Finish your installation with a clean look with the stainless steel Whirlwind WP1/1MW 1-Gang Wall Plate. It features a single-gang design with one Whirlwind WC3M male XLR terminal to pass your wiring through the wall, reducing the appearance of cable clutter.

1x Whirlwind WC3M Male XLR Terminal    1-Gang Design

Related Questions and Answers

Q: 1. So with this one box i can have two announcers or is it one announcer per box?

A: The THS boxes are designed for use by one announcer.

Q: 2. what is on the reverse side?

A: The reverse side of the Godox 5 x 6' Collapsible Background (Rusty Wall 11) is plain white.

Q: 3. Will this fit on the C400?

A: Yes, the Core SWX Battery Plate for Canon EOS Cine Cameras with 4-Pin XLR Input (V-Mount) is compatible with the Canon EOS C400 6K Full-Frame Digital Cinema Camera (Canon RF).

Q: 4. Can you use Sennheiser Headphone with boom mic's (Headset) with this machine? is it for one microphone set up only (i.e only one commentator)do you have Australian power plugs for these

A: Yes the THS4 with work with Sennheiser Headsets. It has one mic/headset input.We do not supply Australian power plugs, one can either use an adapter or find their own wall supply that has a 12 V AC 1 Amp output. See our website at a href= http://www.whirlwindusa.com target= _blank www.whirlwindusa.com/a to learn more and download the product manual.

Q: 5. I need a cable for my Sony evi-d70 security camera. Will this work? Do I need anything else? Thanks

A: No, the Sony VMC-MM1 Multi Terminal Cable, is not the right cable for the Sony EVI-D70. SD video is output via composite or S-Video connections: https://bhpho.to/2vzsYMN

Q: 6. Compatible with Sony a9?

A: Yes, the Sony VMC-MM1 Multi Terminal Cable will work with the Sony a9 Mirrorless Camera.

Q: 7. Can you print 2x3 wallets on ths DS-Tmini Kiosk?

A: It would depend on the printer model but yes you can set the DNP DS-Tmini Kiosk Order Terminal to print 2x3 wallet size photos.

Q: 8. Does this unit require external power? if so, how much and on what kind of connector?

A: The Whirlwind Line Balancer/Splitter requires no external power and is designed to split a single line level input signal into two balanced line level outputs. A choice of two output configurations is provided: one direct output and one isolated output, or two isolated outputs. The Line Balancer/ Splitter uses Whirlwinds TRSP-600L transformer and has a frequency response of 20 to 20kHz, 1dB @ +2OdBm.On the Line Balancer/Splitter are two male XLR jacks, one female XLR jack, a 14 jack and three switches as outlined below:INPUTEither of the two input connectors, a female XLR jack or a 14 TRS jack (Tip = Pin 2 and Ring = Pin 3) can be used for connection from a line level source, balanced or unbalanced. Use only one input at a time.OUTPUTSThe male XLR output connectors can be configured in one of two ways. The ISOLATED OUT/SPLIT 1 is always transformer isolated and the DIRECT OUT/SPLIT 2 is either directly connected to the input or transformer isolated, depending on the position of the OUTPUT SELECT switch.OUTPUT SELECTThis push-button switch selects the output mode of the unit. In the out position, the DIRECT OUT/SPLIT 2 provides a direct output signal and the ISOLATED OUT/SPLIT 1 provides a balanced 600 isolated signal. In the in position (the center of the switch changes to orange) both output connectors provide a balanced 150 ?isolated signal that is attenuated by 6dB from the input.GND/LIFTSEach of these switches disconnects the ground between the inputs and the XLR outputs when set to the LIFT position. Grounds remain connected when set to the GND position.This product is warranted to be free of defects in materials or workmanship to the original purchaser for a period of 3 years from the date of purchase.

Q: 9. I need a charger replacement for DSC-HX80, will this be compatible?

A: The Sony VMC-MM1 Multi-Terminal Cable is incompatible with the Sony Cyber-shot DSC-HX80 Digital Camera and not for charging the battery. Instead, I suggest getting the Sony BC-TRV Travel Charger, B&H # SOBCTRV.

Q: 10. I am confused as to the purpose of this cable. Doesn't the wireless commander attached to the Multi-function hot shoe, why would we also need this cable?

A: The Sony FA-WRR1 Wireless Radio Receiver is designed to trigger Sony-compatible flash units wirelessly. While there is a Multi-Interface hot shoe on the top of the Sony FA-WRR1 Wireless Radio Receiver, there is a cold shoe with no contacts (but with a 1/4 -20 tripod socket) on the bottom of the unit. While the cold shoe allows the Sony FA-WRR1 Wireless Radio Receiver to sit in the camera's Multi-Interface hot shoe, there are no pins or contacts for communication to the camera. It would simply sit in the hot shoe on the top of the camera for convenience when using it as a camera remote trigger (as well as on a tripod or light stand via the aforementioned 1/4 -20 connector). As such, if you wish to use the Sony FA-WRR1 Wireless Radio Receiver to trigger your camera's shutter release remotely instead of triggering a flash, you must electronically connect the Sony FA-WRR1 Wireless Radio Receiver to your camera via the Sony VMC-MM1 Multi Terminal Cable listed above.