Mount your 37 to 75" flat-panel display weighing up to 125 lb with the black Kanto PDX650W Full-Motion Wall Mount. It is compatible with VESA patterns between 100 x 100 to 600 x 400 and extends your display up to 21.8" from the wall, or retracts to just 2". The mount provides -3 to 15° of tilt and ±40° of swivel depending on your TV's width. Cable management clips are included to help keep your installation looking neat.

For 37 to 75" Displays up to 125 lb    100 x 100 to 600 x 400 VESA Support    -3 to 15° Tilt    Provides ±40° Swivel Adjustment    Extends 2 to 21.8" from the Wall    Includes Cable Management Clips

Articulating arms safely extend your TV up to 21.8" from the wall and swivel it 40° in either direction (depending on screen size), allowing you to achieve your preferred viewing angle wherever you're seated.

Achieve between -3 and 15° of tilt to reduce glare and improve line-of-sight when mounting your TV above eye level. The tilt head is designed for easy tension to allow for on-the-fly adjustments or to lock your TV in place.

The steel construction and heavy-duty lag bolts of the PDX650W support up to 125 lb, allowing you to mount a 75" TV.

The PDX650W includes wall plate covers and cable management clips to help keep your viewing area tidy.

Use the provided wall plate template to mount your TV to brick, concrete, or wood studs up to 16" apart. A carefully organized hardware box is also included with all the lag bolts, anchors, washers, and spacers you'll need for a custom installation.

• Powder coated finish
• Adjustable horizontal leveling

Related Questions and Answers

Q: 1. How does this attach to the camera?

A: This strap connects to the eyelets on your camera.

Q: 2. The Gopro MAX needs a stick that is less wide than its body at the mount, or else it becomes visible in the 360 shots. I can't tell whether this would work or not. Is the top of the stick more narrow than the body of the MAX all the way around?

A: The Revo Adjustable Selfie-Stick is compatible with the GoPro MAX 360 due to the 0.8" diameter of the stick.

Q: 3. 18" inches wide is reflective surface or frame?

A: The Angler Mini Catch Light Reflector V2 (18 x 37") 18inch is the width of the frame. The fabric is 15 inch width.

Q: 4. can I use this with the sjcam sj4000?

A: This will work with the SJCAM SJ4000 also.

Q: 5. Is the 58.5" measurement for the reflector mounted and curved, or is it taken from the reflector laid flat? Thanks!

A: The length of the outer curved surface of the Angler CatchLight Reflector V2 (24 x 58.5") will be 58.5 inches (1.49 meters) in length, whether the length is measured when the reflector is laid flat or when it is in its curved position.

Q: 6. Is there a way to control this with a Skaarhoj controller? Or control more than 1 with the provided remote?

A: No, Skaarhoj controllers are not compatible with the eMotimo Spectrum ST4 Motion Control Pan & Tilt Head.

Q: 7. Will it fit 6 inch phone? Like Nexus6? 3.5 inches wide.

A: This included smartphone mount will accommodate a Nexus 6 phone.

Q: 8. Will this charger work with Anton Bauer Dionic Digital series?

A: Hello Gabe, Indeed you will be able to charge the Dionic Digital batteries on our charger. We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 9. I use a battery case on an XR iPhone. How much thickness will this accommodate? I need ~ 18 mm (3/4 in.).

A: The JOBY GripTight ONE Mount for Smartphones (Black/Charcoal), B&H # JOJB01490, can accommodate smartphones with a depth of up to approximately 1.3cm.

Q: 10. Do the zippered closures on the back of the silver reflector make this model easier to assemble than the original Angler?

A: The Angler Mini CatchLight Reflector V2 (18 x 37"), B&H # ANCL22V2, can be assembled in 6 easy steps. See here: bhpho.to/3oqUMSY.