The Altman Pegasus 6 2700K LED Fresnel Black Enclosureis a 2700K, white-output LED Fresnel with a 6" lens housed in a black enclosure, capable of operation in both mains dimmable and DMX systems. The fixture uses a 120W lamp and casts soft light similar to that produced by theatrical and studio Fresnels, achieving an output equivalent to that of a 500W incandescent fixture.

The Pegasus 6 is designed to seamlessly integrate into preexisting dimmer systems. When the unit is set to Mains Dim Control, it can plug directly into theatrical phase-cut dimmers and functions in both forward- and reverse-phase implementations, replicating the smooth dimming curves of similar incandescent fixtures. The fixture is designed to operate on both 120V and 230V dimming systems, with a voltage selector switch on the rear of the unit. This switch just applies to the operating voltage of the dimming system. The fixture itself has a universal, auto-sensing power supply capable of functioning between 120 and 240 VAC.

The fixture is also fully RDM (Remote Device Management) and DMX compliant. This allows for its use in a lighting system that uses both constant power (for phase-cut dimming) and DMX data control. Simply flip the DMX/Mains Dim switch on the rear of the Pegasus 6 to convert it into a DMX/RDM controllable unit.

It can be used with standard theatrical gels as well as with gels formulated for LEDs. The fixture is constructed entirely from metal and is made in the USA. It ships with a C-clamp, a color frame, a safety cable, and a powerCON power cable.

Lamp Wattage of 130W    Mains Dimmable or DMX Controlled    RDM Compliant    PowerCON and DMX In/Thru Connections    Variable Beam Angle: 15 to 85 Degrees    Beam Adjustment Knob    High-Resolution Digital Dimming    Fully Homogenized Beam    Life Expectancy of 50,000 Hours    Made in the USA

Easily integrates into preexisting dimming systems (both forward and reverse-phase)

Functions in constant power, DMX, and combination constant power/DMX systems

RDM compliant

DMX and powerCON daisy chaining

Variable beam angle: 15 to 85 degrees

50,000 hour life expectancy

High-resolution digital dimming

Fully homogenized beam

Works with standard theatrical gels and gels formulated for LEDs

High CRI (greater than 90)

Ships with a C-clamp, color frame, safety cable, and powerCON power cable

Made in the USA

Related Questions and Answers

Q: 1. Is this bowens mount or only for nanlight? Would it fit the godox mount on 60bi lights?

A: The Nanlite CN-18X Fresnel Lens for P-100 LED Light BH #NACN18X is specifically for the P-100 LED.

Q: 2. Why are these 5000K? For true daylight these should be in the 5500/5600 kelvin range. Am I missing something?

A: These are geared for the Cinema industry and 5000K is the preferred color temperature

Q: 3. How rugged is the ReLamp? What do I need to do when I travel?

A: We find this lamp to be quite rugged. You can leave it installed in your fixture as long as you have a suitable travel case for the fixture.

Q: 4. Is there a softbox that fits on this fresnel?

A: Also, I just use some clamps and shoot it through a chimera meant for strobes. Gorgeous light...

Q: 5. Does this come with a yoke or some form of mounting hardware?

A: The Altman EC-1-CE Econo Cyc 230V One Section Econo Cyc has a rugged slide bracket which allows multiple units to be safely locked together, but does not come with a yoke. However, the yoke may be purchased separately, such as the Altman Yoke - Single Cell, with Iron Pipe Clamp for Altman Focusing Cyc, B&H # ALY1FC1, the Altman Yoke - 2 Cell, with Iron Pipe Clamp for Altman Focusing Cyc, B&H # ALY2FC1, the Altman Yoke - 3 Cell, with Heavy Duty Iron Pipe Clamp for Altman Focusing Cyc, B&H # ALY3FC1, or the Altman Yoke - 2 Over 2, with Heavy Duty Iron Pipe Clamp for Altman Focusing Cyc, B&H # ALY22FC1.

Q: 6. How many of these would I need to evenly light a 9' wide by 8' tall green screen?

A: It will depend on the positioning of the light and the power of the lamp used, but one light should be enough.

Q: 7. Is this compatible with Arri ArriLite 750 Plus?

A: Unfortunately, this lamp is not compatible with the Arrilite 750 +.

Q: 8. Will this work with the COLBOR 220W Bi-Color COB?

A: Yes, the GVM F40 Fresnel Attachment for LED Light Spotlight will mount and work with the COLBOR CL220R 220W RGB COB LED Video Light. Both of these products utilize the Bowens S mount.

Q: 9. Is this compatible with the capture 600d?

A: No, the SmallRig RA-F150 Focusing Fresnel Lens for LED Monolights can physically mount to the Aputure LS 600d but the 600d requires a stronger fan.

Q: 10. Could I make this fit in an arri 150?

A: No, the following Relamp will accommodate the following fixtures. ARRI 300 Plus ARRI ARRILITE 575 Plus/Fresnel Mini Kit ARRI Compact Fresnel Three-Light Kit ARRI Four-Light Fresnel Mini Kit ARRI Fresnel 5-Light Kit ARRI Fresnel Combo 4-Light Kit ARRI H-4 Plus Hybrid AC Light Kit ARRI Softbank D1 Three-Light Kit ARRI Softbank D2 Three-Light Kit ARRI Softbank D4 Four-Light Kit ARRI Softbank I Tungsten 4-Light Kit ARRI Softbank IV Plus 5 Light Kit