Whirlwind Wp1B/1Mns 1-Gang Wall Plate Neutrik Xlr Black

Whirlwind Wp1b/1mns 1-gang Wall Plate Neutrik Xlr Black

Product Code: eq179396
Availability: In Stock

$117.00 $170.82

Qty

17 reviews Write a review

Description
Reviews (17)

Finish your installation with a clean look with the black Whirlwind WP1B/1MNS 1-Gang Wall Plate. It features a single-gang design with one Neutrik male XLR screw terminal to pass your wiring through the wall, reducing the appearance of cable clutter.

1x Neutrik Male XLR Screw Terminal 1-Gang Design

Parameters
Terminals	1 x Neutrik Male XLR Screw terminal
Gang Qty	1
Dimensions	Not specified by manufacturer
Weight	Not specified by manufacturer
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	4.5 x 4.4 x 0.6"

Related Questions and Answers

Q: 1. Does this plate support "PD" output up to 20W from its USB-C, when used with a standard L-Series battery?

A: The Tilta L-Series Battery Plate (Black) supports up to 18w of PD output power from the USB-C port when using standard NPF-L batteries.

Q: 2. Can the 15mm rod adapter be mounted to the top or bottom of the plate?

A: The 15mm rod portion of the Tilta PD V-Mount Battery Plate's position is not able to be moved.

Q: 3. How do I move the locating pins from the horizontal to vertical position? I’ve tried pulling them out with pliers with no luck.

A: You could use Needle nose pliers would allow you to remove the screws. The pins unscrew like normal screws.

Q: 4. Will this plate fit on the Olympus HLD-9 battery holder?

A: The lack Widow Thin Plate can support a maximum of 2 lbs. With a camera and lens, the total weight would be too much for this plate.

Q: 5. Can these be mounted to the ceiling?

A: Absolutely.... that's where mine is mounted. The only thing to keep in mind is that this is not an air cushioned item so if you are not supporting it fully it will just drop. I love mine and love having it on the ceiling.

Q: 6. Can I buy/order one of these with a 3/8" screw?

A: The Really Right Stuff B22 Multiuse Fore-Aft Plate with 3/8"-16 Screw is Arca-Type Compatible. This plate will fit the same tripods as the MeFOTO RoadTrip and GlobeTrotter Air Quick Release Plate. Here is the link: https://bhpho.to/3At93jr

Q: 7. Can you please list the USB-C PD voltages and amperes this supports?

A: Regarding the Tilta PD V-Mount Battery Plate (Black), the USB-C PD produces 60W and Tilta does not list the amperage.

Q: 8. Does the USB-C PD output power the Sony FX3?

A: Yes, the USB-C PD on the Tilta PD V-Mount Battery Plate will be able to handshake with the Sony fx3 and power it

Q: 9. Will this work with the Tilta FX6 Baseplate?

A: Yes, the Tilta fX6 baseplate is compatible with Tilta Dovetail plates.

Q: 10. Will this fit on the C400?

A: Yes, the Core SWX Battery Plate for Canon EOS Cine Cameras with 4-Pin XLR Input (V-Mount) is compatible with the Canon EOS C400 6K Full-Frame Digital Cinema Camera (Canon RF).

Henry	29/09/2024
[0.15 lb] Simple, straightforward wall-plate. Fits Neutrik Speakon jacks perfectly. 5

Anonymous	18/09/2024
[1] This will mount up to any box or mud ring. 5

Billy	13/09/2024
[1] B and H has all the equipment we need for out media upgrade project. The wall plate will make it possible to hide all the wiring for our stage rebuild. Great go to for all of our equipment needs. Although this item was on back order in several other vendors, B and H delivered above my expectations. 5

Michael	11/09/2024
[0.15 lb] This product works GREAT! This was a relatively short run (30') so Cat 5e worked just fine. Both devices powered from one end (Input TX) with this install. They were available, affordable and easy to install. The Power Supply is an inline DC supply, not a plug-in wall wart. This has been my go to HDMI extender kit. Kramer devices always works. 5

Patrick	01/09/2024
[1] Fit this Neutrik NA3FDM XLR Female to Male Feedthrough Adapter for Panel Mount into a RapcoHorizon SP-1DFN XLR Single Gang Wall Plate with 1 Neutrik NC3FD-L-1 Connector after knocking out the rivets, then re-riveting it to the plate. Then I fit it into a movable pulpit where the original jack had been abused and the soldered connections severed. In a church environment, who can fix that, and who needs downtime? Especially with very young and active kids! 5

Michael	19/08/2024
[0.15 lb] B&H is realy the king,concerning shipping and order accuracy. Everything was well packed . 5

Kolton	17/08/2024
[1] The plate looks great! 5

anyonymous	17/08/2024
[1] Don't let the picture confuse you; this frame will hold three seperate inserts. Also, the frame ships with three blank inserts in it already. If you are only planning to use two inserts there is no need to purchase a seperate blank insert. Simply remove two blank covers for the inserts you need and leave the third blank cover in place. This product is very easy to install and the inserts fit well and leave a clean finished installation. I am very satisfied with this product as well as the variety of inserts available. 5