Kanto F3760 Wall Mount For 37-60" Displays

Product Code: eq180097
Availability: In Stock

$179.97 $257.36

Qty

12 reviews Write a review

Description
Reviews (12)

The Kanto F3760 Wall Mount for 37-60" Displaysis designed to mount flat-panel displays measuring 37 to 60" and has a maximum load capacity of 150 lb. It provides post-installation horizontal leveling and includes mounting hardware for wood studs and concrete.

Supports 37 to 60" Displays 150 lb Weight Capacity 100 x 100 to 600 x 400mm VESA Patterns Post-Installation Horizontal Leveling

Parameters
Compatible Models	Displays 37 to 60"
Mounting-Hole Pattern	100 x 100 mm 120 x 180 mm 200 x 100 mm 200 x 200 mm 300 x 200 mm 300 x 300 mm 400 x 200 mm 400 x 300 mm 400 x 400 mm 600 x 200 mm 600 x 400 mm
Load Capacity	150 lb / 68.2 kg
Orientation	Landscape
Distance from Mounting Surface	1.0" / 2.5 cm
Dimensions	28.9 x 17.7" / 73.2 x 45 cm
Packaging Info
Package Weight	7.35 lb
Box Dimensions (LxWxH)	28.6 x 9 x 1.7"

Dual-stud wall plate accommodates up to 24" stud spacing

Steel construction with powder-coated finish

Includes mounting hardware for wood stud and concrete installations

Related Questions and Answers

Q: 1. Can this be used with ad100 pro

A: No, the Nanlite Forza 60 Bowens Mount Adapter is not compatible with the Godox AD100 pro.

Q: 2. The Gopro MAX needs a stick that is less wide than its body at the mount, or else it becomes visible in the 360 shots. I can't tell whether this would work or not. Is the top of the stick more narrow than the body of the MAX all the way around?

A: The Revo Adjustable Selfie-Stick is compatible with the GoPro MAX 360 due to the 0.8" diameter of the stick.

Q: 3. What is the weight load of this adapter?

A: The following unit has a 12 lbs payload.

Q: 4. can you use the battery grip with this mount adaptor?

A: Yes, but you'll have to swing it backwards on the half yoke mount to be sure it's not in the way.

Q: 5. Can this fit the old Neewer C300s to allow use of bowen based modifiers?

A: No, following bracket is designed and made for the Nanlite Forza 60 Bowens mount adapter only.

Q: 6. What's the difference between this and the Nissin i60 in term of features?

A: These flashes are very similar, except the Nissin flash head rotates 360 deg opposed to the Fuji which is only 180 deg. The Nissin flash has a video light and has the ability to attach an external battery pack.

Q: 7. will the Aputure light doom II fits in this adapter?

A: We have not tested it but it should. The adapter is designed to fit a standard bowens mount accessory and light shaper.

Q: 8. Can this flash unit trigger another remote flash?

A: No, according to Fuji's website, the flash is a receiver only.

Q: 9. Can the half-yoke holder be taken off from the Zorza 60 when using this?

A: You could remove the half yoke from the Forza 60 when utilizing this adapter.

Q: 10. What is the diameter of the Nazlite bezel that fits into the non-Bowen side?

A: The Forza 60 has a proprietary sized mount.

Anne	24/09/2024
[Landscape] It's an attractive, strong wall mount and it's working great. But the instructions could use more actual WORDS, not just pics. Same with the manufacturer video -- it's silent! ALSO, I measured very carefully to center it on the wall, but... when the mount is folded all the way flat, the end that holds the TV does NOT line up with the wall bracket. So my TV is a few inches off from where I wanted it. You are warned: measure accordingly. 5

Todd	19/09/2024
[7.35 lb] My tv is installed in a recessed space. With the new tv, I needed to install a full motion mount since the tv edge overhangs the recessed space. There was really only one stud to mount against so the Kanye PS400 worked great. I was able to level both the stand and the tv with the setup. Package includes all the bolts you might need. Only concern is the lower stand mount is a elongated hole to allow leveling but also allows the stand to tilt if too much torque is applied to the stand. However, I have the bolt tight enough enough to hail and not damage the stud. 5

Louis	14/09/2024
[28.6 x 9 x 1.7"] Great product at great price. Combined with excellent B&H service makes it a winner! 5

Russell	11/09/2024
[Landscape] Unless you have some kind of very custom installation, this is a very easy and adequate articulating arm. It's inexpensive and NOT cheaply built. 5

William	04/09/2024
[Landscape] The bracket was easy to install and can handle a wide range of sizes.It telescopes and swivels for the room it's in make it a perfect solution! 5

Ryan	07/08/2024
[Landscape] This was exactly what we needed due to our uncentered stud spacing. It was the only mount we could find that would work. B&H had it in stock for the best price. 5

Michael	03/08/2024
[Landscape] I purchased this wall mount based on a recommendation from a B&H representative when I shared the model TV I was purchasing from B&H and how I wanted to position the TV. The wall mount arrived quickly at my residence, and when I picked up the box, I was surprised by the heaviness. This was a serious wall mount. Not having installed a TV wall mount before, I found the installation fairly straightforward. The installation instructions generally relied on graphics with minimal accompanying text. If I would ding anything, it would be the directions, which I felt could have had more detail. Once installed, the mount worked well and it handled my 77 TV with no issues. This wall mount is not the cheapest on the market, but it is worth every penny because of the quality materials. Highly recommend. 5

Kiare	27/07/2024
[7.35 lb] It's good, it mounted my 50 inch tv 5

Geoffrey	22/07/2024
[Landscape] This was the third bracket I got trying to center my 82 Samsung TV. Finally this solves my issue with tons of wiggle room. Super product. 5

Lester	23/06/2024
[7.35 lb] Excellent compact and multi functional wall mount. Even has cover to hide some of the metal brackets. Well built and easy to mount on wall and put T.V. on mount. 5