Atlasied Fap43T-W 4.5" Ceiling Loudspeaker Pair White

Atlasied Fap43t-w 4.5" Ceiling Loudspeaker Pair White

Product Code: eq180315
Availability: In Stock

$779.94 $1,130.91

Qty

18 reviews Write a review

Description
Reviews (18)

The white AtlasIED FAP43T-W 4.5" Ceiling Loudspeaker Pair Whitefrom AtlasIED FAP43T-W 4.5" Ceiling Loudspeaker Pair Whiteis a factory assembled loudspeaker that is optimally tuned, ported in an enclosure, and built with a 32W, 70.7/100 V transformer. It can be used in several environments in applications for retail stores, restaurants, recreational facilities, hotels, casinos, and more.

A convenient front mounted selector switch allows tap selection without the need to remove the loudspeaker from the ceiling. This switch also has a transformer bypass setting for 8 Ohms direct-coupled operation. In addition, easy installation in drop tile or sheetrock ceilings via the included C-Ring/V-Rail tile bridge.

There is a Safety First Mounting System that protects from over-torquing the mounting doglegs during installation and potentially cracking or breaking the mounting system. The result is no install tools required, no over-torqued doglegs, and no rusted screws, and quick installation.

70.7V/100V and 8 Ohms Operation Installs Without Drill or Screwdriver Waveguide Provides 110° Dispersion Ported Enclosure 4-Pole Detachable Phoenix Connectors

System
Type	Two way, full range, coaxial ceiling loudspeaker
Operation Mode	Non-powered Passive
Operating Range	50 Hz (-10 dB)
Frequency Response	60 Hz - 20 kHz (±5 dB)
Coverage	Vertical: 110° 800 Hz to 4 kHz Horizontal: 110° 800 Hz to 4 kHz
Max Input Ratings (8 Ohms)	50 W continuous, 100 W program 20 V RMS, 40 V momentary peak
Transformer Taps	70 V: 32 W, 16 W, 8 W, 4 W and low impedance (8 Ohms) 100 V: 32 W, 16 W, 8 W
Directivity Characteristic	Q: 9.57 @ 2 kHz DI: 9.81 @ 2 kHz
Input Sensitivity	90 dB (@ 1 W/1 m)
Max SPL	Passive: 107 dB continuous / 113 dB peak
Signal Processing	80 Hz HPF (recommended)
Amplifier Power	120 W at 8 Ohms (recommended)
Transducers
Low Frequency Driver	1 x 4.5" (11 cm)
Voice Coil	1" (2.5 cm)
High Frequency Driver	1 x 0.79" (20 mm)
Maximum Output	107 dB continuous / 113 dB peak
Nominal Impedance	8 Ohms
Crossover Frequency	3 kHz
Enclosure
Material of Construction	Enclosure: Powder painted CRS Grille: Powder painted CRS (RAL9016) paintable Baffle: UL94V-0 PC Mount: Zinc-plated CRS
Input Connection Type	4-Position phoenix type connector
Controls	Front-face power taps / low impedance selector switch
Mounting	Patented safety first mounting system
Safety Features	1 x safety hang point
Safety Rating	UL Listed to comply with UL1480, UL2043 and CSA60065 Suitable for use in air handling spaces per NFPA 70 and NFPA 90
Ingress Protection	IP-21
Environmental Testing	Humidity: MIL-STD-810G / High and Low Temperature: -4.0 to 158°F (-20 to 70°C)
Cutout Diameter	8.19" (208 mm)
Dimensions	9.57 x 9.57 x 7.27" (243 x 243 x 1.84 mm)
Weight	6.23 lb / 2.85 kg (unit w/ C-ring) 2.1 lb / 950 g (2V-rails)
Packaging Info
Package Weight	20 lb
Box Dimensions (LxWxH)	28 x 14 x 12"

Related Questions and Answers

Q: 1. Is this compatible with vinly backdrops, like Savage Infinity series? If not is there an alternative product for that?

A: Yes. 100% will accommodate a savage core backdrops.

Q: 2. Does anyone know if the wooden BMCC grips offered by tilta will attach to these handles?

A: These Universal Handgrips are compatible with the Tilta TT-0507 Wooden Handles as they both use Arri Rosettes

Q: 3. Do you have a replacement part that is compatible with a 1205 model?

A: I tried them for the 1600 model (round tubes) and they didn't fit. The 1800 has oval tubes.

