Atlasied Dpa2402 2400W Networkable Power Amplifier

Atlasied Dpa2402 2400w Networkable Power Amplifier

Product Code: eq180577
Availability: In Stock

$5,651.97 $7,912.76

Qty

9 reviews Write a review

Description
Reviews (9)

Designed to power audio signals in large-scale presentation rooms, training facilities, conference centers, and other situations in which background/foreground music is required, the AtlasIED DPA2402 2400W Networkable Power Amplifieris a 2400W multi-channel power amplifier featuring a network-based configuration for remote-web monitoring, as well as on-board DSP. Its four-channel setup can be configured in three different arrangements to meet the needs of any large-scale situation.

The unit is factory set to operate in a two-channel 70V mode, though it is designed to operate with low-impedance amplification as well; in those cases, you can configure the amplifier to handle loads of 4 or 8 Ohms. Additionally, the DPA2402 can be tweaked to simultaneously work in low- and high-impedance situations, allowing you to utilize 70 or 100V channels for background and paging, while dual 4 or 8 Ohm channels carry audio material in the foreground.

While the unit comes with four balanced line inputs, there's also an accessory slot which, if utilized, allows you to either add more analog inputs or route the unit into a Dante system. All inputs can be mixed into any amplifier channel, with each channel featuring an array of DSP tools such as EQs and limiters to tailor the sound for any room. Furthermore, outputs can be controlled through built-in pots or via the on-board GUI, and when networked, proprietary software will allow you to control various aspects of the DPA2402, or indeed, any DPA amplifier patched into the network. This unit takes up 2 RU of rack space.

2400W into 70V, 100V & 4 Ohms Multi-Channel Operation Network-Based for Remote Monitoring Foreground / Background & User Paging Card Slot for Dante or Additional Inputs On-Board DSP with EQ, Limiter & Filters Multiple Points of Control 2 RU Rackmount Unit PC, iOS & Android Compatible

Type
Type	2400 W 4-Channel configurable-network digital-commercial power amplifier
Power Supply Type	Switch mode with universal power supply
Amplifier Class	Class AB Hybrid-BASH
Number of Inputs	4 x fixed inputs, balanced, expandable to 8 via accessory card 4 x Accessory inputs
DSP	Internal
Network	Ethernet
Card Slot	1 x for Dante receiver card or DPA-AMIX
Output Power
Channels	2 x 1200 W at 70.7 V 2 x 1200 W at 100 V 4 x 500 W at 4 Ohms 4 x 300 W at 8 Ohms 1 x 1200 W at 100 V + 2 x 600 W at 4 Ohms 1 x 1200 W at 70.7 V + 2x 600 W at 4 Ohms
Inputs
Input Impedance	40 kOhms
Input Sensitivity	750 mV balanced, 0 dBu
Maximum Input Level	14 dBu, 3.82 V
Connection Type	3.5 mm Euro Block
Accessory Slot Cards	4-input Dante digital card (DPA-DAC4) or 4-input analog Mic/Line analog card (DPA-AMIX)
Controls/Indicators
Front Panel	Removable knobs and security cover
GUI	PC (requires Ethernet cable), iPhone, Android, using a standard web browser
Status Indicators	Power: Blue indicator Standby (Remote turn on): Blinking blue indicator, front panel only Output signal: Green indicator LED bar meter: GUI only Output limit / protect: Red indicator 2-channel operation, 4/8 Ohms: Yellow indicator on channels 1/2 and 3/4 70V / 100V operation: Yellow indicator on channels 1/2 and 3/4 Output mute status: Flashing red indicator
DSP	IO routing: Matrix mixer High- and low- pass filters: One per output, adjustable slopes (6, 12, 18, 24 dB per octave) and frequencies EQ: 5 parametric filters per output Delay: 60 ms per output Limiter: Each output up to 12 dB of assignable limiting DSP frequency type: 48 kHz / 24-bit
Ports & Connectors
Control Ports	4 x PHX, remote and mute functions, assignable (rear panel) 1 x RJ45 Ethernet for GUI access (rear panel)
Output Terminals	Output connectors type: screw terminal barrier strip with cover Output connectors number of terminals: 8x Output connectors fixed or removable: Fixed Wire size: 18 to 10 AWG when using yellow spade lug 0.250 terminal, 8x included (Class 3 wiring required) Terminal spacing: 0.300" / 7.62 mm Current rating: 25 A per terminal
General
Defaults	Amplifier configuration: 2-channel 70 V Mode (channels 1/2 = 70 V, channels 3/4 = 70 V) Level controls: front panel assigned, channels 1 and 3 levels active GPIO control ports (rear panel): Remote level, C1 assigned to channels 1/2 at 70 V, C3 assigned to channels 3/4 at 70 V I/O matrix: Input 1 Routed to Output CH 1/2, Input 3 Routed to Output CH 3/4 Auto power down (APD): Disabled
THD	0.03% at 1 kHz and 1 dB below rated power
Signal to Noise Ratio	> 100 dB below-rated output, A-weighted
Frequency Response	20 Hz to 20 kHz (DSP filters set flat)
Damping Factor	20 Hz to 400 Hz: 78.46
Crosstalk	Channels 1/2 and 2/1: 73 dB
Peak Output Voltage	At 8 Ohms per channel: 55 V At 4 Ohms per channel: 11.5 A
Slew Rate	> 6 V/µS
Protection	High/low input voltage, thermal, short, over current
Power Requirements	Operating voltage: 110 V to 120 V & 220 V to 230 V at 50/60 Hz, auto sense Minimum power-up voltage: 90 V Maximum operating voltage: 264 V
Mains Power	IEC 15A receptacle
Power Cord	Included: 4.9' / 1.5 m, IEC C13 to NEMA 5-15P plug, 18 AWG
Power Consumption and Current Draw	Sleep mode: 94 mA, 2.2 W, 12 BTU Standby APD mode: 199 mA, 19 W 65 BTU Idle active mode: 246 mA, 26 W, 88 BTU Average power at 4 Ohms, all channels driven: 3.2 A, 375 W, 426 BTU Average power at 70 V, all channels driven: 3.5 A, 415 W, 446 BTU Maximum power at 4 Ohms, all channels driven: 10.2 A, 1189 W, 775 BTU Maximum power at 70 V, all channels driven: 9.5 A, 1245 W, 1818 BTU
Cooling System	Idle: convection In use: Signal-sense variable-speed fan assist Air flow direction: Rear to front
Rackmount Space	2 RU
Dimensions	19.0 x 3.5 x 14.5" / 48.3 x 8.9 x 36.8 cm
Weight	20.8 lb / 9.5 kg
Packaging Info
Package Weight	25.32 lb
Box Dimensions (LxWxH)	24.5 x 19.1 x 5.5"

