The E-Image Carbon Fiber Tripod GH15 Head Dolly Kit 100mmsupports cameras and accessories weighing up to 39.6 lb. The head and legs feature a 100mm ball/bowl, which provides a wide support platform. The legs are made from carbon fiber so they are lightweight and corrosion resistant, and they feature three leg sections with mono-lock leg locks. The mono-lock design allows you to lock and unlock all the sections of each leg using only one rotating locking lever. The tripod legs support up to 133 lb of load and are adjustable from 32.5 to 68.5". The legs feature spiked feet and come with a ground level and a mid-level spreader, as well as rubber feet to cover the spiked feet.

The GH15 head features a sliding balance plate system for attaching the camera to the head. It provides 10 counterbalance settings (zero to seven) that help the fluid head support loads up to 39.6 lb. With five fluid drag grades plus a zero setting on both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. The head features a built-in 1/4"-20 accessory socket for available monitor support arms or other accessory items. It includes a padded carry bag with shoulder strap.

GC102 Two-Stage Carbon Fiber Tripod Legs    GH15 Fluid Head, 39.6 lb Payload    Lightweight Collapsible Tripod Dolly    18 to 63" Tripod Legs' Height Range    Mono-Lock Leg Locks    Stepped Drag and Counterbalance    Separate Pan and Tilt Locks    Mid- and Ground-Level Spreaders Included    Pan Handle    Padded Carry Bag with Shoulder Strap

Mono-lock design allows you to lock and unlock the three sections of each leg using only one locking lever. The rotating lever provides a robust clamp mechanism that secures the legs and prevents them from slipping once locked. The single lever on each leg allows you to quickly lock the leg height without having to use two levers, making for a quicker workflow and sparing you from bending down to open the bottom leg lock to raise the legs fully.

The legs feature spiked feet that provide solid purchase on soft surfaces when not using the included ground level spreader.

The ground level spreader attaches to the spiked feet for working on delicate or hard surfaces.

The included mid-level spreader allows you to work on uneven terrain, such as stairs or rocks, while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod's foot spikes.

The head features a tilt range of - 60 to 90°, which allows you to tilt the camera so it points from almost straight down to straight up.

The 100mm bowl/base provides a wide platform for balancing and working with cameras and accessories up to 39.6 lb.

The bubble level illuminates at the touch of a button.

Related Questions and Answers

Q: 1. Does the tripod head have a leveling bowl type adjustment?

A: Yes, There is a knob on the bottom of the head that can be loosened and allows you to level the camera without changing the height of the legs.

Q: 2. Is it possible to buy replacement heads or a head that is compatible with the mount of the tripod legs? My head is super stiff when panning left to right.

A: The head is removable so yes, you could replace it with another of your choice.

Q: 3. Does this include Quick-Release Adapter with plate?

A: Hello,a quick-release system is built into the head of this tripod kit. The kit includes a quick release plate, and you can buy an extra under the SKU GP1 if you want to prep for quick-swapping or are unfortunate enough to lose plates easily.

Q: 4. Monopod mode can be used as extension for gimbal?

A: Yes, if a end-user really need the extra height it could be used with a gimbal but we would suggest to use with out ball head and a bushing is needed in order to do so. Oben 3/8"-16 to 1/4"-20 Reducer Bushing BH #OB1039 • MFR #OB-1039 https://bhpho.to/43QIPGe https://bhpho.to/43QIPGe https://bhpho.to/43QIPGe

Q: 5. It is written that it comes with mid-spreader with rubber foot, but I don't see it in the picture. Could you confirm it?

A: The mid-level spreader, ground-level spreader and rubber feet are all included with the E-Image Two-Stage Carbon Fiber Tripod.

Q: 6. Hi, can I take the tripod head off and mount a varizoom solo jib in it? Would it hold?

A: This tripod has a load capacity of 17.6 pounds, while a Varizoom Solo Jib that is Carbon Fiber will weigh right around 7 pounds. If you keep the weight of the camera you are putting on it low this tripod will be able to handle the Varizoom Jib. The jib will also connect right to the tripod head, you would not need to remove it.

Q: 7. Does this tripod come with a bag with a shoulder strap?

A: Yes! Is a really good product 100% recomendable

Q: 8. Does this work with jvc 850u??

A: Yes it will. This tripod has a 22 pound load capacity, which is more than enough for B&H # JVGYHM850C14. You will just want to add B&H # JVKA551U, which is the JVC KA551U Tripod Adapter Plate.https://bhpho.to/2wPAlP9

Q: 9. can you remove the head and put on a short glide?

A: The short answer is yes.You will need an adapter. I suggest either one of the attached adapters seen below.The Manfrotto has a low profile and is very solid. However, there is no leveling possible, for it holds the head in just one position. The ikan adapter is more expensive, rests the head and camera about 2 higher. However you can level with it.

Q: 10. Hi, what is the minimum camera weight for this tripod? Would it work with a small DSLR camera as well as the heavier camera options?

A: The manufacturer has not published a minimum weight capacity and in a pinch, you can probably mount a DSLR on this without issue, but the head is designed for heavier cameras, which is when its counterbalance prowess and overall performance shine.