For remote focus and zoom control Movcam Dual-Axis Wireless Lens Control Systemprovides wireless or wired control of your lens. Designed as a modular system, it is available as either a single or dual axis system, with the single axis system upgradeable by purchasing additional modules. The system features OLED information screens that are visible both indoors and out, and automatic lens calibration.

The focus controller/transmitter incorporates a slot that accepts NP-F550 and F570 type batteries internally (batteries not included.) Although the system has a wireless range of about 90' indoors and over 650' outdoors, you can connect an included cable to hardwire the focus controller to the motors. The motors are powered via an included D-Tap cable and feature an integrated 15 to 19mm rod clamp. Each motor ships with a replaceable 0.8 MOD cine-style gear. The system can control record stop/stop for select RED, Canon, Sony, Arri, and Blackmagic Design cameras (requires optional cables, not included.)

2 x Lens Drive Motors    OLED Information Screen    Automatic Lens Calibration    Incorporates NP-F-Type Battery Plate    Wireless Range up to 100' Indoors    Wireless Range up to 656' Outdoors    Ships with Cine-Style Drive Gear    For 19 and 15mm Rods    Record Start/Stop with Select Cameras

Dual axis system that allows you to control focus and zoom

The zoom module features a cine-style thumb rocker and a rosette for mounting to a tripod panhandle with matching rosette clamp (rosette clamp not included.)

The marking disc on the handwheel is compatible with dry and wet erase markers, removable, and backlit.

The rod clamps feature spring-loaded locking levers, and can be adjusted along almost the entire length of the motor.

The screen of the wireless transmitter with the focus handwheel displays the following:
Battery Storage
Record/Stby
Lim
Channel selected
Calibration
Menu

The Menu includes: Home Page
Switch Wireless Module Channel
Control Set Up
Motor Setup
Adjust Torque
Stick Speed
Adjust Screen Brightness
Knob Illumination Switch
Language
Restore Factory Defaults
Software Updates
System Data

Related Questions and Answers

Q: 1. Is the power cable compatible with a Sony alpha A7siii?

A: no it is not. you will need to power the unit with a separate power source

Q: 2. How would one attach this to the MōVI M5, and replace the stock handle?

A: You would need to use a 25mm rod clamps that have a 3/8"-16 end.

Q: 3. What would be the best way to power the motors while flying it on a Freefly Movi M5, with a Sony A7 series camera?

A: Use D-tap-Movi Batt adapter. And daisy chain your motors. You might look into the Tilta range extender depending on how far your want to fly (assuming you meant drone)

Q: 4. will it work with 19mm rod?

A: Yes it will. This comes with two 19mm Motor Rod Clamps along with two 15mm Bushings. This works with both 19mm and 15mm rods.

Q: 5. Would this motor and hand grip work on the red Komodo to pull focus? I am wanting to mount a RH grip on a rosette off of a Timmy rail so I can pull focus with both hands on the rig. More of a run n gun type setup. Is this doable? Thx

A: yes this can be mounted on a 15mm rail system on a shoulder mount to pull focus during hand held operation

Q: 6. Does anyone have experience of using the Nucleus-M with the Canon RF 100mm macro? I work in the 1:2 to 1.4:1 range.

A: The Tilta Nucleus-M Wireless Lens Control System Partial Kit I is a great option for the Canon RF 100mm f/2.8 L Macro IS USM Lens as the Tilta Nucleus-M FIZ Hand Unit is capable of adjusting the torque on the motor for precise focus control.

Q: 7. I purchased the nitecore NL1835 3500mAh 18650 12.6wh and I can not get them to fit into any of the battery ports. Do I have the wrong size?

A: You may have the wrong batteries. We currently recommend the EVO Gimbals IMR 18650 - 3 Battery Pack for Rage3, B&H # EVO50645, for this product. They are the proper size. https://bhpho.to/2MEzf2g

Q: 8. will the handles mount on a ronin m?

A: Yes they will. This kit comes with two Handle to Gimbal Bar Adapters that work with bars between 25 to 30mm. The Ronin-M has a 25mm top bar.

Q: 9. how can i rig this to freeworld monitor?

A: I recommend using the Nucleus-M FIZ Hand Unit Monitor Bracket to mount the Nucleus-M Hand Unit to the monitor.

Q: 10. Is there a way to have the unit loop automatically back and forth between two points without having to manually turn the knob, and also be able to set the speed?

A: No this can NOT be set to auto loop focus points