Quick Mount Receiver 3/8" Gag Solutions

Product Code: eq179382
Availability: In Stock

$53.97 $75.56

Qty

10 reviews Write a review

Description
Reviews (10)

The Quick Mount Receiver 3/8" Gag Solutionsfrom Quick Mount Receiver 3/8" Gag Solutionsallows you to attach Quick Mount accessories to any 3/8" diameter rod for creative rigging possibilities. It features a thumbscrew for secure clamping and a side opening design that lets you attach it anywhere along a rod without having to slide it on from the end.

Accepts Quick Mount Accessories Mounts to 3/8" Diameter Rod Side Opening for Quick Attachment

Parameters
Rod Compatibility	3/8" (10 mm)
Weight	1.4 oz (39 g)
Packaging Info
Package Weight	0.1 lb
Box Dimensions (LxWxH)	3.6 x 3.4 x 0.6"

Related Questions and Answers

Q: 1. Can i clean films with this?

A: Yes, you can clean film and photographic emulsions using PEC-PAD photo wipes. We recommend using them in conjunction with the appropriate cleaning solution.

Q: 2. Help me understand why one would choose Aeroclipse or Eclipse?

A: The Photographic Solutions Aeroclipse Digital Sensor Cleaning Fluid is TSA approved and Non-flammable.

Q: 3. What is the height of the head when it is positioned for horizontal shooting?

A: The Arca-Swiss Monoball P1+ with ClicPan and Classic Receiver weights 1.3 lb / 585 g on horrizontal, or vertical position.

Q: 4. Does this come with the plugs?

A: In the Box of this Bolt Film Solutions Half Milk Crate Divider, would be the following. Bolt Film Solutions Half Milk Crate Divider 2 x Divider Plug Limited 90-Day Warranty

Q: 5. Are the contents (cleaning fluid) approved for airline travel - checked baggage?

A: The ULTRA kit contains a 1/2 oz (15ml) bottle of Eclipse, a flammable liquid.So no is the short answer to your question. A cigarette lighter filled with lighter fluid (with about the same amount ) is allowed. Go figure. If you need to fly with an optic cleaner, try our AEROCLIPSE fluid which is equally effective and not considered flammable. David

Q: 6. My light stands are the short undercut style. Can the fixed pin and T-handle be swapped?

A: On the Kupo Grip Head with Fixed Baby Pin, the T-handle cannot be swapped with the knob.

Q: 7. If the Tx is fed signal via HDMI, will the local BNC loop thru / output transcode that signal lien the older 500 units did?

A: Yes, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter supports HDMI cross conversion. This would allow the HDMI input to output through the 3G-SDI. The Teradek Bolt 6 also would downscale 4k signals from HDMI to HD when outputting via the 3D-SDI.

Q: 8. Does this come with the circular plastic attachment that connects to a nano beam that goes over the pole mount?

A: All parts of the Ubiquiti Networks Quick-Mount for Ubiquiti CPE Devices can be seen in this image: https://bhpho.to/48seqze

Q: 9. Does this set include both the 'Disc' and the 'Base'?

A: This only includes the base not the disc. A kit with both can be purchased with sku #ARQLST, https://bhpho.to/3e0fUHt.

Q: 10. which one of these is compatible with the sirui svs75 tripod?

A: Unfortunately, the EHRO Field Solutions Accessory Support were not tested with the Sirui Svs75 Tripod at this time.

Patrick M	03/09/2024
[3/8" (10 mm)] This low profile mount lets me safely attach my monitor to a 5/8 baby stand. I can easily close the monitor case with it installed. 5

Edward	03/08/2024
[0.1 lb] I use these to rig LED tubes together, I'm sure these will also work well for rigging a camera to a vehicle. 5

Christopher	19/07/2024
[3/8" (10 mm)] The depth in this 9.Solutions VESA mount is as minimal as it can get, and for that, I absolutely love it. Worth the money. The ones Ive been buying for the past decade have a 2 pin in the back that have to go into a receiver on the C-stand, which all pretty much adds up to the same overall cost. The benefit of this low-profile, minimal depth mount are: 1) easy to pack any monitor with it in a flight case (easier mobility), 2) its inherently mounted on a stand at a perpendicular angle, and if thats not what I want, its easy to mount to the C-stand receiver tools that I would have been using anyway for the alternative mounts that I have (with the long pin in the back), then moveable in any direction of my choosing, 3) its sturdy and well-made, even, something few would likely notice, the provided M5 screws are high-end. For most monitors, this is an easy screw on and done deal... but, there are some monitors with recessed VESA mounting screw areas which will need a couple of smartly sized washers to provide stability beyond the recessed space and might need longer non-high-end M5 screws that only cost a couple of bucks. If I could trade in all my VESA mounts so that theyd all be this 9.Solutions VESA mount, I would do it in a heartbeat. Im that impressed, and have no hesitation in making this recommendation to others. 5

Rnar Ingi	16/07/2024
[1.4 oz (39 g)] It's a simple all metal design. I have it attached to an Atomos Sumo monitor/recorder and I really like it. When hung up on a C-stand the distance from the pole is very to the back of the screen is very short, which I like! So it's pretty much as small as it can be so it takes less space in a case. 5

Rnar Ingi	01/07/2024
[1.4 oz (39 g)] I use it on my Atomos Sumo and it's just what I wanted. You can't tilt it but I don't miss it when it's mounted to a c-stand. Seems to be built tough. 5

Mr Aw	26/06/2024
[1.4 oz (39 g)] This open gag is good when you have space constraints and can hook up and add another rod easily. Good quality, strong and steadfast. 5

Richard	12/06/2024
[0.1 lb] I'm using a nice 32 LG computer monitor as a client monitor and it works perfect as a lightweight compact way to do the job. 5

Alistair	17/05/2024
[1.4 oz (39 g)] Easy to attach to a monitor and to any stand no matter what the stand adapter is. I got mine with the tilt adapter for increased mobility options. 5

Kevin	24/04/2024
[3/8" (10 mm)] 9 solutions gear is strong and easy to work with. Changing the way we think and making rigging stronger, quicker, and easier. 5