The white 2-Way Full-Range 15” Loudspeaker System from JBL is comprised of a 15” low frequency driver and a 1” exit/1.5” voice-coil compression driver. The horn provides 90° by 90° coverage in vertical and horizontal orientation. High-slope passive crossovers minimize band overlap and well-controlled off-axis response. The cabinet is fitted with M10 threaded suspension points. Four threaded inserts located on back of the enclosure allow attachment of a MultiMount or similar type mounting. The system is suitable for a wide variety of fixed installation applications.

• Robust 15mm enclosure with black textured finish
• 15” LF transducer
• 90° x 90° Waveguide with a 1” exit
• 1.5" voice-coil compression driver
• Dual Neutrik NL4 connectors plus screw terminals
• Multiple attachment points for ultimate flexibility

• Performing spaces
• Clubs & bars
• Houses of worship
• Multimedia spaces
• Retail & hospitality spaces
• Presentation suites
• Educational facilities

Related Questions and Answers

Q: 1. Can someone share a photo of how they used a clamp instead of drilling holes in to the desk? Would love to see it successfully done and what material used to clamp.

A: The base plate of the 12" riser that is included with the O.C. White ProBroom Deluxe Mic Arm is designed to attach permanently to the desktop using four screws. To give you a better example of a stand with a riser that attaches using a clamp, check out the Auray BAE-2X Two-Section Broadcast Arm with External Springs & Integrated XLR Cable (B&H # AUBAE2X).

Q: 2. How does the arm mount to your desk? I don't see any clamp mechanism typical of these arms.

A: This is meant to be a surface or wall mount. The base has four holes for screws so you can attach it to a wall, a ceiling, or a window sill.

Q: 3. How to mount the camera?

A: This camera can be mounted to walls or ceilings. You will find a few recommended mounts on the "Accessories" page under the "Mounts and Brackets" tab.

Q: 4. how hard/easy is it to program the frequencies into the radio ?

A: You do not program this radio, it is set for GMRS frequencies when recieved

Q: 5. Is there any retraclable ceiling mount mic stand? Thanks

A: Yes. Please review the following item K&M Ceiling Mount Microphone Stand BH #KMCMMSB • MFR #22150.500.55 https://www.bhphotovideo.com/c/product/1469401-REG/k_m_22150_500_55_ceiling_mount_microphone_stand.html

Q: 6. Can it fit Nikon D750 with AF-S NIKKOR 24-120mm f/4G ED VR Lens, without removing it?

A: My Pentax fits with a lens plus 1.7x attached, which is 4 long. If yours is much longer than that, no. I looked at the dimensions of your lens and it says it's 9.4 That doesn't seem likely, but if that is the case, no, it won't fit. My camera is 2 front to back. The depth is about 7 in the backpack.

Q: 7. I noticed the VT-400 and VT-3000 have the same base price. Any thoughts on why I should buy one versus the other?

A: Stability, size, and height. The VT-3000 is heavier-duty but also a little larger and heavier.

Q: 8. Does it pass along 3V plug-in power from the camera to run a lavalier?

A: Yes. Power is passed thru; photos show a lavalier mic connected, which would confirm this.

Q: 9. Will this bag fit a Canon T5 and two lenses? Also is it waterproof, dust proof and shockproof..? Thank you for answering my questions!

A: Yes, it will fit your camera and lenses. This bag is weather resistant and well padded to protect the equipment but is not classified as shockproof.

Q: 10. I was looking at the tripod and noticed there is a crank to raise and lower the center column. Is that removable or do you have to use it every time? It seems a bit cumbersome.

A: As far as I can tell, the hand crank is NOT removable. You do NOT need to raise the center post unless you wish to. The hand crank has NOT been an interference to me.