Designed for large venues, the 120V Da-Lite 29222 Wireline Advantage Motorized Projection Screen 108x192uses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

220" Diagonal / 16:9 Aspect Ratio    HD Progressive 0.9 Surface    0.9 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Related Questions and Answers

Q: 1. Is there a external rechargeable power unit for remote locations?

A: It doesn't, so I purchased a Goal Zero YETI portable battery power source. I actually have 2 of them, the 150 and the 400 (for extended use). They both work well and give the Gimbal plenty of power.

Q: 2. Will this be compatible with canon powershot sx740hs and/or Fujifilm X-E3 with a small prime?

A: This gimbal has a payload of 2lb. A Canon Powershot camera should work well on this gimbal however a Fujifilm X-E3 is pushing it to the limit. Depending on the lens that you intend to use it is very easy to reach or overshoot the 2lb limitation. Not to mention that the X-E3 is physically larger than most point and shoot cameras which will make it more challenging to balance on this gimbal as it is designed with smaller cameras in mind.

Q: 3. Is this gimbal compatible with the Canon PowerShot SX60 HS or the Canon PowerShot SX70 HS?

A: Yes this will work with the canon power-shot cameras

Q: 4. Is this works with Canon EOS M50?

A: It will work, but no other attachments or accessories should be used. The gimbal's weight capacity is at a 2 lb. max.

Q: 5. Will this work with a Panasonic Lumix ZS 100?

A: Yes it will. The Moza Mini P is capable of stabilizing the Panasonic Lumix ZS 100.

Q: 6. Will this work with the Leica Q camera?

A: Yes it will.

Q: 7. Can we do programmable moves?

A: We're afraid not. This is not a programmable head.

Q: 8. Will a GoPro Hero 8 balance well on this gimbal?

A: Yes, a GoPro Hero 8 should work well on the Moza Mini-P.

Q: 9. Will this work with the Go Pro Hero 10?

A: Although there is no control listed with the GoPro Hero 10, a GoPro Hero 10 can be mounted to the camera carriage of the Moza Mini P gimbal with a tripod adapter. Example is Revo Tripod Adapter with 1/4"-20 for GoPro B&H # RETPMGP MFR # AC-TM. https://bhpho.to/3mTWMyF

Q: 10. Is it possible to mount two cameras with the right connectors? One camera being on top and having a zoom lens on it, and then a smaller DSLR with a small zoom lens? Cameras are the Canon 80D on the Sigma 150-600mm C (camera on top), and a Canon T3 with a the 75-300 kit zoom lens. The combined weight is under 11lbs.

A: It can be possible since the payload of the Canon EOS 80D DSLR Camera (Body Only) with Sigma 150-600mm f/5-6.3 DG OS HSM Contemporary Lens for Canon EF and the Canon EOS Rebel T3 DSLR Camera with the Canon EF 75-300mm f/4-5.6 III Lens are within the payload of the Vidpro Motorized Pan & Tilt Gimbal Head. You will need to consider balancing both cameras and their zooms appropriately from one another so the gimbal can function well.