The Ghost-Eye Wireless HDMI/SDI Video Transmitter 400M from Cinegears transmits a high fidelity, uncompressed HD video transmission signal up to a line-of-sight distance of 1312 ft. It allows you to shoot indoors and outdoors, as well as during night and day. With both 3G-SDI and HDMI inputs and outputs, and four workable simultaneous frequencies between 5.1 to 5.9 GHz, you can utilize the video transmission for professional applications. It requires the Ghost-Eye Wireless Video Receiver 400M at the receiving end.

Transmit up to 1312' Line-of-Sight    1 x Transmitter & 1 x Receiver    Supports up to 1080p60 HD Video    Uncompressed 10-Bit, 4:4:4 Video    Under 30 ms of Latency    HDMI & SD/HD/3G-SDI Input & Output    Use up to 4 Receivers with 1 Transmitter    Cross-Compatibility with 100M/150M/300M    HDMI to SDI Cross Conversion

Uses 5 GHz ISM frequency band with a maximum of ten frequency channel selection by user knob, coexisting with Wi-Fi

Supports wireless 10 bit HD video without compression or delay up to 1312'

High-quality picture with very low latency (<30 ms)

Supports point-to-point and point-to-multipoint network topology

Supports up to four receivers

Compatible with Cinegears Ghost-Eye 100M, 150M, and 300M receivers

SDI/HDMI inputs from digital cinema cameras, HD-SDI video cameras, and other digital devices

Highest resolution 10-bit color depth 4:4:4

HDMI and 3G/HD/SDI 1080p60 fps input and output

HDMI to SDI cross conversion is supported

Supports professional audio formats including Dolby True HD, DTS-master, and more

AES-128/256 encryption with air interface HD video data stream

HDMI 1.4 with EDID supported

Timecode and tally supported for broadcast or live event streaming production

Prevents heat and moisture damage

Wide range power voltage input, adapts to camera batteries

Input and output ports with ±8 kV ESD protection level (HBM, contact discharge)

Plug and play feature allows instant connection, without software

Firmware upgradable via Mini USB port

Professional standard two-pin LEMO power plugs

Built-in LCD screen displays device and signal status

Water and mist-proof, shockproof production case with form insert, ready for traveling

CE, FCC, RoHS certified product, safe to use worldwide

Related Questions and Answers

Q: 1. Do you need the encrypted version in order to be sending timecode?

A: Yes, the encrypted version is required for sending timecode.

Q: 2. How does the transmitter mount to a camera? We own the Ghost-Eye 600M and it has a 1/4"/20 screw terminals, this has none shown.

A: The most common way the CINEGEARS Ghost-Eye Wireless HDMI & SDI Video Transmitter 1000 and other wireless TX is mounted to a camera is on a cage for the camera and with an articulating arm.

Q: 3. This unit is compatible with cameras blackmagic 2.5k, 4K, Ursa, Ursa mini, Sony FS7, FS5, FS700, EX3, and all RED ???Do you have any feedback on the reliability of this product?

A: Since this unit has both SDI and HDMI inputs and can read all common FPS rates, we are of the opinion that this should work with all of the cameras you mentioned. No feedback here yet as to reliability.

Q: 4. Is this compatible with Sony batteries?

A: The transmitter uses Sony L-series batteries and the receiver uses V-mount batteries.

Q: 5. Can the receive receive multiple signals at once?

A: No it can not.

Q: 6. Can I use more than one kit at the same time? Planning to have 4 cameras transmitting at the same time.

A: You will be able to use up to four systems simultaneously. Please keep in mind that this systems operates off of a license free 5.1 to 5.9 GHz frequency band. Depending on your location it may be difficult to find 4 open channels to use, this would be true of pretty much any wireless transmission system though.

Q: 7. Is this kit working smoothly and well by sending the signal from the hdmi out port of the atomos ninja flame ? (I know for example that paralinx have some compatibilities problems) Thanks!

A: We have not heard of configuration problems such as you mentioned. That is not to say they do not exist but that we have not heard of them. We can say we see no glaring reasons why this would not work as you wish.

Q: 8. How long does it take to connect the transmitter to the receiver? Thanks!

A: Once the transmitter and receiver are set up and powered, pairing the two is supposed to be instantaneous.

Q: 9. Will this work in a heavily saturated area of wireless signals (internet, audio, video)? I am trying to use it in a college basketball arena in a game day atmosphere and have fallen short with other products due to interference.

A: The Cinegears Ghost-Eye 150m has a 492' range and works over a frequency band that runs from 5.1 to 5.9 GHz. You should be able to find a channel that will work for you. However this product runs on a public, license free frequency band. The only way to see if it will work in a particular area is to actually test it out and adjust the settings. This is a returnable item if it does not work for you.

Q: 10. Is the power/strength level of the transmitter customizable, or is it always going to consume maximum power from batteries?

A: It does not have power/strength settings.