The ETC CS20 20-Fader ColorSource Lighting Consolefrom ETC CS20 20-Fader ColorSource Lighting Consoleis a touchscreen enabled 20 fader DMX 512 lighting control console. The twenty faders can support controlling up to forty fixtures, and each fader has its own individual programmable bump button. Built-into the unit is a touchscreen display that allows you to arrange a lighting plot with the fixtures you are using. Remote Device Management (RDM) allows the console to identify enabled fixtures and auto-populate and patch them.

The console is flexible, with four user definable master faders as well as five user definable control buttons. You can program and save a cue list with 999 cues, and the unit allows you to save lighting looks to 10 pages with 20 playbacks each. In addition, you can program repetitive light patterns and apply them to channels and call them up as needed.

512 Channels of DMX Control    Supports up to 40 Fixtures/Devices    20 Faders with Bump Buttons    Touchscreen Stage Panel Display    Remote Device Management Compatible    Four User-Definable Master Faders    Five User-Definable Buttons    One Cue List with 999 Cues    10 Pages with 20 Playbacks    Programmable Lighting Effects

The console follows DMX-512 protocol, allowing you to control up to 40 devices over 20 channels. On fixtures that support it, you can control more than just dimming, including control of DMX-supported aspects of some fixtures such as motion, color, or beam control.

The Stage Map display is one of the views on the touchscreen. It enables you to visually see and move fixtures on the units Stage Map to match the fixtures on the actual stage. Finger-tip control allows you to navigate around the map, select/deselect fixtures, and aids in rapidly programming your show.

The 20 Faders can be set to be in either channel or playback mode. Two channel pages and ten playback pages are provided for creative programming. The operation of the bump button beneath each fader is dependent on the fader mode. When the faders are in channel mode, the bump buttons select/deselect the fader. When in playback mode, the bump button's behavior is based on the selected button mode.

Patching associates a console channel number with an address or block of addresses on the DMX output. Once you have patched in your fixtures, you can save your patch set up and recall it.

RDM enables fast set up by identifying any intelligent lights and automatically populates in Patch. This allows you to skip manually locating fixtures that are RDM compatible and speeds you on your way.

Related Questions and Answers

Q: 1. will it work with my Canon Mark II ?

A: Yes, the Dot Line TTL Flash for Canon is compatible with the Canon 5D Mark II.

Q: 2. Does it come with only one band?

A: Hi Jeremiah, Yes, this product comes with one tabbed band. If you want additional Rogue Gel bands we also offer separately a pack of 5 for $9.95. Best Regards,

Q: 3. Will this light work with a Allen Heath mixing board?

A: It will work with any mixing board that offers a 4-pin XLR-M 12 VDC output connection.

Q: 4. Does Loupedeck Live change the keys between app focus, or can it persist no matter what app is in focus like the Elgato Streamdeck?

A: The buttons do not change automatically based on the application that is open however you can create presets (workspaces) for each application and swap between the presets very easily.

Q: 5. Will this fit a Godox TT350?

A: Starting in September 2020 each set of Rogue Flash Gels was packaged to include 3x Rogue Gel Bands to attach the gels to a flash, including 2x Blue (standard size flashes) and 1x Gold (small flashes). The Blue Rogue Gel Band is sized for standard size flashes, including the Canon 430EX, Canon 580EX, Godox V860, Nikon SB 500, Nikon SB910, etc. The Gold Rogue Gel Band is sized for small mirrorless camera flashes, including the Godox TT350, Nissin i400, Nissin i40, etc. The Rogue Flash Gels will be larger than necessary to cover the face of the Godox TT350 flash, but they can be easily trimmed or creased as desired. Best Regards,

Q: 6. Will these fit a Nikon SB-900?

A: This is a great kit. And yes it will fit.... The kit comes with a rubber band that that expands over the largest eat strobes and comes in a really nice envelope that divides the various colors... Another great feature is that each gel tells you the f differential so you have a starting point to correct your exposure

Q: 7. Are the support mounts for the monitors / speakers supplied by Forecast or a third party vendor?

A: The support mounts for the monitors and speakers for the Forecast Consoles GC3-MR ImageMaster Edit Console are supplied by Forecast Consoles.

Q: 8. Will the gel band fit a Nikon SB-400 which has a fairly small flash head?

A: Yes. The Rogue Photographic Design Rogue Gels Universal Lighting Filter Kit (Set of 20 Gels) will fit on the Nikon SB-400 Flash Head. You would use the smaller Gold Flexible Gel-Band for this flash.

Q: 9. I plugged this lamp into my numero mixer. It won't turn on. What is wrong?

A: Try changing the bulb. If that doesn't work it's possible,the light is defective.

Q: 10. Are these laminated too?

A: B+W does not list how the B+W Polarizing Film for Lighting is manufactured. Chances are it is not laminated.