Japan Camera Lens Suction Vacuum Tool For Hobby

Product Code: eq179784
Availability: In Stock

$81.00 $107.73

Qty

20 reviews Write a review

Description
Reviews (20)

Take advantage of the Japan Camera Lens Suction Vacuum Tool for Hobbyfrom Japan Hobby Tool when you need to install or remove the lens of your camera without using your fingers. The Super Suction Vacuum provides a vacuum seal for your camera lens while keeping it free of stains, grease, or smudges. It proves to be an effective method to remove your lens as well, especially if it is located deep in the back of your camera.

For best results, clean the surface of the lens you will be installing or removing with liquid either before or after using the Super Suction Vacuum.

Vacuum Seal Camera Lens Allows Lens to Remain Clean No Stain, Grease, Smudges Left Behind Effective Method to Remove Lens Easy to Use

Parameters
Material	Special rubber Stainless steel
Dimensions	Long pipe: 4.1" (105.0 mm) Short pipe: 2.7" (70.0 mm) Big suction: 1.3" (35.0 mm) Small suction: 0.7" (20.0 mm)
Weight	Not specified by manufacturer
Packaging Info
Package Weight	0.145 lb
Box Dimensions (LxWxH)	5 x 4 x 1.75"

Related Questions and Answers

Q: 1. Is the arm removable?

A: Yes, the arm is removable on this mount.

Q: 2. will this stick on a marble wall?

A: No it will not.

Q: 3. Where can replacement filter pads be obtained?

A: https://www.bhphotovideo.com/c/product/1405646-REG/fujin_fl_001_electrostatic_filter_set_with.html

Q: 4. I would like to mount this to the exterior of a glider which is extremely smooth (gel coat fiberglass) and I am not sure if it will stick at top speed. Will this mount hold on at 300 km/h?

A: I am not sure. I guess that the sucction is not enough to resist this high speed. Better something that be glued externaly.

Q: 5. Does Delkin Devices Fat Gecko Dual-Suction Cam work with GoPro Hero4?

A: It would work with a GoPro as ling as you have the GoPro adapter, I have a attached a link to said item https://bhpho.to/3u7MI7X

Q: 6. Is this useable as a roof mount for a very lightweight 360 camera and a short 3-4' sturdy monopod stick? Updating some Google maps stuff in my area.

A: The can be mounted to the roof of a car and can attach up to 8lbs to a moving car.

Q: 7. I would use the fat gecko on the deck of my kayak,Is it stable enough in the wind & getting a little wet?

A: I think this can withstand 60+ mph wind on the hood of a car so I imagine it would work on your kayak. Just make sure the surface when you first stick it on is dry and clean.

Q: 8. What is the diameter of the suction cup area?

A: The Delkin Devices Fat Gecko Stealth Single Suction POV Camera Mount has a diameter of 3.4Inches.

Q: 9. What is the specific name/part no. for the replacement 3M filter? I can't find it on their website.

A: This came from Rob K, B&H: Our buyer just gave me the bh number for it,BH # FUFL001It is not in the system yet but should be soon.

Q: 10. Can u use it with my phone

A: In order to use with a phone, you would need an adapter attachment. I would suggest the following https://bhpho.to/3qvZbQG

David	26/09/2024
[0.145 lb] Did the job, removed a long stuck filter 5

Sean	18/09/2024
[5 x 4 x 1.75"] I've been cleaning and repairing vintage lenses and cameras for a while now and this tool makes it so much easier to get to the difficult to reach lenses without leaving marks on them after cleaning. Highly recommended. 5

Don	15/09/2024
[5 x 4 x 1.75"] Man I love this tool! Didn't realize how much easier working on old lenses could be until I started using these lens suckers. Very strong suction. Highly recommended if you like to dyi lens cleaning/repairs. 5

Evelyn	12/09/2024
[5 x 4 x 1.75"] had an adapter stuck on a lens, and couldn't get a good grip to remove it. these worked to remove the adapter in seconds, perfectly, easily, and more safely. 5

Vincent	07/09/2024
[0.145 lb] The tool set lets you open parts without damaging or leaving scratches on the parts. It's better to have some protection on the glass surface before using them to open or close a lens. 5

Daniel	07/09/2024
[5 x 4 x 1.75"] Not the cheapest on the market but they do work really well 5

Robert	04/09/2024
[5 x 4 x 1.75"] The Lens Sucker arrived in the afternoon of Wed. 28 November in perfect condition throughout and works perfectly in use. 5

Kirk	29/08/2024
[5 x 4 x 1.75"] You really need something like this if you are going to go digging after tiny pieces of precision glass deep inside a lens. Very tight grip, can actually unscrew elements. Allows you to handle lens elements without getting your greasy fingerprints all over them. Sometimes it can be a bit difficult to get the thing to let loose of the glass if you squeezed all the air out of it when you attached it. 5

Thomas	09/08/2024
[5 x 4 x 1.75"] it works as it promises ! used right now on old Minolta cameras and lenses. Product price is absolutely proportioned ! Great service and support of B&H and superfast shipping ! Compliments sincerley !!! ... but note, if you are outside US as I am (EU), shipping doubles the costs . But it's still more conveniant than on amazon and arrives much faster. The only little complain/comment is that customs and duties, as in automatic check-out, are calculated a bit higher than the effective cost I paid done with pay at receiving (14,13 USD vs. 11,18 USD). For professionals with registrated VAT-Nr. the second mode gives also the chance to have a regular invoice from shipping company to be deduced. 5