Attach a 26 to 60" flat-panel display weighing up to 88 lb to the wall with this black Kanto PS200 Full-Motion Wall Mount. It is compatible with displays with 100 x 100 to 400 x 400mm mounting patterns. Its distance from the wall can range from 2 to 13.8" and it provides -2 to 12° tilt, ±90° swivel, and horizontal leveling adjustments.

Supports 26 to 60" Displays up to 88lb    100 x 100 to 400 x 400mm Mount Pattern    Provides -2 to 12° Tilt Adjustment    Provides ±90° Swivel Adjustment    Adjustable Horizontal Leveling

• The steel construction supports up to 88 lb

• Extends up to 13.8" from the wall to provide a variety of viewing options

• The powder-coated finish helps provide a sophisticated look and feel

• Supports displays with VESA patterns ranging from 100 x 100 to 400 x 400mm; simply attach the included extension arms with the supplied nuts for 300 x 300 and 400 x 400mm displays

• Tilt your display the way you want with -2 to 12° of adjustment

• Swivels up to 180° depending on display size

• When fully retracted, the center of the display plate is offset approximately 13" left or right from the stud center

• Integrated cable management allows you to route your cables neatly between the wall and display

• The low-profile design sits just 2" from the wall when fully retracted

Related Questions and Answers

Q: 1. How do you close the Angler BoomBox ?

A: You simply pull on the metal ring on the inside of the umbrella to close it and push it open. There is a video on our website that shows this, click the link below to view; https://www.youtube.com/watch?v=Y8v-fxmi8Ro&feature=emb_title

Q: 2. My Sony Speedlights have a different type of mount than a standard shoe mount. Would that be a problem with this Angler Boom Box?

A: You would have no issue using this with Sony speedlight

Q: 3. is this large enough to shoot a group of people with ? (10 to 15)

A: No this is not large enough for a group of people

Q: 4. What is country is this make it?

A: As per our records, the EF-60 is made in China. Please note that this is subject to change at any time.

Q: 5. Does anyone know if this grid will fit on the Westcott? The Westcott doesn't have velcro on the interior and relies on diffuser fabric to fit like a cap on the exterior of the Octa.

A: No it will not fit

Q: 6. I'm planning to mount a Canon 580EX flash unit + a Impact Powerslave receiver on this softbox. Would these fit in the Shoe-mount ?

A: We believe that it should, but are not aware of any specific test done between the two.

Q: 7. I recently purchased the Westcott rapid box 26” to use with my AD200 however the deflector plate touches the bulb attachment of the AD200. Wondering if the distance is the same with the Angler BoomBox? It looks like a very similar design to the Rapid Box, but much cheaper.

A: The frame of the Angler has a similar depth to the Westcott RapidBox. It will not work with the AD200 with its supplied hardware.

Q: 8. Just received this Angler BoomBox. So far I enjoy it. I cannot for the life of figure out how to close the umbrella ?

A: You simply pull on the metal ring on the inside of the umbrella to close it and push it open. There is a video on our website that shows this, click the link below to view; https://www.youtube.com/watch?v=Y8v-fxmi8Ro&feature=emb_title

Q: 9. is it Bowens mount?

A: No, the Nanlux 26° and 60° Reflector Kit for Evoke 1200 is a proprietary mount and is not Bowens.

Q: 10. I bought the rapid pro 26” to use with my AD200 however the deflector plate touches the bulb. Would that be the case here?

A: You’re able to adjust the position of the flash or mini strobe (e.g. AD200), but it is possible that the glass cover portion of the bare bulb (if that’s the configuration in which you’re using your AD200) will come in contact with the deflector plate. If you’d like to move it back further then you can add an articulating arm such as this one between the cold shoe on the bracket and the 1/4" female mounting thread on the AD200, AD100, or AD300: SmallRig Double Ball Head with Cold Shoe & 1/4"-20 Stud (B&H# SM1135) https://bhpho.to/3fixlon