The RAM Mounts Strap Clamp Roll Bar Mount 1" Ball GoPro Adapterfrom RAM Mounts Strap Clamp Roll Bar Mount 1" Ball GoPro Adaptercan be used to attach your GoPro HERO to not just roll bars, but to almost any tube with a diameter of 1.5" to 3". The included U-bolts are used to attach the mount to ATV handlebars or other tubes from 0.5 to 1.25" in diameter. It features a steel-strap base, a 1" ball and socket, two sizes of U-bolts, and a double-socket arm. Together, these components enable almost any adjustment needed to obtain a level camera position.

This mount works with most HERO models and many other action cameras using a standard GoPro-style three-prong connector. The HERO adapter attaches directly to the bottom of the camera, in place of the standard mounting bracket.

Strap Fits Roll Bars from 1.5" to 3"    U-Bolts Fit Roll Bars from 0.5" to 1.25"    Works with Most HERO Models    Adjustable Double-Socket Arm    1" Rubber Ball & Socket System

Steel strap base will fit roll bars or tubes from 1.5" to 3" in diameter, U-bolts fit diameters from 0.5"-1.25"

Compatible with most GoPro HEROs and other action cameras equipped with GoPro-style three-prong connectors

Dual-socket arm with 1" ball socket adjusts to almost any angle to obtain a level camera position

Related Questions and Answers

Q: 1. Does it work with Hero 6 and Hero 7 ?

A: Yes this works with a GoPro Hero 6 and 7 series action cameras.

Q: 2. is this head strap compatible with GoPro Hero 5?

A: Yes this will work with the Hero 5. I tried it already

Q: 3. Will this work with Benro tripod arms?

A: No. The following unit is designed and made for the MVR901EPLA, MVR901EPEX tripod units.

Q: 4. Is this compatible with Olympus Stylus Tough TG-Tracker Action Camera?

A: Yes it is.

Q: 5. Is this go pro head strap compatible with Drift cameras??

A: yes

Q: 6. Can this be mounted to the Phottix mini boom 16 by replacing the cold shoes with this mount? In other words, can you mount these directly to a 1/4 thread w/o using the stud?

A: Yes, the stud screws on with typical 1/4 20 thread that most stands and tripods use.

Q: 7. I plan on using this tripod for live streaming with my cell phone. What is the largest width the phone holder can handle?

A: The Smartphone Adapter included with the Magnus GP-100 Light-Duty Tripod is compatible with phones up to 3.5" wide.

Q: 8. Is it compatible with nikon d800?

A: I would personally not recommend using the Nikon D800 DSLR camera on the Magnus GP-100 Light-Duty Tripod. The Nikon D800 DSLR camera body only with the battery weighs 1.98 lb. The Magnus GP-100 Light-Duty Tripod has a maximum load capacity of 2.5 lbs. As such, most every lens used on the Nikon D800 would make the camera/lens setup over the tripod's maximum load capacity, and especially if you use a flash on the camera. My recommendation would be to purchase a tripod with a higher maximum load capacity rating. If you must have a Magnus tripod, at minimum, I would recommend the Magnus PV-3330G Photo/Video Tripod with Geared Center Column, B&H # MAPV3330G, while the Magnus TR-13 Travel Tripod with Dual-Action Ball Head, B&H # MATR13, would be a better option for your usage needs.

Q: 9. I just received this item. When I mount the bar to a set of tripod legs and turn the rubber wheel to tighten the screw, the wheel is very difficult to turn and sometimes I need both hands to turn it. Has anyone else experienced this?

A: It will depend on what you mean by difficult. The central thumb screw under the center of the Mounting arm is manufactured from rubber for better grip, but it can seem a bit awkward to to tighten. Two tips would be to 1) Ensure the screw on the bottom center of the Mounting Arm is properly seated on the screw on the top of your tripod's center column, and 2) Try holding the thumbscrew dial and instead, turn the entire bar clockwise to tighten the mounting bar to the center column on your tripod. While it should not be overly difficult if you are following the above instructions and the instructions listed in the instruction manual, and you still seem to be having issues with connecting the mounting bar to your tripod, I would recommend contacting Oben directly for assistance with the Mounting Bar either by calling them at (212) 594-2120 or by e-mailing them at info {at} obensupports {dot} com. If you purchased the item within the last 30 days, you may also contact our Customer Service Department to inquire about returning the item for an exchange or a refund.

Q: 10. What is it made up of? Metal or plastic? I ask because I've used a lot of plastics before and all break at the bolt site in no time or simply don't even get tight enough to hold the wind if attached to a car base.

A: The Revo Tripod Adapter with 1/4"-20 for GoPro is made of plastic and will have a metal female 1/4-20" mount located at the bottom.