Finish your installation with a clean look with the black Whirlwind WP2B/2NL4 2-Gang Wall Plate. It features a two-gang design with two Neutrik NL4 Speakon terminals to pass your wiring through the wall, reducing the appearance of cable clutter.

2x Neutrik NL4 Speakon Terminals    2-Gang Design

Related Questions and Answers

Q: 1. Do these still come in sets of three? Also, what else do I need to buy to mount these to a wall. Thanks!

A: That which you see in the picture is a set for one roll of paper. If you want to operate 3 rolls of paper, you need 3 of those sets. The 2 white things in the picture fit inside the opposite ends of the cardboard tube and can be expanded to fit tightly inside it. Thus installed they become the axle and bearing for the paper roll and they must be supported by some type of wall mounted angle brace that you supply. Once you have a wall mounted support capable of holding the paper rolls, you will need to make an additional simple adapter to hold the axles in place on top of your support.

Q: 2. Can these be mounted on stands?

A: Hi , in light stands no , there is some mount that you can use for that , but for me is better in the wall

Q: 3. What are some tips for keeping the paper from rolling onto itself when you roll it all the way up? The tension is great and everything works fine, just curious if I missed something or maybe doing something wrong. Do you add clips to the bottom of the paper to keep it tight/weighted when rolled all the way up?

A: You can use clips or a counter weight. https://bhpho.to/2kD2k4e

Q: 4. Can this Impact Varidrive be used with Manfrotto 047-2 Alu-Core for Uncored Paper or Cloth - 9' (2.7 m)BH #MA0472 MFR #047-2?

A: Yes, you could use the Impact Varidrive with Silver Metal Chain (B&H# IMVPDDSMC2) with the Manfrotto 047-2 Alu-Core for Uncored Paper or Cloth - 9' (2.7 m) (B&H# MA0472) or with the Impact Cross Pole for Uncored Paper or Fabric Backgrounds (106.3") (B&H# IMVPC5).

Q: 5. Can this support 140 -wide rolls?

A: Yes, it should be able to, just as long as you have secure wood backing on your wall and long screws (i.e. 1.5-2 ). The only concern would be the weight of the full roll. Perhaps just double check with the manufactuerer on the maximum weight that the hooks can take?

Q: 6. What is the inner dimensions of the pole you would use for this system?

A: The Impact Wall Mounting Kit with Metal Chain for Roll Paper is designed to be used with rolls of background paper.

Q: 7. I have a 95 and 3/4 inch wall and want to mount an 86” roll. Will it fit with the varidrive ends, cardboard core and brackets? I know it is very tight, any way to fit it though?

A: No, you will not have room to install the Impact Varidrive system on a 95 3/4’’ wall.

Q: 8. For the metal chain, there are no instructions as to how to put it on the drive, as there are for the plastic ones. The plastic ones come opened up so they can be closed after threading. All I can figure out is that the varidrive has to be dissassembled to install the chain, Is that correct?

A: Yes, the black knobs unscrew allowing access for the chain to the gear.

Q: 9. How far away do I need to mount it for a 107 seamless paper?

A: If you are referring to how wide you need to set up the brackets it is just a touch wider than the roll of seamless.

Q: 10. Is this wrinkle resistant? I bought some westcott backgrounds and they're great! No more steaming out wrinkles.

A: It is! It's great :-) the good quality of the product combined with the fact that it's textured means no wrinkles!