This single channel tactical cable is designed for Military Tactical deployment applications and meets all outdoor tactical needs for broadcast applications requiring an outdoor rated crush and impact resistant design. The tough Polyurethane Core-Locked design is perfect for any situation where ordinary PVC jacket cables do not provide adequate protection in the field. Featuring Senko premium fiber connectors. All assemblies are machine polished and interferometer tested to industry standards.

• Broadcast deployable
• Indoor/outdoor rated jacket
• Typical RL <-55dB and IL<0.25dB
• Wide temperature range (typically -55°C to 85°C)
• 500µm primary acrylate buffer with 900µm secondary hard elastomeric buffer (Ultra-Fox Plus)
• Excellent crush and impact resistance due to their polyurethane Core-Locked outer jacket
• Designed to withstand crush and impact after deployment
• Strong, lightweight and extremely durable cable

Related Questions and Answers

Q: 1. Would these feet work on any tripod with a 3/8” socket?

A: While they were designed with specific tripods in mind, they should work in most tripods with a 3/8 16th thread in the leg.

Q: 2. I have a set of Sigma Art lenses (24mm f1.4, 35mm f1.4, 50mm f1.4) that I use on my A7Sii. I heard there might be an issue with balancing those heavier lenses on the Ronin SC?

A: At this time only the Sigma 35mm Art lens is listed on DJI's compatible chart for the Ronin-SC and they comment that it will require the use of the camera riser and a counter weight.

Q: 3. does this cut 8 ply mats and foam core?

A: Logan Graphics 750-1 Simplex Elite Mat Cutter (40" Cut Length) BH #LO7501 comes with the 701-1 Straight Cutter that cuts up to 3/8" foam board and the #5000 8 Ply Bevel Cutter that cuts 8 ply mat board.

Q: 4. Is the Ronin-SC compatible with a Sony A7 iv? The DJI website says it is compatible with the A7R4, but does not mention the regular A7 iv.

A: The DJI Ronin-SC Gimbal Stabilizer has a maximum payload capacity of 4.85 pounds, so it can balance a Sony a7 IV with a light lens. However, the gimbal's camera controls are not compatible with this camera.

Q: 5. Do you need to use this cutter on a table top, or can you mount it on plywood for a wall mount?

A: This Logan 750-1 Simplex Elite Mat Cutter works best on a table top.

Q: 6. I have a 70D canon with an 18 -135mm lens that weighs 1.05 kg in total. Will it support this weight?

A: The DJI Ronin-SC Gimbal Stabilizer can effectively balance up to 4.4 pounds so it will work with the 70D and 18-135mm lens, but keep in mind that any change in the focal point will require re-balancing.

Q: 7. Will this lens activate the Sony A7 III manual focusing aid?

A: There is no electronic contact with this lens. So only in camera contrast focus aids will work.

Q: 8. Can I adapt this lens to EF Mount to use with Ursa Mini Pro?

A: Not sure sorry

Q: 9. How much space is needed to set up and use the cutter? TIA

A: The working space would need to be larger than the length of the trimmer which is 46".

Q: 10. can I set it up for 120 volts ?

A: No it would not. But I have attached the same model that would.