Your valuables will be safe from fire and theft inside the Barska FV-500 Fireproof Vault Safe | Secure Storagefrom Barska. This keypad-operated vault features a pry-resistant recessed door with three solid steel locking bolts, and withstands fire at temperatures up to 1700°F for 30 minutes. Offering a generous 3.45 cubic feet of storage space, the 17x13x27" interior is fully carpeted to protect contents from scratching and damage, and its two shelves can be set to whatever height you prefer or removed altogether.

The keypad will retain one personal identification number and is powered by an included 9V battery. Should the PIN be lost or forgotten, the keypad can be removed and the safe can be opened with the two backup keys. Constructed of steel and fireproof gypsum board, the safe measures 20x20x30" and weighs 169 lb. Mounting hardware is included to secure it to a wall.

3.45 Cubic Feet of Storage    Pry-Resistant Recessed Door    Fireproof for 30 Minutes at 1700°F    Carpeted Interior    Adjustable & Removable Shelves    Keypad Lock    Back-Up Keys    Three Solid Steel Locking Bolts    Mounting Hardware

• Keypad lock with backup keys
• Recessed door resists prying
• Three solid steel locking bolts
• Fireproof to 1700°F for up to 30 minutes
• Carpeted 17x13x27" interior with adjustable & removable shelves
• Mounting hardware included

Related Questions and Answers

Q: 1. will this enable the phone to be charged with a mag-safe charger?

A: Unfortunately, the Encased Mag-Safe iPhone Mount for DJI OM 4/4 SE/5/6 Gimbal does not state MagSafe charger compatibility.

Q: 2. Will this hot shoe adapter work on a Vivitar 283 on any camera?

A: Yes, it is compatible with the 283 flash on a hot shoe camera.

Q: 3. This unit runs on a battery. My question is, if the battery fails in the middle of a shoot, is the voltage protection disabled or will it allow high voltage from an older flash power pack to go to the camera?

A: Don't know. It doesn't work at all on my Olympus or Nikon cameras. Total waste of money for me.

Q: 4. This says it works for Sony NP-FV50 and 100. I have FV70. Seems based on Sony specs, that it should work, but not specified and non-cancelable. does it fit FV70?

A: NP-FV50, NP-FV70, and NP-FV100 share the same pin and width for fitment to plates such as Hedbox DV Charger Plate for Select Sony NP-FH, NP-FP, NP-FV Series Batteries.

Q: 5. Will the QR accept the Arrca -type plate from the Peak Design system?

A: Its take the Arca-type with 1/4 -20 mounting screw. I am using it with a fuji x-e2 With an arca/swiss handle and it works great. I would recommend this Barska ball head.

Q: 6. Will this work on a r6 MkII? If not, what will work on the R6MkII that has a PC sync connection?

A: The Canon EOS R6 Mark II Mirrorless Camera has the Canon Multi-Function Shoe. The Vello HSA-PVU Hot Shoe Adapter with Safe Voltage Conversion is compatible when using the Canon AD-E1 Multi-Function Shoe Adapter, BH #CAOCSAADE1.

Q: 7. Is this Pelican case made in the USA?

A: This item's country of origin is Mexico.

Q: 8. Does the warranty cover accidental breakage or only if the case just breaks for no reason?

A: The warranty for the Pelican Vault V550 Standard Equipment Case with Lid Foam and Dividers guarantees that it will be free of defects in materials and workmanship--accidental damage is not covered.

Q: 9. Can I plug my Norman 400 into the PC connection of the Vello and install my Nikon SB-910 on the hot shoe connection of the Vello and have them both fire simultaneously on my D300 and D3s?

A: Sorry, melahat m, your question is out of my range. I recommend that you contact Vello directly via their website and ask them the question. They were happy to answer my questions about this same vello adapterand were very helpful. Good luck in your search. Barry.

Q: 10. Two products that I have recently purchased from BH, first, Wein SSH Safe-sync, second, Vello HSA_PVU Hot Shoe Adapter, have both failed to fire the flash which is a Norman studio power pack connected via PC sync cord. I am connecting to a Nikon D3300 via the hot shoe on the camera. The camera hot shoe works to fire a portable flash connected directly, so I don't think there is a problem with the camera's hot shoe or maybe this camera cannot handle external flash connections? Nikon says that it can. What to do? Would a radio powered transmitter/transceiver work? Is this a camera problem? Thanks.

A: Unfortunately, we do not have enough information to assist you via this forum. The best I can state is if the camera's hot shoe is working properly, I would recommend trying the adapters with a different flash to see if the adapters fire with a different flash. If so, the issue may be the sync terminal of your power pack or the PC sync cable you are using. At this point, you have only eliminated the hot shoe as properly working, but have not identified if the adapter, sync cable, or sync terminal on your pack is the issue. All other variables have to be eliminated to find the issue. The above test would verify if the adapters are working. Switching a PC cable with a known working flash would indicate if the PC sync cable you are using is working. If the adapters and PC cables are all working with other items, then the issue may be the sync terminal on your power pack, which would need to be sent to Norman or a repair center for inspection/repair. If it is your sync terminal, then purchasing a wireless radio remote system would not work as they still utilize the power pack's sync terminal to connect the radio receiver/transceiver to the power pack. I would recommend to use the items you currently have to confirm or eliminate the issue. As you state the hot shoe on the camera is working, it does not seem to be a camera issue.