This 12 channel tactical fiber cable is designed for Broadcast & Pro-AV deployment applications and meets all outdoor tactical needs for applications requiring an outdoor rated crush and impact resistant design. The tough Thermoplastic Polyurethane Core-Locked design is perfect for any situation where ordinary PVC jacket cables do not provide adequate protection in the field. All assemblies are machine polished and interferometer tested to industry standards. All products are 100% tested and a complete set of test documentation of your cable is available upon request.
Ruggedized multi-channel fiber optic cables designed for multiple deployments for field production in outside broadcast, rental houses and more. Highly flexible tight-buffered tactical cables with internal aramid strength members for crush resistance in high traffic areas if handled properly and a polyurethane outer sheath designed to withstand crushing by both military tanks and Outside Broadcast vehicles. All assemblies multi-stage machine polished and tested for <.55db RL with test results for each channel supplied with each cable.

• Broadcast deployable
• Indoor/Outdoor rated jacket
• Typical RL <-55dB and IL<0.25dB
• Wide temperature range (typically -55°C to 85°C)
• 500um primary acrylate buffer with 900um secondary hard buffer
• Excellent crush and impact resistance due to their polyurethane Core-Locked outer jacket
• Designed to withstand crush and impact after deployment
• Strong, lightweight and extremely durable cable

Related Questions and Answers

Q: 1. Can you pad the master output signal down to mic level?

A: Yes, you can pad the master output signal from the Zoom LiveTrak L-12 Digital Mixer & Multitrack Recorder by using an attenuator like the Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel (B&H # HOATT448) and setting the attenuation level for -30 or -40 dB to reduce the line level signal to mic level. The ATT-448 can be used on each of the XLR outputs with XLR cables.

Q: 2. If I am using this as a multitrack audio interface on a computer, can I also record to an SD card?

A: When set to Audio Interface Mode, the L12 will send multitrack audio to a computer while recording to an SD card.

Q: 3. Can the XLR Master Out, the 1/4" Master Out, and headphone outs send a mono signal?

A: Yes, as long as you are using mono signals, you can have dual mono output for the left and right master outputs, and for the headphone output on the Zoom LiveTrak L-12 Digital Mixer and Multitrack Recorder.

Q: 4. Will this power PA speakers for event use?

A: This is a mixer/recorder its not a amplifier so it will not be able to provide power to PA speakers. All it can do is send the signal from the board to the speakers to play, however the speakers need their own power or a additional amplifier.

Q: 5. Why won't my Canon LP-E6NH batteries charge in this unit? The red light flashes and the batteries do not charge. These are genuine Canon batteries purchased from BHPhoto, and these batteries do charge in my cheap-o single charger.

A: The IDX System Technology LC-2A Two-Channel Charger will only support the Canon batteries listed. It does not support the Canon LPE6NH. Canon BP-955, BP-975, LP-E6

Q: 6. inputs 9 and 10, are used to feed stereo audio from a laptop using 3.5mm to rca cables?

A: Yes, input channels 9 and 10 on the Zoom LiveTrak L-12 - 12-Channel Digital Mixer & Multitrack Recorder can be used to connect a line-level signal from a stereo source using either the RCA or 1/4" connectors, so you can use a 3.5mm TRS to dual RCA cable to connect the 3.5mm output from a laptop computer to the L12.

Q: 7. Can it work with 220 voltage?

A: The Zoom LiveTrak L-12 - 12-Channel Digital Mixer & Multitrack Recorder is 110V only.

Q: 8. What is in the box? What batteries does it charge for Panasonic?r

A: Included in the box are five types of battery plates, two each, for a total of ten. It has two types of Panasonic plates. The Panasonic batteries it can charge are secured: VW-VBG6, VW, VBG260, unsecured: VW-VBD55, VW-VBD58

Q: 9. Are you able to use the Master outputs XLR and the 2 monitor outputs 1/4 jacks at the same time?

A: Yes, you can use both outputs at the same time.

Q: 10. Will the headphone jack monitor out accepts speakers instead of Headphones? Do i also use a power speaker or an amp may be?

A: Yes... can be used with powered or unpowered speakers.