Designed for large venues, the 120V Da-Lite 29229 Wireline Advantage Motorized Projection Screenuses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

164" Diagonal / 16:10 Aspect Ratio    HD Progressive 0.6 Surface    0.6 Gain / 170° Viewing Angle    Suspended from Cable up to 29'    Slim-Tab, Low-Profile Tab-Tensioning    Hand-Held Remote Included    Built-In Radio-Frequency Motor    Seamless, Black-Backed Screen Surface

Ideal for high output projectors or applications where projector brightness and screen size require low gain, the gray surface compensates for a brightly lit environment so that image contrast is preserved. In low ambient light, HD Progressive 0.6 provides deep contrast and is typically used with video. Cone: 170° Gain: 0.6

• Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum-rated case
• Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
• Black-backed screen material for enhanced image quality and opacity
• Seamless screen surface

Related Questions and Answers

Q: 1. Can this unit be adapter to a wireless controller or is there a next step up that would not brak the bank?

A: I would think that it would take quite a bit of work to make it work wirelessly. There are 2 cables that it uses. One for the pan motor & the other for the tilt motor. They send a varying voltage to the motors to control the speed they move the cameras.

Q: 2. Will this work with a Panasonic Lumix ZS 100?

A: Yes it will. The Moza Mini P is capable of stabilizing the Panasonic Lumix ZS 100.

Q: 3. Will this work with an iPhone mounted in a portrait mode?

A: No, the mount is designed for landscape mode.

Q: 4. Will this work with a Panasonic Lumix DMC-G7?

A: no it will not work with the G7 the Lumix G7 is over the weight limit for the gimbal.

Q: 5. Is there a way to add counterweights if needed? I'm using an iPhone 12 Pro Max with Moment lenses plus ND filters.

A: It does not have a designated mount for counterweights. most counterweights for small electronic gimbals like these come with clamps or other mounting gear for attaching the counterweight to the gimbal.

Q: 6. Can this be mounted on a Church wall and can it be operated more than 20ft away with extended cable?

A: That should be possible. Varizoom has both 50 and 100 foot extensions cables that are compatible with this system. 50 Feet: https://bhpho.to/2Jc1iDl 100 Feet: https://bhpho.to/2vFSbHT

Q: 7. Is this works with Canon EOS M50?

A: It will work, but no other attachments or accessories should be used. The gimbal's weight capacity is at a 2 lb. max.

Q: 8. Is it possible to mount two cameras with the right connectors? One camera being on top and having a zoom lens on it, and then a smaller DSLR with a small zoom lens? Cameras are the Canon 80D on the Sigma 150-600mm C (camera on top), and a Canon T3 with a the 75-300 kit zoom lens. The combined weight is under 11lbs.

A: It can be possible since the payload of the Canon EOS 80D DSLR Camera (Body Only) with Sigma 150-600mm f/5-6.3 DG OS HSM Contemporary Lens for Canon EF and the Canon EOS Rebel T3 DSLR Camera with the Canon EF 75-300mm f/4-5.6 III Lens are within the payload of the Vidpro Motorized Pan & Tilt Gimbal Head. You will need to consider balancing both cameras and their zooms appropriately from one another so the gimbal can function well.

Q: 9. Can this be mounted upside down on a jib?

A: We have attempted to contact Vidpro regarding your question and have not received word yet. it is our opinion that it should work upside down since remote heads often are needed to work in such a configuration. We will post as soon as we receive a response.

Q: 10. Will this work with the Sony ZV-E10?

A: Yes, the Moza Mini-P Gimbal will work with the Sony ZV-E10.