Miniature Swarovski Range Finder Camera Charm Antique Brass

Product Code: eq179796
Availability: In Stock

$42.00 $65.10

Qty

14 reviews Write a review

Description
Reviews (14)

Add some flare to your wardrobe with this antique brass Miniature Swarovski Range Finder Camera Charm Antique Brassfrom Japan Tool Company. The charm is manufactured in Japan and made of tin and synthetic leather.

Decorative Charm Made of Tin and Synthetic Leather Made in Japan

Parameters
Materials	Tin, synthetic leather and Swarovski
Packaging Info
Package Weight	0.01 lb
Box Dimensions (LxWxH)	6 x 2.5 x 1"

Related Questions and Answers

Q: 1. Is this the same as the new DJI Lidar Pro?

A: The DJI LiDAR Range Finder for RS 3 Pro increases the ranging points from 43.200 to 76.800 ranging points. The additional ranging points would mean the new Lidar focus Pro will be more accurate. Also, the maximum range has been increased from 46 feet to 65 feet. The Lidar Pro also has support for human and vehicle recognition.

Q: 2. Is there way to control active track pro via lidar from the DJi high bright monitor?

A: Yes, DJI Transmission to a High-Bright Monitor supports LiDAR focusing. DJI Master Wheels and other DJI PRO ecosystem products are also supported. You can learn more here: https://www.dji.com/transmission https://store.dji.com/product/dji-transmission-combo?vid=116751

Q: 3. What capacity, if any, will the RS2 focus motor work when combined with RS 3 Pro Gimbal? (Combo = RS 3 Pro Gimbal, Lidar for RS, and RS 2 Focus motor)

A: The DJI Ronin Focus Motor for RS 2 and RSC 2 is not listing capability with the DJI LiDAR Range Finder for RS. If looking to pair the DJI LiDAR Range Finder for RS with the DJI RS 3 Pro Gimbal Stabilizer, consider using the DJI RS Focus Motor (2022).

Q: 4. will this be able to focus with a diopter filter +1 or +2?

A: The minimal focal distance of the DJI LiDAR Range Finder for RS 3 Pro is 0.7m to 1.2m away form the sensor, so as long as the motor is calibrated correctly and the Lidar can see the subject, the DJI LiDAR will be able to pull focus to the subject whether the lens has a diopter mounted to it or not.

Q: 5. Any and all ways to use this? From my conclusion, I'd need the DJI RS3 PRO, the focus wheel assembly, and this LiDAR unit. Is there more to know? Also, I have the Sigma 24-70 F1.8 with continuous focus wheel rotation and no hard stops for my lumix s5, can I use it with this successfully?

A: The DJI LiDAR Range Finder for RS allows for use with non-hard stop focus ring lenses.

Q: 6. Is this compatible with the RS3 Pro Gimbal?

A: The DJI LiDAR Range Finder for RS can be plugged into the RS-3 Pro. However, you cannot have LIDAR focus with remote video and Force Mobile control.

Q: 7. Will the LiDAR work with the Sigma Art Lens 18-35, which is mechanical, but has no hard stops?

A: If you are using the non-cinema Sigma 18-35mm lens, you will need to use the focus gear ring that comes with the focus motor.

Q: 8. Will this also take care of active track without Raveneye?

A: Yes, The DJI LiDAR Range Finder for RS gimbals would also provide motion tracking data to the gimbal. The LiDAR Range Finder (RS), RS 3 Pro supports ActiveTrack Pro, delivering better subject identification and tracking performance.

Q: 9. Will the rangefinder work with the focus motor also when not connected to the gimbal? Eg tripod shots, handheld shots etc on different rigs without gimbal?

A: At this time, DJI has only recommended support for the DJI LiDAR Range Finder for DJI RS stabilizer systems.

Q: 10. Is this compatible with the old focus motor included in the rc2?

A: The DJI LiDAR Range Finder for RS 3 Pro is only compatible with the RS 3 Pro and the Ronin 4D. It is not directly compatible with any focus motors.

Jonathan	22/09/2024
[0.01 lb] Good quality leather and perfectly matches my 1950's green pebbled leather Leica camera bag! 5

Mark	28/08/2024
[0.01 lb] This is an an amazing tool of you have to do solo or low light shoots. No more worrying about whether what you're shooting is in focus. I have used their 3d focus, but this is autofocus for manual lenses, on overdrive. 5

Khoren	23/08/2024
[6 x 2.5 x 1"] i like et 5

Luis	17/07/2024
[6 x 2.5 x 1"] the ability to autofocus without the ronin gimbal is stellar the fact that this makes perfect use of an already amazing product is awesome ! it does its job as expected. the only thing I wish is for stronger motors for DJI but nonetheless it doesn't disappoint 5

Gordon	09/07/2024
[6 x 2.5 x 1"] This is a beautiful strap made with exquisite leather. It instantly enhances the appearance of a vintage camera. I’m 6’1” so my only wish is that the strap came 2-4 inches longer. 5

Bronwin	08/07/2024
[6 x 2.5 x 1"] At first I was a bit causes to get it cause my aim was to go for the Lidar Pro bundle. But since it’s still new, places are out of stock and here in South Africa, we struggle to get tech like this. But B&H, I am more than happy about this product, delivering was on point as expected and professional. My Nisi Lenses can enjoy getting pulled haha. 5

Laurence	07/07/2024
[6 x 2.5 x 1"] For my mirrorless Fujifilm X-E3 (which is quite light) it works fine and looks great. It's very flexible and doesn't take up a ton of room in the bag - maintains the compact nature of the camera, which I like. For a heavy camera, it would be too narrow. But for a light camera, it's great. 5

Samantha	14/06/2024
[6 x 2.5 x 1"] When you want to go more inconspicuous in sunlight and don't want an external monitor with a hood, this little gadget does great. It fits over the built in monitor very securely and you can see the screen so much better! 5

Fame	23/05/2024
[6 x 2.5 x 1"] A needed item if you want to use the LiDAR and High Bright Monitor together with any camera and without the gimbal. 5