Create light around your subject or augment existing light with the Bolt VS-570F Wireless TTL Flash Fujifilm Camerasfrom Bolt. Available here to be fully compatible with Fujifilm's TTL, including use as a wireless slave flash, the VS-570F allows photographers to work quickly and comfortably by knowing that settings can be easily determined with the camera's automatic metering system. This unit also has good power output with a guide number of 141' at ISO 100 and 50mm and can cover a range of focal lengths from 24-105mm using the zoom head, or as wide as 18mm with the pull-out diffusion panel. You can even control output manually with power settings from 1/1 to 1/64.

In addition to on-camera TTL, the VS-570F can be set up as a simple optical slave. Multiple sync modes are available for complete control over your images, including high-speed sync and both 1st and 2nd curtain sync settings. The flash also has a recycle time of 0.5-9 seconds and can run on either 4 AA batteries or an external power pack, thanks to the inclusion of an HV power port. Additionally, for basic off-camera use it has a standard PC sync terminal.

Compatible with Fujifilm TTL    Guide Number: 141' at ISO 100 and 50mm    Zoom Range: 24-105mm (18mm with Panel)    Tilts Upward 90°    Rotates Right 120° & Left 180°    Wireless Slave TTL Functionality    High-Speed, 1st & 2nd Curtain Sync    PC Sync Terminal & HV Power Socket    Runs on 4 AA Batteries

Compatible with Fujifilm TTL

Guide number of 141' at ISO 100 and 50mm position

Zoom head offers coverage of 24-105mm on full-frame sensors with the ability to cover 18mm when the pull-out diffusion panel is used

Manual power control from 1/1 to 1/64

Tilts upward 90° and rotates right 120° and left 180°

Built-in reflector panel can bounce some light forward when the flash is tilted to fill in shadows and create catchlights

1.8" backlit LCD screen

AF assist light for working in dim lighting conditions

The flash can be set up as a wireless slave TTL flash unit

In addition to use as an optical slave the VS-570F can be set up as a slave TTL unit for Canon and Nikon systems

Wireless transmission for manual master and slave modes uses an optical pulse method with 33' range

Access to 4 wireless channels and

Optical slave timing modes include instant sync, skip one pre-flash, and skip two pre-flashes

Flash duration of 1/1000 to 1/20,000 second

High-speed, 1st & 2nd curtain synchronization options

PC sync terminal for wired connection to your camera

Recycle time of 0.5-9 seconds with NiMH AA batteries

Runs on four AA lithium, NiMH, or alkaline batteries or an external power pack via the HV power port

Port for updating firmware

Related Questions and Answers

Q: 1. does this work with the Canon ST-E3-RT?

A: The Phottix Laso TTL Flash Trigger Receiver for Canon B&H # PH89091 can be placed at the bottom of this flash so that the Canon ST-E3-RT can fire it.

Q: 2. For Canon Powershot cameras, how do you decide 1st curtain sync or 2nd curtain sync, and S1 or S2?

A: The right flash mode would depend on what modes are offered in the camera and the application. If using 1st curtain sync, the flash will fire when the exposure begins while with 2nd curtain sync, the flash will fire just before the exposure ends.

Q: 3. Is the shoe mount made out of metal or plastic ?

A: The shoe mount is mostly plastic with some metal parts.

Q: 4. Is this comparable with the Sony A7rii ? Will this work with the radio transmitter that comes with the bare bulb bolt ?

A: This flash has the Multi-Interface Shoe, which makes it compatible with the Sony A7R II. It will not be compatible with the dedicated radio trigger for the Bolt bare bulb flashes like the VB22.

Q: 5. Will the Pc port on this flash be able to trigger other devices when connected to it like a radio transmitter?

A: No, the PC sync port is input only. It will not send a signal out the port to work a transmitter.

Q: 6. Does it work with Pocket Wizard?

A: Yes. As the Bolt VS-570C Wireless TTL Flash for Canon Cameras has both a PC sync terminal on the side of the unit and a Canon hot shoe on the bottom of the unit, it would be compatible with with the PocketWizard FlexTT5 Transceiver for Canon, FlexTT6 Transceiver for Canon, MiniTT1 Transmitter for Canon, and Plus IV Transceiver radio remotes with their built-in hot shoes, and with all other PocketWizard remote using their PocketWizard PC1N Locking PC Sync Cable (1') included with the radio remotes.

Q: 7. Is this compatible with Sony FA-WRC1M (Wireless commander) A7R X?

A: To trigger this flash from a Sony FA-WRC1M, you would need the Sony FA-WRR1 Wireless Radio Receiver B&H # SOFAWRR1 attached to it.

Q: 8. What adapter will allow this to be mounted on Sony a37 with the older iISO shoe and still have full TTL/p-ADI functionality?

A: You are in luck. Here is the adapter, with TTL, that you are looking for. Vello HSA-CSASM Sony/Minolta to Sony Multi-Interface Shoe Adapter B&H # VEHSACSASM.

Q: 9. Can this flash be triggered wirelessly by an Olympus OMD 10 MK2?Is it compatible on camera with the OMD 10 MK2?

A: Yes, the Bolt VS-570OP Wireless TTL Flash for Olympus/Panasonic Cameras may be used with the Olympus OM-D E-M10 Mirrorless Micro Four Thirds Digital Camera and the Olympus OM-D E-M10 Mark II Mirrorless Micro Four Thirds Digital Camera for wireless flash usage. The built-in flash may be used to trigger the Bolt flash when the the cameras are set to RC Mode under the Shooting Menu in both cameras.

Q: 10. will this flash (BOLT VS-570OP work with DMCFZ1000?

A: Yes, the bolt flash will work the FZ1000.