Highwire Longstar Lite Ethernet Over Coax Adapter Non-Poe

Highwire Longstar Lite Ethernet Over Coax Adapter Non-poe

Product Code: eq180455
Availability: In Stock

$689.85 $896.80

Qty

17 reviews Write a review

Description
Reviews (17)

The non-PoE Highwire Longstar Lite Ethernet over Coax Adapter Non-PoEfrom Highwire Longstar Lite Ethernet over Coax Adapter Non-PoEprovides high bandwidth over extended ranges up to 4593', enabling a dependable connection to IP cameras and other remote network devices. This adapter is designed to be used with coax cable and IP cameras, eliminating the need for new cable runs. The HIGHWIRE Longstar Lite is designed to allow you to run IP cameras up to 4593' using 100Base-TX speeds and up to 13,780' using 10Base-TX speeds and RG11 cable.

Ethernet over Coax Adapter Extends 100Base-TX Ethernet Up to 4593' LED Indicators For Use with HIGHWIRE Longstar Devices

Parameters
Connectors	RJ45 Ethernet, BNC coax, DC in
Ethernet Interface	10/100Base-TX
Bandwidth	RG59: 100Base-TX: Up to 2263.8' (690 m) 10Base-TX: Up to 6791.3' (2070 m) RG11: 100Base-TX: Up to 4593.2' (1400 m) 10Base-TX: Up to 13,779.5' (4200 m)
LED Indicators	Coax: Green: On: 100 Mbps, Flash: activity Yellow: On: link, Flash: activity
Dimensions	4.5 x 2.2 x 1" (11.4 x 5.5 x 2.5 cm)
Packaging Info
Package Weight	0.25 lb
Box Dimensions (LxWxH)	5.4 x 2.4 x 1.2"

Ethernet over coax adapter for IP cameras and coax cabling

Extends 100Base-TX Ethernet up to 4593' with RG11 cable

For use with HIGHWIRE Longstar devices

Related Questions and Answers

Q: 1. Is this strong enough to hold a rovelight?

A: I'm not sure exactly what a rovelight is, but it will hold easily hold the largest diameter softliter and an einstein head, which is pretty heavy together, you can look up their weights and compare. It's just a burden fully extended even with the shoulder/waist strap (which is necessary with this much weight) so make sure the assistant is pretty strong and patient.

Q: 2. Will this work with a Photek Softlighter II?

A: This will work with any standard umbrella. I don't have any experience with the Photek, but unless it is larger than standard, it should fit fine. It is extremely well built and handy.

Q: 3. Is this a vixen dovetail mount?

A: It does not have a Vixen dovetail.

Q: 4. How would I attach an Elinchrom light? The black barrel is too wide and the brass fitting too narrow. Thank you.

A: Sorry I can't help,I do not use those lights.I use AB/Paul Buff.

Q: 5. How much weight load can carry in 45 degree position?

A: Your light stand will tip over before the swivel will slip. I'd say it would take 10-15 lbs or more, depending on how severely you wanted to tighten the handle. These are plenty tough for use with portable strobes.

Q: 6. What is the load capacity?

A: The capacity is not listed, but the Manfrotto Lite-Tite Swivel Umbrella Adapter BH #MA026 is designed to support umbrellas.

Q: 7. Is this the sort of mount I would use to hold a profoto a1? Newbie here. Thanks.

A: I have a few of these that I use with Nikon Speed Lights with Pocketwizards and they work well. They lock in place well and I've even had them handle a bit of wind without shifting. I don't know how much heavier the Profoto lights are though...

Q: 8. Can this support Godox AD400Pro with Impact 7" Parabolic Umbrella? I am looking for something sturdy.

A: Yes, the Manfrotto Lite-Tite Swivel Umbrella Adapter is constructed of aluminum and is very strong.

Q: 9. Can this adapter be used to hold an Alienbee and 7' parabolic umbrella?

A: Yes this adapter can be used to hold an Alien Bees monolight and a 7 ft Parabolic Umbrella.

Q: 10. What sort of accessory do I need to mount my speed light on this thing? I'm a bit confused as to which cold shoe adaptor/mount will attach to this. Any suggestions are appreciated.

A: If you are using a Nikon speedlight, you can use their little stand and screw the thing into the male stud.

lluvia30	25/09/2024
[10/100Base-TX] [This review was collected as part of a promotion.] These little adapters work pretty well. They do exactly what they are supposed to do. They extend my internet to other areas of my house where it normally wouldn't reach. The speeds are pretty decent and I really can't complain. 5

Satisfied ASUS Customer	24/09/2024
[0.25 lb] The MA-25 was easy to install. After installing the MA-25, my Internet connection speed on the branch of my home network where it is attached is around 500 mbps, which is about 200 mbps faster than my main ethernet connection. Am very pleased with the results! The MA-25 is well-constructed and includes everything needed to use it on your home network. I have used other ASUS products before and have always been pleased with them. I would definitely recommend the MA-25 to anyone needing to set up a MOCA network at home. 5

Jeff	14/09/2024
[0.25 lb] I've used these for over length cat6 cable runs in a school parking lot. The camera had 4 sensors and night IR. It also required 30W PoE at the camera. You will likely need to get a larger PoE injector for long runs that require PoE. I used a 60W PoE injector to run a 30W PoE camera out at about 600 feet. Need 60W PoE at the device, use the 90W PoE injector. Additionally, you will need one of these units for EACH side. 5

Britt108	07/09/2024
[0.25 lb] [This review was collected as part of a promotion.] I didn’t even know this was a possibility until now and definitely will not be going without anymore! These are a total game changer with a big family! We now have better connections everywhere in the house where it lacked before! 5

Larry	27/08/2024
[0.25 lb] When using this to power a Ubiquiti Wifi radio up on a tower, we only had to run the one RG6 coax, plug it in and done! Works absolutely great. I, especially, like the indicator on the other end to tell that everything is ok. 5

Leamon	13/08/2024
[0.25 lb] NVT offers a great solution for PoE to the cab on elevator travelers among other mediums. 5

Christopher	05/08/2024
[10/100Base-TX] Not too to say except that this seems like a quality piece of hardware and it works as described. It powered up my Wi-Fi access point immediately. 5

Jakin	04/08/2024
[10/100Base-TX] This worked right off the bat for us and some infrastructure where we could not pull new CAT cable but had pre-existing Coax. It's also a great bonus that they serve as PoE injectors if needed. Fantastic product. 5

Timothy	05/07/2024
[0.25 lb] Save yourself the trouble and connect your Ubiquiti devices requiring PoE+ to either one of these or one of their PoE+ switches. 5

Mrcruton311	22/06/2024
[0.25 lb] The only way I could get fast gaming on the Xbox One was by using my Asus routers, they’re pretty good for playing with my PC on a regular basis 5