With 1,500VA / 1,350W simultaneous sine wave output, the CyberPower 1500VA Sine Wave UPS Rack/Towerfrom CyberPower 1500VA Sine Wave UPS Rack/Toweris designed to provide sine wave output to a variety of electrical devices requiring seamless power protection. With double-conversion UPS topology, connected devices such as servers, lab equipment, and other high-end components aren't affected by a transfer time when switching between regular power and backup power. The system is even expandable, making it easy to increase the amount of battery backup that is available, thus increasing the time devices can be powered using this UPS.

With fast charge technology built right in to this UPS, the batteries can be recharged and swapped out when needed thanks to hot-swap support. Setup and configuration is simple, as this UPS features USB and serial connectivity and is compatible with Windows, Linux, and VMware systems. Once configured, EMI/RFI filters ensure that connected equipment receives clean power while the resettable circuit breaker protects devices should the current become too high. Users can even see the status of the UPS, thanks to LED status lights depicting power on, line mode, battery mode, bypass mode, fault, and full replace statuses.

1,500 VA / 1,350 W Output    120V Input    8 x Battery Powered Outlets    4-Hour Recharge Time    Audio Alarms    USB/Serial/SNMO/Relay/EPO Support    Telephone / Network Data Line Protection    ENERGY STAR Qualified

• Prevents power surges that travel through telephone and Ethernet lines from causing damage to electronics.

• Provides consistent and clean power, regardless of the condition of incoming power.
• With this technology, the system operates on isolated DC power 100% of the time, which means it has a zero transfer time because it never needs to switch to battery.
• This double-conversion UPS system is designed for high-end system components, corporate servers, lab equipment, and other sensitive electronic devices.

• Provides power protection to ENERGY STAR 6.0 systems with Active PFC power supplies.

• Displays UPS statuses and customizable operating settings from up to 10’ away with an optional cable.
• This LCD control panel can be configured in English, Spanish, or French for ease of use.

• Extend runtime by adding BP36V60ART2U EBMs (available separately).
• Up to ten modules can be added to this UPS unit.

• Allows UPS batteries to return to 100% capacity more rapidly by utilizing a built-in charger inside each EBM.
• Restores a complete charge within 5 hours regardless of the number of EBMs.

• Improves and extends the functional life of a UPS battery and reduces excessive heat during work cycles by using a three-cycle charging process.

• Improves UPS efficiency up to 93%; saves on electrical and cooling costs.

• Eliminate downtime related to UPS power maintenance for continuous power availability.

• UPS has two banks of outlets which can be configured so that the non-critical loads shut off after a set timeframe to provide additional runtime for the critical load outlet.
• Users can prioritize their equipment runtimes to maximize the output of the UPS to meet their power requirements.

• Allows the UPS to be shut off in the event of an emergency, when the EPO port is connected to an EPO switch.

• Provides stable sine wave output (free of harmonics and distortion) without switching to battery mode when running on generator input power.

• Provides the flexibility to set the output frequency, regardless of the input frequency, to match connected equipment by selecting 50 or 60 Hz output on the LCD control panel.

• Enables full integration with built-in power management and auto shutdown features on Windows, Linux, and VMware systems through a HID-compliant USB port and Serial port.

• Prevent electromagnetic and radio frequency interference to ensure clean power for connected equipment.

• Identify when the model is running on battery power, overloaded, or has a low battery.

• Interrupts an electric current in a circuit when the current becomes too high.

• Indicate power on, line mode, battery mode, bypass mode, fault, replace battery.

• Allows for horizontal rack or vertical tower installation.

• Provides IT professionals with tools for monitoring and managing the UPS and backup power.
• This software offers remote management functionality.

• This CyberPower UPS system is a Cisco EnergyWise compliant end device.

• ENERGY STAR certified Uninterruptible Power Supply (UPS) system.

• CyberPower will repair or replace properly connected equipment if it is damaged by a power surge.

Related Questions and Answers

Q: 1. Is this battery pack compatible with Impact VC-500WL 2-500Ws Monolight?

A: Yes.I am currently using Photogenic power light 1250 two of them are 500w .Make sure modelling light in off position.

Q: 2. Is this compatible with two, sk 400 godox monolight ?

A: Yes.I am using photogenic1250 two of them on location 500w not full power.Modeling light switch off.First bought in april 2013,second one bought in may 2015.At reception make it wireless on 3 wheel light stand.easy to move around.ION photogenic are good for two SK400 moonlight Godox.

Q: 3. can this be used as an external power supply for a Canon EOS 7D? If so, what else would I need to do so.

A: You can use that battery inverter but you will need this to plug the camera into it, Canon AC-E6N AC Adapter and DC Coupler DR-E6 Kit B&H # CADRE6K (B&H Kit).And this is another option and it is the adapter and battery Tether Tools Case Relay Camera Power System Kit with Coupler for Canon Cameras with LP-E6 Battery B&H # TECRUPS110K4 (B&H Kit).The bonus on this by Tether Tools is you can add a battery that uses a usb connection and it will not stop the camera. So it is hot swappable.

Q: 4. Does this come with Australian power plugs or just USA ?

A: I am in the U. I purchased mine From B&H for shipment to the US, and received only a US plug.Additionally & Tangently:It has made using a photogenic Power light with a larger umbrella/softbox much more practical on location.I use Quantum Flashes for most things, but when I need the extra power, this works well.

Q: 5. What is the typical time to charge the unit so it has a 100% charge

A: I only had it for a week, then returned it. Charged it twice. Took about 3-4 hrs. My problem was it didn't give nearly the amount of flashes that they advertised. Maybe it was the units I was using it with, photogenic 1250s. I don't know. Hope this helps.

Q: 6. will this work with a norman d12 pack?

A: This pack is not rated for 1200 watts , it will work at half power

Q: 7. Is this battery compatible with Paul C. Buff whitelighting 1600?

A: think it will work with anything that plugs into a wall outlet!

Q: 8. Will this work with Profoto 600 monolights? Will it power an Acute 1200 pack? Thanks

A: This Photogenic ION pack is suitable for a monolight up to 1000 watt/sec such as the Photogenic Powerlight 1000.

Q: 9. How does this perform with the Profoto D1 or D2 monolights? Will it maintain the same recycle speeds as if the light were plugging in?

A: I have other mono lights, but I have not noticed any difference in recycle time. The inverter is providing a portable electric outlet for you. From that standpoint, it is really the same as if it were plugged into a wall.

Q: 10. Will it work if you leave the modelling light on?

A: Best practice is to not use the modeling lamp while on battery power since it will quickly drain the battery.