Upgrade the memory in your compatible system using the 16GB DDR4 2400 MHz UDIMM Memory Kit (2 x 8GB)from Crucial. This memory kit features a total capacity of 16GB, which is made up of two 8GB modules, as well as a clock speed of 2400 MHz (PC4-19200), a 288-pin DIMM form factor, operates using 1.2V, has a CAS latency of 17, is unbuffered, and does not use ECC technology. Adding more memory to your system will help boost its capabilities, including improving system performance and application responsiveness. Start-up times will be improved with fewer delays during routine operations, and more programs will be able to run simultaneously with easier switching between them. This memory module is protected by a limited lifetime warranty.

16GB (2 x 8GB) Capacity    2400 MHz Clock Speed    PC4-19200    288-Pin UDIMM    1.2V    CL=17    Unbuffered, Non-ECC    Single Ranked    x8 Based    1024 Meg x 64

Load applications faster and run demanding programs without lag. Crucial DDR4 UDIMM 2400 MT/s modules are more than 30% faster than DDR3 modules.

Operating at just 1.2V compared to 1.5V for standard DDR3 memory, the DDR4 consumes 20% less voltage than standard DDR3 technology. The module also contains other efficiency features, for an overall power reduction of up to 40%.

The DDR4 UDIMM increases memory bandwidth by over 30%, allowing your system to handle more data at once. The DDR4 is optimized for next-gen platforms, allowing you to maximize bandwidth.

Related Questions and Answers

Q: 1. Will this fit in a FLEX-15iwl Part Number: 81SR000UUS?

A: Yes, it is compatible.

Q: 2. Is this product work on iMac (Retina 5K, 27-inch, Late 2015) ???

A: No, unfortunately the iMac (Retina 5K, 27-inch, Late 2015) would require 1867MHz DDR3 memory; four SO-DIMM slots, user accessible, Configurable to 16GB or 32GB.

Q: 3. Will work with hp omen 15 laptop ( 2019) model ?

A: Yes, it is compatible. The computer might step down the speed to 2666 Mhz.

Q: 4. Anyone know if this will work with a late 2015 21.5 inch 4K IMac? Has a processor of 3.1 GHz and the current RAM is 8 GB 1867 MHz DDR3

A: The RAM on the iMac 21.5" (late 2015) would be built in and would not be upgradable.

Q: 5. Is it compatible with an HP EliteDesk 800 G6 mini desktop with DDR4 2933 MHz?

A: No, the speed of this memory kit (3200 MHz) is too high for the HP EliteDesk 800 G6. According to the manufacturer's specs, 2933 MHz is the maximum speed supported by this computer.

Q: 6. Is this compatible with iMac (Retina 5K, 27-inch, 2017)?

A: Yes, it's working perfectly fine in my iMac retina (2017) 27 inch model. I added in 64 GB from two of these kits. Easily slid into the RAM slots

Q: 7. I have a iMac (Retina 5K, 27-inch, 2017) with two of the original 8GB memory cards, Can I add two 16GB cards into the two empty bottom slots for 48GB total?

A: Yes, you can add two 16GB for a total of 48GB. RAM is accessed in parallel, meaning the system will divide use all RAM modules equally up to 32GB. If you are utilizing more than 32GB of RAM, the system will not be as efficient as if you had installed three 16GB modules.

Q: 8. Will this work with my HP Zbook 17 G4, core i7 Quadro M2200?

A: Yes this chip is rated to work with that model of laptop.

Q: 9. Will this work for the new 2018 Mac mini?

A: No. But the following would work https://bhpho.to/2lMGmfU

Q: 10. Can this work on desktops?

A: SODIMM Memory is typically designated for Laptop computers. IMacs and Mac Minis are the exception .