Whirlwind Wp2B/4Qw 2-Gang Wall Plate Black Finish

Whirlwind Wp2b/4qw 2-gang Wall Plate Black Finish

Product Code: eq179434
Availability: In Stock

$249.00 $348.60

Qty

17 reviews Write a review

Description
Reviews (17)

Finish your installation with a clean look with the black Whirlwind WP2B/4QW 2-Gang Wall Plate. It features a two-gang design with four Whirlwind WCQF 1/4" terminals to pass your wiring through the wall, reducing the appearance of cable clutter.

4x Whirlwind WCQF 1/4" Terminals 2-Gang Design

Parameters
Terminals	4 x Whirlwind WCQF 1/4" / 6.35 mm terminals
Gang Qty	2
Dimensions	Not specified by manufacturer
Weight	Not specified by manufacturer
Packaging Info
Package Weight	0.235 lb
Box Dimensions (LxWxH)	8.55 x 5.05 x 1.4"

Related Questions and Answers

Q: 1. Will it grip a 1 1/4" rod ?

A: No, 1 1/4" is too large.

Q: 2. Is this compatible with the sunwayfoto l bracket for canon 6 d?

A: The plate is not compatible with an L bracket. L brackets are for use in a quick release clamp. The heads of Mefoto Air tripods are too small a clamp to accommodate L brackets. The regular Mefoto tripods are compatible but not the Air versions.

Q: 3. Will this be compatible with Tilta 15mm LWSBaseplate Type IV? (For FX3)

A: Yes, the Tilta Arca/Manfrotto Dual Quick Release Plate is compatible with the Tilta 15mm LWS Baseplate Type IV for Sony FX3.

Q: 4. Can you please list the USB-C PD voltages and amperes this supports?

A: Regarding the Tilta PD V-Mount Battery Plate (Black), the USB-C PD produces 60W and Tilta does not list the amperage.

Q: 5. ARE THE 2 MONITOR ARMS AND STUDIO SPEAKER ARMS INCLUDED?

A: No, included In the Bo, with this Forecast Consoles GC1-MR Imagemaster Edit Console (Graphite Nebula Laminate Top Finish), would be the following/ Forecast Consoles GC1-MR Imagemaster Edit Console (Graphite Nebula Laminate Top Finish) Countertop Left Leg Assembly Right Leg Assembly Modesty Panel Assembly 4 x Cam Lock 4 x Cam Lock Pin Limited 1-Year Warranty

Q: 6. Does this plate support "PD" output up to 20W from its USB-C, when used with a standard L-Series battery?

A: The Tilta L-Series Battery Plate (Black) supports up to 18w of PD output power from the USB-C port when using standard NPF-L batteries.

Q: 7. Can I power a portkeys pt6 monitor with a power junkie dummy battery from the 12 volt power port?

A: No, the Power Junkie dummy battery is not compatible with the Tilta L-Series Battery Plate (Black). We recommend using the Blind Spot Gear Power Junkie V2 instead. See: https://bhpho.to/4aLknsr

Q: 8. What are the inner and outer barrel diameters of the DC outputs?

A: There are no barrel outputs on this device; only d-tap and those are all standard.

Q: 9. What size are the DC output pins?

A: The barrel sizes for the Tilta L-Series Battery Plate outputs are DC 5.5 X 2.5mm, which will fit in the 12V DC, and the DC 5.5 x 2.1mm, which will fit in the 8V DC. One is DC 12V:DC55-25:5.5-2.5mm, One is DC 8V:DC5521:5.5-2.1mm.

Q: 10. Does this have an on/off switch?

A: The Tilta PD V-Mount Battery Plate (Black) does not have an on/off switch.

anyonymous	25/09/2024
[0.235 lb] Don't let the picture confuse you; this frame will hold three seperate inserts. Also, the frame ships with three blank inserts in it already. If you are only planning to use two inserts there is no need to purchase a seperate blank insert. Simply remove two blank covers for the inserts you need and leave the third blank cover in place. This product is very easy to install and the inserts fit well and leave a clean finished installation. I am very satisfied with this product as well as the variety of inserts available. 5

Fahad	01/09/2024
[2] Very Good 5

Henry	23/08/2024
[2] Simple, straightforward wall-plate. Fits Neutrik Speakon jacks perfectly. 5

Billy	13/08/2024
[2] B and H has all the equipment we need for out media upgrade project. The wall plate will make it possible to hide all the wiring for our stage rebuild. Great go to for all of our equipment needs. Although this item was on back order in several other vendors, B and H delivered above my expectations. 5

Michael	08/08/2024
[0.235 lb] This product works GREAT! This was a relatively short run (30') so Cat 5e worked just fine. Both devices powered from one end (Input TX) with this install. They were available, affordable and easy to install. The Power Supply is an inline DC supply, not a plug-in wall wart. This has been my go to HDMI extender kit. Kramer devices always work. 5

Anonymous	04/08/2024
[2] This will mount up to any box or mud ring. 5

Patrick	19/07/2024
[0.235 lb] Fit this Neutrik NA3FDM XLR Female to Male Feedthrough Adapter for Panel Mount into a RapcoHorizon SP-1DFN XLR Single Gang Wall Plate with 1 Neutrik NC3FD-L-1 Connector after knocking out the rivets, then re-riveting it to the plate. Then I fit it into a movable pulpit where the original jack had been abused and the soldered connections severed. In a church environment, who can fix that, and who needs downtime? Especially with very young and active kids! 5

Michael	09/07/2024
[0.235 lb] B&H is realy the king,concerning shipping and order accuracy. Everything was well packed . 5

Michael	06/07/2024
[0.235 lb] This product works GREAT! This was a relatively short run (30') so Cat 5e worked just fine. Both devices powered from one end (Input TX) with this install. They were available, affordable and easy to install. The Power Supply is an inline DC supply, not a plug-in wall wart. This has been my go to HDMI extender kit. Kramer devices always works. 5