The Lectrosonics L Series Wireless Microphone System RE50B Kitfrom Lectrosonics L Series Wireless Microphone System RE50B Kitis a UHF plug-on transmitter that accepts mic or line-level signals via a standard XLR connector. The transmitter is designed to be paired with a Lectrosonics receiver and handheld microphone (sold separately)for use in applications for ENG (Electronic News Gathering), EFP (Electronic Field Productions), interviews for broadcast TV, and more. The HMa offer phantom power selectable at 5, 15, and 48V—allowing it to work with a wide variety of condenser mics. Of course you can switch the phantom power off entirely if you're using a dynamic microphone.

The input amplifier of the HMa transmitter uses an ultralow-noise op-amp for quiet operation and offers input gain control along with a wide-range dual-release envelope limiter. A 24-bit A to D converter digitizes the audio, and filters the supersonic noise above 21 kHz. The resulting signal is encoded with a proprietary algorithm to produce an analog data signal for RF transmission.

This version of the HMa features a tuning range of 67 MHz, with tuning steps in increments of 100 kHz or 25 kHz, and is set for use in the A1: 470 to 537 MHz range. DSP compatibility mode allows the transmitter to work with legacy analog wireless microphone and IFB receivers as well as some receivers from other manufacturers.

Finally, the transmitter is powered by two AA batteries, with status indicated by a multi-color LED. A USB port is also provided for firmware updates, and an IR (infrared) port is included to simplify setup with IR enabled receivers.

System for Handheld Interviews    Electro-Voice RE50B Omni Broadcast Mic    HMa Plug-On Transmitter with Phantom    LR SmartDiversity Camera-Mount Receiver    Low Handling Noise & Wind Protection    3072 Auto-Scan Frequencies    Adjustable 50/100 mW RF Output Power    Compander-Free Digital Hybrid Audio    4-Hr AA Batteries    Up to 30 Mics on Set / 350' Range

Digital Hybrid Wireless is a revolutionary design that combines digital audio with an analog FM radio link to provide outstanding audio quality and the exemplary RF performance of the finest analog wireless systems

Multi-color LED status indicator

Selectable 50/100 mW output power

67 MHz tuning range in 100 kHz or 25 kHz steps

The antenna is formed between the machined aluminum housing of the transmitter and the attached microphone or cable. It functions as a dipole radiator when attached to a hand-held microphone and somewhat like a ground plane antenna when connected with a cable or plugged directly into a mixer

Related Questions and Answers

Q: 1. Does it record each channel separately?

A: Yes. The Saramonic Blink Me 2-Person Clip-On Wireless Microphone System does have a built-in recording feature on the transmitters, allowing them to record audio from each mic directly onto the transmitter's internal memory. Additionally, the receiver has 3 output settings: Mono, allowing you to record the mics mixed; Stereo, separating the mics to the left and right outputs; or Safety Mono, mixing the mics with a full signal on the left and a -6 dB safety track on the right. So you can record audio with the two mics separated onto different channels when using the Stereo output setting.

Q: 2. does it come with a carry case, if not do you sell a carry case?

A: A carrying case is not included. Hree is a compatible case: Gator Cases - GM-1W Wireless Mobile Pack: B&H# GAGM1W

Q: 3. The go pro hero support USB C. Is your microphone powered by battery?

A: The wireless transmitter included with the LAVOKOL B1 Wireless Microphone System for USB Type-C Devices has a built-in rechargeable battery that lasts up to five hours and the wireless receiver has a USB Type-C port for charging pass through which allows it to draw power from the host device that it is connecting to.

Q: 4. How do I pair them

A: for me it was plug and play , or use the channels on each mic till you hear a sound

Q: 5. I lost one of the microphones, do you sell just one microphone as a replacement piece?

A: No, the transmitters for the SmallRig Forevala W60 2-Person Compact Wireless Microphone System are not available to purchase individually through retailers, but you may be able to get a replacement directly from the manufacturer.

Q: 6. Does it do backup recording on the reciever like th dji mics?

A: No, the SmallRig Forevala W60 2-Person Compact Wireless Microphone System does not have a built-in recording function on the transmitters for backup recording like the DJI Mic 2-Person Compact Digital Wireless Microphone System/Recorder or the Rode Wireless GO II 2-Person Compact Digital Wireless Microphone System/Recorder.

Q: 7. Good evening, can I use this lapel microphone with the SmallRig Forevala W60 system?

A: Yes, you can use most lapel microphones that are equipped with a standard 1/8" (3.5mm) TRS male connector with the SmallRig Forevala W60 2-Person Compact Wireless Microphone System.

Q: 8. Can additional transmitters be paired with one receiver? I would love to have 3-4 mics attached to the receiver in my scenarios.

A: The receiver in the JOBY Wavo AIR 2-Person Digital Wireless Lavalier Microphone System (2.4 GHz) can connect to a maximum of two transmitters at one time. Increasing the number of transmitters would require more receivers to accommodate them.

Q: 9. Can someone explain why they would make half of it red and not all black?

A: The aesthetic makeup and color choice on the JOBY Wavo AIR 2-Person Digital Wireless Lavalier Microphone System is likely meant to differentiate this JOBY system from the many other similar product offerings in this category.

Q: 10. This system has 16 bit audio instead of 24. Does this make a huge difference?

A: A higher bit depth will enable higher dynamic range. 16-bit audio has a dynamic range of 96 dB, and 24-bit audio has a range of 144 dB.