Cinegears 2-Pin Lemo To D-Tap Cable For 150M Ghost-Eye

Cinegears 2-pin Lemo To D-tap Cable For 150m Ghost-eye

Product Code: eq179959
Availability: In Stock

$147.00 $230.79

Qty

10 reviews Write a review

Description
Reviews (10)

The 2-Pin LEMO to D-Tap Power Cable from Cinegears enables you to power a 150M Ghost-Eye Wireless Transmitter or Receiver unit from D-Tap power sources like a pro Gold or V-mount battery or a splitter plate.

For 150M Ghost Eye 2-Pin LEMO to D-Tap Power 30" Cable

Parameters
Connector 1	2-pin LEMO
Connector 2	D-Tap
Length	30" / 75 cm
Weight	1.3 oz / 38 g
Packaging Info
Package Weight	0.095 lb
Box Dimensions (LxWxH)	8.35 x 5.65 x 0.65"

150M Ghost-Eye Wireless transmitter or receiver

Related Questions and Answers

Q: 1. How many 150M V2 can be used simultaneously at the same location on different channels? any setup limitations?

A: It may be possible to have up to 4 of these systems working at the same time. However it is important to keep in mind that these units operate over a public frequency band. So how many you'll be able to use will really depend on how free the frequencies are in the area you are broadcasting. We would advise you to only try and use one or two at a time.

Q: 2. Is the frequency tunable? Can I select a specific frequency in the 5GHz range?

A: You cannot select a specific frequency. You can pick from the 10 preset frequencies I don't know exactly what the frequencies are but they are probably not in the 5Ghz range.

Q: 3. Does this support PAL videos?

A: Yes it does. This system supports both PAL and NTSC signals.

Q: 4. what type of battery it uses?

A: This system uses Sony NP-F style batteries like the NP-F770. https://bhpho.to/2bRUc5Z

Q: 5. Are both units silent? Fan or no fan?

A: They are silent for there are no fans.

Q: 6. Will this work on a Sony a7s2 (hdmi signal) transmitting to a SDI only monitor? will it convert the signal on its own?

A: The Cinegears Ghost-Eye supports HDMI to SDI cross conversion. You will be able to put an HDMI signal in to the transmitter and connect the receiver to an SDI monitor.

Q: 7. latency?

A: The Ghost-Eye 150M V2 is under 1 ms of Latency.

Q: 8. Can Video Transmission Kit 150M V2 supports Version 1 Receivers on Each Channel signal receive?

A: Yes it should. According to Cinegears this is compatible with any Ghost Eye receiver, including the first version.

Q: 9. Description says Timecode and Tally are supported. Manufacturer says they are not. Please verify...?

A: I have the Ghost-Eye 150m and I have tested it for timecode. I can confirm that TC is supported. I don't know about tally.

Q: 10. What type of cameras and video switchers can this device worked with?

A: It can work with any camera or device as long as they have an hdmi or sdi port

Jacob Yuri	04/09/2024
[0.095 lb] Outstanding. I have owned several other HDMI transmitters (high end ones) and this beast is the best I have had by far. Full HD resolution, super quick delay and very long transmission range. 5

Ryan	27/08/2024
[0.095 lb] This product worked really well. Used it for a Track and Field event and was able to cover the entire stadium. One heads-up is that for it to work really well, we learnt it had to be mounted very high up to cover the Olympic-size track. 5

Philip	22/08/2024
[D-Tap] Use only for one event so far so Good, very clear image...... Love it ... if any one looking for Wireless HDMI & SDI Video Transmission I would recommend to Ghost-Eye 150m. But this is little bit expensive 5

Kelly	16/08/2024
[30" / 75 cm] I've used many different wireless systems, from ultra-cheap Amazon garbage to top-of-the-line studio systems. Ghost-Eye is hands down the best bang for the buck-- I would take these over Paralinx, over Teradek, any day-- It turns on and works, you wouldn't think that would be so hard, and for Ghost-Eye, it's not. I'm going to buy 2 more of these. It makes my life easier and it saves me time. 10 stars-- 5

Max	12/08/2024
[30" / 75 cm] I bought one a few months back, and use it all the time. Works great, with very infrequent dropouts or reconnects. Receiver can output HDMI and SDI simultaneously, which has come in handy. The only criticism I have is that it doesn't have SDI loop-through on the receiver end. Solved pretty easily with a T-connector, but it would be nice to have. 5

Sarah	07/08/2024
[D-Tap] We Love Ghost-Eye!! And our clients do too! Just got a text from our customer on set, he is a sound audio mixer and has 2 feeds from video village to his sound cart (A & B Cam). He said “I will never do another show without the Ghost Eye!!” We have been using the 150M kits for over a year and have had excellent results on TV shows and movie sets. CineGears support has always been fast and easy to work with if you have questions. We just ordered 2 new Ghost-Eye300M kits from B&H and are excited to get them in the field. Why you ask?? Because our 150M kits are out working and we need more kits for a job! Thanks B&H and CineGears!! 5

Shuai	01/07/2024
[2-pin LEMO] This wireless video transmission system is solid. It works well with obstacles in between. The best part is it's very compact. And it supports both SDI &HDMI . We have done numerous test and the system is able to hold up to 300M in range. Definitely recommend. 5

Alberto	12/06/2024
[1.3 oz / 38 g] For the price it is a great solution, no lag at all 5

richard	27/04/2024
[1.3 oz / 38 g] Works like a top. Would love if the the transmitter has an sdi pass thru. But I knew that going in. Other wise b happy. 5