You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Maxxmove S60 Carbon Fiber Stabilizer 24"

Maxxmove S60 Carbon Fiber Stabilizer 24"
  • Product Code: eq179498
  • Availability: In Stock

$675.00 $911.25

The 24" S60 Carbon Fiber Handheld Stabilizer from MaxXmove is a lightweight, easy to operate stabilizer for stable multipurpose shooting. It is designed for any professional camcorder or DSLR camera, as well as a mobile phone with mobile phone holder, weighing up to 3.3 lb. The quick release plate on the unit is suited for easy docking thanks to an adjusting knob that is secure and easy to separate. The bidirectional baseplate can be adjusted freely in any direction thanks to the stabilizer’s high-precision bearings and low-friction joints. The gimbals operate smoothly for accurate, shake-free motion, enabling this unit to extend quickly for shooting at higher angles. The stabilizer is also fitted with an ergonomically crafted grip handle for smooth, comfortable operation.

Parameters
MaterialsCarbon fiber
Aluminum alloy
Payload Capacity0.4 to 3.3 lb (0.2 to 1.5 kg)
LengthMinimum: 15.16" (38.5 cm)
Maximum: 23.62" (60.0 cm)
Dimensions15.16 x 4.72 x 3.94" (38.5 x 11.98 x 10.0 cm)
Weight2.65 lb (1.2 kg)
Packaging Info
Package Weight4.8 lb
Box Dimensions (LxWxH)16.4 x 9.9 x 5.5"

Bidirectional baseplate with fine adjustment system can be adjusted freely to any direction

Pulling the adjusting knob can separate the quick release plate from the base

High-precision bearings and low-friction joints

Stretch adjustment reduces the clump weights considerably

Can be extended quickly for shooting at a higher angle

Polished chrome counterweight

Smooth gimbals for accurate motion

Comfortable grip handle

Related Questions and Answers

Q: 1. Is this stabilizer Arca-Swiss compatible?

A: The camera plate is propitiatory, it is not Arca-Swiss Compatible.

Q: 2. Could I put a center column and arca Swiss cube on this?

A: You can use the arca Swiss cube with our with out a center column. The column for the Really Right Stuff TVC-24 Versa Series MK2 Carbon Fiber Tripod is, https://bhpho.to/3uwFOu3 .

Q: 3. Would the FlexShooter Pro fit on this mount? I want to use my Sony 200-600 for bird photography on this setup.

A: Yes the Flexshooter Pro would fit this tripod.

Q: 4. What levelling base (for panoramas) would be best for this tripod (in terms of function, fit and cost effectiveness)?

A: The LE-60 was way too stiff for such a light tripod. The Acratech leveling base is perfect.

Q: 5. I bought this thing. There is no instructions included. The height doesn't adjust. It is not user friendly! Are there instructions online???

A: For help locating an instruction manual feel free to email us directly at askbh@bhphoto.com.

Q: 6. How big is the platform? Will Acra swiss Z1g+ ball head fit in?

A: You would be better off mounting the Arca Swiss Z1g+ on a a series 3 tripod https://bhpho.to/2Xqt9Gm.

Q: 7. What's the weight of this stabilizer?

A: The weight of the box the gimbal come in is 5.70 lb.

Q: 8. What is the diameter of the base for ballhead?

A: It's 2.36".

Q: 9. Is this compatible with the Manfrotto 500PLONG plate?

A: Not that we are aware of. This stabilizer has a propitiatory base plate.

Q: 10. Would the FlexShooter Pro head fit on this mount?

A: Yes, the Flexshooter Pro would mount on this tripod

24/09/2024

[4.8 lb] This thing is pricey, but to extend stylus life and performance, it's a must have.

5
23/09/2024

[4.8 lb] This is a very good value for the money. Well made and very rugged. 
A minor issue is that it does not come with any assembly instructions or camera balancing instructions. I recommend looking at some on-line videos on balancing stabilizers. For a first time user of stabilizers the balancing process is not intuitive. Once properly balanced for a specific camera it works very well.

