Greatly extend the reach of your current network with the EnGenius ENStationAC Kit - High-Performance Wireless Solutionfrom EnGenius. With a transmit power of up to 26 dBm this wireless bridge emits a signal capable of extending the network up to 5 miles in a point-to-point configured setup. Additionally, the IP55-rated housing ensures it will hold up against the elements including prolonged exposure to sunlight, extreme cold, snow, sleet, rain, heat, and humidity.

The EnStationAC can be configured as an access point, client bridge, or as a wireless distribution system (WDS bridge) to suit the needs of a variety of network configurations. To support bandwidth intensive applications this wireless bridge operates on the 5 GHz frequency and supports the 802.11a/n/ac networking standards with a maximum data transfer rate of up to 867 Mbps. Complementing the enhanced wireless network capabilities, you will find a single PoE compatible Gigabit Ethernet input and a single PoE compatible Gigabit Ethernet output perfect for powering an additional PoE compatible device. Once installed the EnGenius EnStationAC features a 360° 3-axis pivoting arm to ensure a proper line of sight and strong connection.

Extend Your Network up to 5 Miles    11ac Wireless Speeds up to 867 Mbps    2 x Gigabit PoE-Compliant Ports    360° 3-Axis Pivoting Arm    1 x 19 dBi 5 GHz High-Gain Antenna    Transmit Power Up to 26 dBm    2x2:2 MIMO Radio Chains    Point-to-Point & PtMP Support    Supports 8 SSIDs    WEP/WPA/WPA2 Encryption Standards

The EnStationAC supports fast 802.11ac wireless speeds to 867 Mbps on the 5 GHz band for accommodating 4k Ultra High Definition (UHD) video and heavy multi-application traffic services with extended bandwidth over a wider channel range (20 MHz, 40 MHz and/or 80 MHz) allowing network managers to fine tune channel usage based on the application.

With its secondary 802.3af-compliant PoE pass-through Gigabit port, EnStationAC connects and powers an additional PoE-compatible device like a remote IP surveillance camera or AP for greater deployment flexibility and convenience. Easily position EnStationAC for maximum connectivity with its 360-degree, 3-axis pivoting arm that locks in place, ensuring precise alignment between other EnStationAC devices.

The EnStationAC is ideal for Point-to-Point (PtP) applications over short or long distances where cabling is not possible or practical. Longer ranges can be achieved when paired with another EnStationAC in a PtP deployment by aligning the dish-shaped, 19 dBi dual-polarized, high-gain antennas to face each other, ensuring each gets the full impact of the narrow-focused, wireless beam, reducing frequency interference over long distances.

Deploy the EnStationAC where power outlets are scarce or unavailable, such as under the eaves of roofs, high atop light poles or in other remote locations up to 328 feet away. Power the unit via the included passive 54 V Gigabit PoE adapter (EPA5006GP) while protecting valuable network equipment from power surges or short-circuits associated with lightning strikes and electrostatic discharge (ESD).

The EnStationAC supports three operation modes - Access Point, Client Bridge, and WDS Bridge mode. This flexibility makes the Access Point/Client Bridge a versatile solution for IT managers who may need to update or reconfigure their deployments, as their network needs change.

Designed to perform in harsh environments, the EnStationAC features IP55-rated waterproof and dustproof casing that ensures it can withstand harsh outdoor climates and indoor industrial environments. This includes prolonged exposure outdoors to sunlight, extreme cold, frost, snow, rain, hail, heat and humidity, and indoors where temperature may be a factor.

Related Questions and Answers

Q: 1. Will it be too big for a rigged out zv-e10?

A: The PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) would be quite a bit larger in comparison to the Sony ZV-E10, considering the 4.5" width of the camera versus the 6.9" width of the monitor.

Q: 2. Will it conect to a sony a6400 via bluetooth?

A: At this moment the Sony A6400 is not listed as supported when using Bluetooth, and the PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control. Current supported cameras: https://bit.ly/3U3aLEu

Q: 3. Could this be used for tethering photo from sonya7r4?

A: The PORTKEYS LH7P supports wireless camera control ( Control Record, Shutter, Focus & More) available via the integrated wireless module for Blackmagic Design cameras such as the Pocket Cinema Camera 4K/6K/6K Pro, and Sony cameras, including the a1, a9, a7C, FX3, FX10, a7S III, a7 IV, RX0, and a7 III. The display connects with your camera via HDMI cables. True tethering would require a computer plus software like Lightroom, and Capture One Pro. Capture One Pro 11 (Key-Card) BH #CAC1PRO11KC

Q: 4. Is this compatible with a Canon M50 Mark II? Will the battery from a Portkeys PT6 Monitor work with this monitor?

A: Yes, the Canon M50 Mk II would work with the PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) for video but not control. The Portkeys PT6 also works with the same SONY NPF-L batteries like the PLH7P. Your batteries will work with the new display. ZILR Hyper-Thin High-Speed Micro-HDMI to HDMI Cable with Ethernet (17.7") BH #ZI4KP60M17 • MFR #ZRHAD01 Genaray 2 x NP-F770 4400mAh Batteries & 2 x Compact Chargers Kit BH #GENPF770CS • MFR #BCK-2NPF2CH4400

Q: 5. Can it enter/exit playback on Blackmagic Pocket Cinema Camera 6K, to review clips on camera, when camera on crane beyond reach?

A: Unfortunately, you cannot access playback on the Blackmagic Pocket Cinema Camera's touch screen and then the Portkeys LH7P Monitor.

Q: 6. Will this work on the Sony FX6?

A: Yes, the PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) is compatible with the Sony FX6.

Q: 7. Is the USB Type A power input Male or female?

A: The USB ports on the PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control are all female.

Q: 8. Will this work with Blackmagic 6K G2??

A: The PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control lists the Blackmagic Pocket Cinema Camera 6K as touch compatibility.

Q: 9. With the new MOVNORM OS Firmware Update, does it finally have a clean HDMI output signal without the user interface showing?

A: The PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) does not have a clean HDMI output as of the February 2024 firmware update.

Q: 10. What kind of cable power I need for powering this monitor to a V-Mount Battery Plate?

A: The PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black), B&H # POLH7PB, accepts a USB-A or a coaxial barrel (7-24DC) input. Depending upon the output ports on the V-mount battery plate, either a USB-A or a D-Tap cable could be used.