Movcam Mrs-1 Receiver For Wireless Lens Control

Product Code: eq179971
Availability: In Stock

$3,102.00 $4,528.92

Qty

19 reviews Write a review

Description
Reviews (19)

Movcam MRS-1 Receiver for Wireless Lens Controlis a single-axis wireless receiver that coupled with the Movcam SCU-1 or MCS Handset and a compatible motor allows you to control the focus, iris, or zoom rings of your lens. The receiver includes a 15mm rod adapter, and it features a mounted quick release mechanism that allows you to mount and dismount the receiver quickly yet securely. The receiver can operate Movcam lens motors as well as a variety of 3rd party motors.

Adding two additional MRS-1 receiver modules allows you to control focus, zoom, and iris with additional motors and controllers. Please note additional controllers, motors, and receiver-to-motor cables are required for multiple lens function control; however, they are not included. The module has an OLED screen that displays information and is readable in exterior settings. The system as a whole has a transmission delay of less than 12ms and a wireless range of about 100 feet indoors and 650 feet outdoors.

Single Axis Receiver For Focus, Zoom, or Iris Control Mounts on 15mm Support Rod Supports Movcam and 3rd Party Motors Expandable with Optional MRS-1 Modules OLED Info Screen Readable in Sunlight Transmission Delay <12ms Wireless Range 98.4' Indoors Wireless Range 656.2' Outdoors

Parameters
Frequency	ISM2.4M
Dimensions	3.1 x 3.27 x 1.16" / 79 x 83 x 29.5 mm
Weight	Approx. 0.4 lb / 175 g

FCC-approved wireless module with ISM 2.4M frequency range

Transmission Delay: less than 12ms

On-board .48" OLED screen, visible in sunlight

Indoor transmission distance: 98.4'

Outdoor transmission distance: 656.2'

Receives a signal from SCU-1 Handset or MCS Handset to control lenses

Works with existing Movcam motors and other 3rd party systems. Please check with Movcam for updated compatibility

Related Questions and Answers

Q: 1. Does this work with the RS3 pro gimbal?

A: Yes, the Tilta Wireless Control Receiver Module B&H # TIGARCR would also support the DJI RS3 Pro Gimbal.

Q: 2. will this work with the FS100 and attached to a rossette on my front rods? Also is the an Arri or non-Arri rossette?

A: Yes it will function with the FS100 using the included LANC cable. It will not mount onto the the rosette found on the camera body as SONY uses 1/4-20 center threading on their rosette. The Movcam rosette is ARRI compatible.

Q: 3. Is this compatible with the ZCam E2C?

A: The ZCam E2C does have a 2.5 mm LANC Control connection. This should work with that camera.

Q: 4. is this compatible with my Metz 52-AF-1?

A: This is not compatible with your Metz.

Q: 5. Can I remotely turn on the rs2 with this? I am trying to hang the gimbal and it will be out of reach. Will this allow me to remotely power on the gimbal?

A: No, the Tilta Wireless Control Receiver Module for RS 2 will not allow you to remotely power the DJI RS 2 on or off.

Q: 6. is this an arri 31.8mm rosette or 28mm?

A: This is standard Arri Rosette or 31.8mm.

Q: 7. is this work with GODOX V1s?

A: No.

Q: 8. Will this work with the Godox XProN?

A: Yes, you can use the Godox XProN with the Godox XTR16 Wireless Power-Control Flash Trigger Receiver, but you will not have TTL or HSS.

Q: 9. Can the Nucleus Nano II FIZ controller connect to this device to control a dji focus motor?

A: No, the Tilta Wireless/Wired Control Receiver Module for RS 2 is designed to be used with the Tilta Remote Control Handle for Advanced Ring Grip for RS 2 and RS 3 Pro.

Q: 10. is it compatible with bmcc?

A: Yes the grip is compatible with LANC protocol cameras including the Blackmagic.

Stu	07/09/2024
[ISM2.4M] This piece was actually missing in a strobe kit I ordered and after notifying customer service they were super helpful and quick to make sure they sent me a replacement ASAP. Easy to use and gets the job done for the older Godox systems that don't have built-in wireless connectivity. 5

Chris	25/08/2024
[ISM2.4M] Worth it for a light weight set up. Makes mounting on a gimbal, handheld or steadicam easy and compact. Mounting point can't be rotated 360 degrees making it versatile for what ever camera you are using. 5

Brian	17/08/2024
[ISM2.4M] Worked great and paired quickly to my Tilta Advanced Ring Grip handle. My last one broke due to user error. I am glad this one was in stock! 5

Steve	16/08/2024
[ISM2.4M] Its amazing that these inexpensive little gadgets give me the ability to control my lighting from behind my camera. That was something I always considered a luxury. 5

Oliver	13/08/2024
[ISM2.4M] It holds 6-7 cards plus 4-5 notes. Easy to access any card you need while keeping the overall thickness very low. Like the design. 5

Jason	28/07/2024
[ISM2.4M] This cage fits the A7S perfectly, makes it feel so secure and ready for any task thrown at it. Also, an unexpected plus is that it added the perfect amount of weight for my glidecam hd-4000. 5

Daniel	27/07/2024
[ISM2.4M] Simply put, you can not get a better cage for the A7s. I'm currently running a Zoom H6, NTG-2, and Sennheiser 112p-G3 all mounted on top of the cage, and it works beautifully. If you own an A7s, do yourself a favor and buy this cage now. 5

Robert	24/07/2024
[ISM2.4M] I usually get the Leather Cover Wedding album but this one was a good replacement. 5

il dottore	07/07/2024
[ISM2.4M] This is exactly what I needed to complete my BMCC-ENG rig, which is built on the Tilta BS-T03. To complete the package I really needed a handle that I could attach to rig on the front right side 15mm rod, that was placed it close to the lens axis and near my body, as this would allow me to both hold the camera steady with my right arm whist have my upper arm in a position against my chest to make it comfortable to hold the rig for extended periods. My left hand is then completely free to operate focus, zoom and aperture rings on my lenses (note that I'm not using ENG lenses with this rig). This set up works perfectly, and it is very compact. But more importantly, it is a properly balanced system when sitting on the shoulder - unlike many BMCC rigs available which feature the two outboard front-facing handles with the shoulder pad attached to the rear rods making them way too front heavy and difficult to hold for extended periods. I'm also using a LanParte LANC Controller for Blackmagic cameras (B&H # LANC01) on the handle to control the camera recording function. The Tilta BS-T03 quick-release baseplate allows me to attach/detach the camera rig quickly from my heavy-duty tripod via the use of a VCT-U14 tripod plate adapter on the tripod head. I can't recommend this setup highly enough. This beats the other style rigs hands down, ... literally as well as figuratively. 5

Udano	02/07/2024
[ISM2.4M] I used this for the Sony A7s. It fits the camera super well. At first I thought the cage is too tight, but I came to appreciate its compactness. I have its based attached to my camera permanently. The other sides can be removed or attached on if you need them. The whole case came off in 5 parts so configure them any ways you want. The only thing I think it clumsy is the part that secure the micro HDMI to the A7s body. It is too tight and easy to fall off. 5