Q: 4. Will it work with Tilta Cage for Komodo 6k?

A: Both items have ARRI rosettes, thus there should be no issues using these grips with the cage.

Q: 5. Are these lights flicker-free for video?

A: Unfortunately, the VIJIM GL01 has not been tested for video applications. Your results may vary.

Q: 6. Where can I find the red dividers for the Leica edition bags?

A: You will have to try and source those from Ona; Website http://www.onabags.com/ Email customercare@onabags.com

Q: 7. Will these work with a ARRI BSA-1 Broadcast Shoulder Adapter? The Rossette handle I have now wont because the screw is too long

A: The Tilta Professional Handgrip Side Arms (Pair) should fit on the ARRI BSA-1 Broadcast Shoulder Adapter since they have ARRI Rosettes, but for the best compatibility, we would recommend the ARRI Handgrip without On/Off Switch, B&H # ARK2.47861.0, with the ARRI Long Handgrip Extension (7.7"), B&H # ARK2.47863.0.

Q: 8. Will the Telesteps 1400E Ladder Replacement Feet (BH #TEF1400E) fit on the Telestep model1205?

A: No, it is only for the 1400E, 1600E, and 1800EP. You can find replacement feet for your model by clicking the link below; https://www.telesteps.biz/index.php?main_page=product_info&products_id=12

Q: 9. What are the dimensions and weight of the base?

A: The Atlas Sound SB36WE base measures 15" from corner to corner, but unfortunately we do not have a spec for the weight of the base alone.

Q: 10. Will the Tilta lightweight shoulder rig fit into the supplied case with these adapter attached?

A: The case for the Tilta Lightweight Shoulder Rig (Black) BH #TIALSRB is designed to work with the RIG without using Tilta Quick Adjust Rosette Adapter (Pair) BH #TIAARAPB. The case is very tight and may not fit the added parts.

Kickin Chicken	27/09/2024
[3 kHz] Great sound! Already had 4 in one room and added 2 more in another room. Fantastic speakers, nice low profile design for inside the ceiling. 5

Alok	21/09/2024
[IP-21] I purchased these in ceiling speakers for my covered patio area. Very clear sound and good bass response. The only thing I’m not a fan of is that the grill is not magnetic but has still not fallen out so overall I’m very happy with my purchase. 5

Reid	04/09/2024
[50 Hz (-10 dB)] Used in a school project. loved how easily i got them 5

anyonymous	03/09/2024
[28 x 14 x 12"] I used this speaker in a on campus weight room. Easy install. All parts included even the tile bridge. This speaker easily adapts to either a 70 volt or 8 ohm system. 5

Just us	17/08/2024
[1" (2.5 cm)] We recently remodeled our house and added 4 if these to our living room area. We love how they sound and watching movies with them makes you feel as if we are at the theater up the street. Listening to sports on them makes you feel as if you are in the arena watching the game. I'm am now getting on the site to order some outdoor speakers because I feel I cant go wrong with Polk by the pool as well. 5

Adam	04/08/2024
[8 Ohms] I got these for my Home theater, I have 7.2 system and use these as my back high speakers. I wanted a clean look so I opted for ceiling mount speakers. I picked these because I’ve had a great experience with Tannoy speakers in the past, and they are directional. 5

anyonymous	04/08/2024
[50 Hz (-10 dB)] like the multiple taps for different uses as needed 5

User	01/08/2024
[28 x 14 x 12"] Awesome just 1 speaker tweeter is loose and has a little muffled sound 5

MikeLBC	26/07/2024
[IP-21] I have a small 10'x5' bathroom but also have a small flat panel tv that is about 7' from the shower so I can't hear it. I bought a single RC6s, installed it about 1' away from the shower (these are supposed to tolerate high humidity) and connected it to an audio engine N22 amp. I hooked up the tv and also an old smartphone with Pandora and I now have an awesome bathroom setup. Great sound for a single in-ceiling speaker. Some songs come across "boomy" that have a lot of bass but that is nit-picking. Does anyone else even offer a 2 channel ceiling speaker? 5

Brandon	08/07/2024
[20 lb] Due to the relatively low cost, I was a little concerned that these would not satisfy our requirements for the space but man do these deliver. We have 4 of these running on one Sonos Amp in a large living room paired with a Sonos Sub. The speakers are mounted approx. 11ft off the ground on a sloped ceiling. VERY impressed with how they perform! 5