Kanto T3760 Tilting Wall Mount For 37-60" Displays

Product Code: eq180098
Availability: In Stock

$179.97 $244.76

Qty

18 reviews Write a review

Description
Reviews (18)

The Kanto T3760 Tilting Wall Mount for 37-60" Displaysis designed to mount flat-panel displays measuring 37 to 60" and has a maximum load capacity of 150 lb. The mount is compatible with displays that have a 100 x 100 to 600 x 400mm mounting pattern. It will keep your TV as close as 1.9" to the wall and it provides -5 to 10° tilt.

Supports 37 to 60" Displays Up to 150 lb 100 x 100 to 600 x 400mm Mount Pattern Provides -5 to 10° Tilt Adjustment

Parameters
Compatible Models	Displays 37 to 60"
Mounting-Hole Pattern	100 x 100 to 600 x 400 mm
Load Capacity	150 lb / 68.2 kg
Adjustments	Tilt: -5 to 10°
Orientation	Landscape
Distance from Mounting Surface	1.9" / 4.8 cm
Material of Construction	Steel
Dimensions	27" / 68.5 cm (Wall Plate)
Weight	7.5 lb / 3.4 kg
Packaging Info
Package Weight	8.9 lb
Box Dimensions (LxWxH)	28.9 x 9 x 2.8"

The spring-loaded locks click into place as you swing the bottom of your TV to the wall. Always within reach, the quick release cords extend below the mount and offer a quick and easy way to detach your TV from the mount and remove it from the wall. This makes it easy to install or remove cables at the back of your TV.

The T3760 is designed with two rows of mounting slots for extra strength and uses four lag bolts to support heavier TVs up to 150 lb. It provides some offset abilities depending on your TV size, allowing you to position your TV anywhere along the wall plate. Made of steel, the 27" wall plate mounts on 16" and 24" stud spacing.

Combine style and function with the polished end caps that cover the ends of your mount and provide a clean, modern look.

Using the included tilt lock screws, you can lock your TV at fixed intervals of 5°, 0°, and -5°. This added feature makes it easy to guarantee the selected position.

With 10° of forward tilt and 5° of backward tilt, the T3760 is designed to provide just the right amount of range to make the proper adjustments to optimize your viewing angle.

Related Questions and Answers

Q: 1. Do I need To use this adapter for the lantern-LT120?

A: If you intend to use the Nanlite Lantern Softbox LT-120 on the Nanlite Forza 60, then this Nanlite Forza 60 Bowens Mount Adapter is required.

Q: 2. Is this compatible with the Fuji xf 70-300 zoom lens? I just bought a Godox 860IIIF that works with other lenses, but not the 70-300. I am looking for a replacement flash.

A: Flash is fine, no need to return or exchange what we suggest in order to amplify the out put is a better beamer. Please review the following item Visual Echoes FX1 Better Beamer Flash Extender for Use with Telephoto Lenses - for Select Mid-Size Flashes BH #VIFX1 • MFR #FX1 https://bhpho.to/3w3WusV

Q: 3. Would this work with the weight and locating pins for a Smallhd 702 touch?

A: The Wooden Camera Tilting Monitor Hinge Kit (3/8"-16) should work with the SmallHD 702 Touch but it has not been tested and may fail over time, sooner than expected.

Q: 4. What's the diff between these 2 Nalite Bowens mounts?: AS-BA-FZ60 and AS-BA-FMM. They're different items on Nanlite's web page.

A: The Nanlite Forza 60 Bowens Mount Adapter Nanlight lists only the Forza 60 as compatible while the Nanlite Forza 60 Bowens Mount Adapter BH #NAASBAFZ60 is listed as compatible with the Forza 60, 60B and Forza 150 lights.

Q: 5. Can this flash unit trigger another remote flash?

A: No, according to Fuji's website, the flash is a receiver only.

Q: 6. Can this be used with ad100 pro

A: No, the Nanlite Forza 60 Bowens Mount Adapter is not compatible with the Godox AD100 pro.

Q: 7. Can the half-yoke holder be taken off from the Zorza 60 when using this?

A: You could remove the half yoke from the Forza 60 when utilizing this adapter.

Q: 8. will the Aputure light doom II fits in this adapter?

A: We have not tested it but it should. The adapter is designed to fit a standard bowens mount accessory and light shaper.

Q: 9. Light weight Fuji flash cable

A: If your Fujifilm camera hot shoe is not working you can use the following adapter to attach this flash and trigger the unit from your camera if your Fujifilm camera has a pc sync port. Impact SCS-MPC PC Male to Hot Shoe Sync Cord (12") BH #IMSCSMPC • MFR #SCS-MPC https://www.bhphotovideo.com/c/product/1130423-REG/impact_scs_mpc_male_pc_to.html There is no TTL cable for fujifilm cameras and flash units.

Q: 10. Will this flash and the EF-W1 work with the Nissan i600?

A: Nissin i600 does not have a radio Nissin Air System (NAS) built in so unfortunately it won't fire from the EF-W1.

William	18/09/2024
[28.9 x 9 x 2.8"] The bracket was easy to install and can handle a wide range of sizes.It telescopes and swivels for the room it's in make it a perfect solution! 5

Ryan	12/09/2024
[Steel] This was exactly what we needed due to our uncentered stud spacing. It was the only mount we could find that would work. B&H had it in stock for the best price. 5

Lester	11/09/2024
[Tilt: -5 to 10°] Excellent compact and multi functional wall mount. Even has cover to hide some of the metal brackets. Well built and easy to mount on wall and put T.V. on mount. 5

Kevin	29/08/2024
[8.9 lb] Excellent chioce we made for the white one. Goes perfectly with our beige walls. Supports our 50'' TV and swivels in the directions we need 5

Michael	27/08/2024
[Tilt: -5 to 10°] I purchased this wall mount based on a recommendation from a B&H representative when I shared the model TV I was purchasing from B&H and how I wanted to position the TV. The wall mount arrived quickly at my residence, and when I picked up the box, I was surprised by the heaviness. This was a serious wall mount. Not having installed a TV wall mount before, I found the installation fairly straightforward. The installation instructions generally relied on graphics with minimal accompanying text. If I would ding anything, it would be the directions, which I felt could have had more detail. Once installed, the mount worked well and it handled my 77 TV with no issues. This wall mount is not the cheapest on the market, but it is worth every penny because of the quality materials. Highly recommend. 5

Kiare	21/08/2024
[28.9 x 9 x 2.8"] It's good, it mounted my 50 inch tv 5

Charles	19/08/2024
[28.9 x 9 x 2.8"] I chose this over other wall mounts because on 16 stud spacing, this mount can cover 3 of them. It might be overkill but on my heavier 60 plasma TV, it's worth the extra peace of mind. It sits snug to the wall but still allows a bit of tilt. If you want your display to sit closer to the wall, then I highly recommend this mount. 5

Russell	14/07/2024
[Tilt: -5 to 10°] Unless you have some kind of very custom installation, this is a very easy and adequate articulating arm. It's inexpensive and NOT cheaply built. 5

Todd	09/07/2024
[Steel] My tv is installed in a recessed space. With the new tv, I needed to install a full motion mount since the tv edge overhangs the recessed space. There was really only one stud to mount against so the Kanye PS400 worked great. I was able to level both the stand and the tv with the setup. Package includes all the bolts you might need. Only concern is the lower stand mount is a elongated hole to allow leveling but also allows the stand to tilt if too much torque is applied to the stand. However, I have the bolt tight enough enough to hail and not damage the stud. 5