5
15/09/2024

[4.8 lb] I'm a cinematographer and regularly use glidecam hd-2000 with dslr's such as 5D's and 1Dx mark II, I also often use a Glidecam Hd-4000 with a C300 mark II, and even own a giant came-tv vest and stabilizer rig with wires for batteries and monitors going through it. I hate that big thing because there's no real freedom of motion for rising shots etc and it takes forever but i'm sure for walking shots on a movie set or something it's just right. Anyway I'm a strong believer in no vest because you get so much more shots you can capture. This stabilizer is amazing in every way. It is super portable which is important so you have it. Faster to setup. Stable when set down (much more than glidecam since those can tip to the side easier than this one). This looks better, and is carbon so more efficient with weight just for balancing, smaller shaft and bearing means less friction introduced through the bearing. It's extremely smooth. Has smooth position knobs without the extra unnecessary locking screws on the glidecam. This has exactly what you need with nothing extra. it's simple to start on and excellent enough for a pro. It can handle my 5D mark III with a 16-35mm 2.8 L which is a heavy setup. It even just scraped by at the edge of balancing same camera with a 50mm 1.2L. I plan on getting� some extra weights to make sure I'm set with various cameras such as if I have to put a lav receiver on the hotshoe for single mic work solo shoot with mic running into the camera. I wish they made an identical but just slightly bigger version to compete with glidecam hd2000 size but most small stabilizers handle fine if you add more weight to them. Don't hesitate to buy this. I would recommend this as the most important item to shoot with over a slider, over a tripod (shots need motion people!)

5
17/08/2024

[4.8 lb] I was hesitant about spending so much money on a set of tripod legs, but as soon as I took them out of the box I was impressed. Quality all around. Light weight, holds my Canon 5D MIV and EOS 100-400mm lens like it is a feather.
As I get older, I need the assistance of a tripod to get the sharpest images. I also want to get back to the old days of  throwing my camera gear in the back of the car and explore and photograph the countryside, near and far. With this tripod, I can do just that.


I am a true fan of Really Right Stuff. I am also glad that B&H now provides their gear.

5
16/08/2024

[4.8 lb] I originally ordered the 24L but sent it back. The 24L is perfect for astrophotography given its height. But my general use for the tripod is landscape and nighttime cityscapes which require a lot of hiking and walking and often a plane ride to get to the destination. The 24L was just too big and cumbersome to manage on a plane and walking around with a backpack. The standard TVC 24 is a little short for me, maybe 3-4 inches (I'm 6'3"). But I will take it more places and therefore use it more often. Build, stability craftsmanship are phenomenal. So far, I used it with a D850 and a 16-35 f4, 70-200 E, and a 200-500 f 5.6. RRS is an exceptional company. Expensive, but very happy with my decision.

5
14/08/2024

[4.8 lb] I only wish it had a bright colored handle and housing so it was easier to find and handle in dim light situations.

5
04/08/2024

[4.8 lb] Best stylus cleaning brush ever !! A must for an accurate and noise-free tracking of all records. The carbon fiber size, length, density, and circular placement of the bristles on the brush head make it extremely effective at stylus cleaning without damaging the stylus/cantilever assembly.

5
27/07/2024

[4.8 lb] I got one extremely light weight and durable I wouldn’t buy another tripod like this ! Very blessed for bhp they even made sure my order was correct and New un damaged any questions they answered and took care of me ! I only purchase here !

5
15/07/2024

[4.8 lb] This glide cam performs as well or better than my old Glidecam HD 2000 and better than a $300 competitor product I am now returning. I am using this with my Canon 5d Mk3 and it balances perfectly. Proper setup is key, make sure you balance with the least weight you can get on the bottom and have a 2 second drop.

5
14/07/2024

[4.8 lb] For my $20000 Leica M10P and Noctilux f/0.95 50mm lens, I will trust nothing less than the RRS tripod and head.. why? Because I'm not going to cut corners on anything, especially if it's supporting one of the worlds most expensive consumer cameras and lens.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Impact Air-cushioned Light Stand Black 10'

$146.85 $185.03

Louroe Le-052 Verifact A Usb Microphone

$599.85 $761.81

Tiffen 81ef/nd Filter 138mm 2-stop

$989.85 $1,187.82

Neewer 40.5mm Variable Nd Filter 1-5 Stop

$127.47 $187.38

Cable Techniques Bud Ii Battery Distribution Kit

$1,199.97 $1,787.96

8sinn Top Handle Pro Camera Bag

$297.00 $362.34

Kramer Swt3-31-hu 3x1 4k60 Usb-c Hdmi Switcher

$3,240.00 $4,698.00

Sachtler Sa1016 Mini Hood For Cameras

$55.50 $70.48

Alto Busker 200w Portable Pa With Bluetooth

$1,047.00 $1,591.44

Arri Diopter Frame 138mm Matte Box Accessory

$1,320.00 $2,019.60