanguard Auctus Plus 283CT tripod, will the Pistol grip work?

A: Yes, the Manfrotto 322RC2 Ball Head with 200PL-14 Quick Release Plate and 322RA Quick Release Adapter (B&H# MA322RC2) will attach to the Vanguard Auctus Plus 283CT Carbon Fiber Tripod (B&H# VAAP283CT).

Q: 9. is this ball head compatible with A2190T Benro Tripod?

A: Yes it will

Q: 10. What is the main difference between this and the Manfrotto 327RC2 Ball Head? https://www.bhphotovideo.com/c/product/680140-REG/Manfrotto_327RC2_327RC2_Joystick_Head.html/qa

A: The 322RC2 is an older model with friction control for the ball sphere. The 327RC2 is newer and lacks the friction control.