2 x 1200W 70V/100V (Factory Default)
4 x 500W at 4 Ohms
1 x 1200W 70V/100V & 2 x 500W at 4 Ohms
No computer required to operate
Networkable
Configurable DSP via GUI
PC based DPA site manager software with LAN IP auto-discovery, fault reporting, input and output status, standby status and amplifier remote activation via a scheduler timer
On-board web browser GUI for remote monitoring of status and levels
User page with assignable level control, post contractor settings, password protected
Mute assignments triggered via audio signal or contact closure
Audio-sense auto power down (APD)
DSP parameters per output, parametric EQ, high- and low-cut filters, delay, limiter
4 x balanced inputs, expandable with accessory card
Optional accessory card slot for a DPA-DAC4 4-channel Dante receiver or a DPA-AMIX card
PC-, iOS- & Android-controllable
Assignable level controls, onboard GUI (security password protected) or by front panel pots with tamper deterring covers
4 x GPIO control ports assignable in GUI for mute or remote level
Controllable from third-party controllers

Related Questions and Answers

Q: 1. What is the output ohms for the speakers?

A: its 4-8ohms

Q: 2. Can a powered subwoofer be connected to the REC OUT jacks?

A: The REC OUT on the Pyle Pro can be used with a powered subwoofer, however the signal output from this set of jacks is not affected by the master volume. If you turn down the main volume, the incoming signal is still fed to the connected device (subwoofer).

Q: 3. What is the speaker Output ohms for a pyle pro ptau45 mini 120 watt?

A: This amp has a 4 ohm speaker output.

Q: 4. I just read Bass, Treble, and Balance Controls YET if you look at the photo of the face --NO bass, NO treble, NO balance controls? Where are they?

A: To get to change the Bass, Treble, Balance, there is a button labeled Audio Functions press it and it goes thru all three choices to you can change it to how you like it.The EQ button gives you optional pre set sounds Classical, Flat, Pop, Jazz, JazzRock sounds best to me.I just wished it allowed 2 sets of speakers. I always make sure I turn the speakers down to off before I snap it off or on, so I don't blow anything..

Q: 5. Does this allow microphone to be used at same time with other sound source like aux? So is it a mini mixer+amplifier likely thing?

A: Correct: Switchable MIC PAGER and MIXING ModesSet to PAGER, the signal from AUX 1/AUX 2/CD will be attenuated BY -12dB and the signal from MIC will override to page (Auto Talkover), it is good for paging system. Set to MIXING, the signals from AUX 1/AUX 2/CD and MIC will be existed at the same time, it acts like playing at KARAOKE event.

Q: 6. Pyle Pro PTAU45 Mini 120 Watt x 2 Stereo Power Amplifier, can you plug in an iPod to the USB connection and listen to music, assuming you have speakers hooked up?

A: I never tried that because I have a Harmon Kardon BTA-10 Bluetooth receiver that I also bought at BH Photo connected to one of the Aux inputs. It works great and has an amazing receive distance. I got no strings on me!

Q: 7. I have an existing set of speakers going to my pool deck (Ch.2), and a set at the pool house (Ch.1). I'm looking to amplify the ones on the deck (Ch.2) so I have a balanced volume. Can I connect the existing speaker output (Ch.2) speaker to the input AUX. of this amplifier then run the speaker output from the amp to the pool deck and boost the volume?

A: Adjust the balance control.

Q: 8. What kind of mic do i need to use with this amp?

A: Use a dynamic type microphone: Example: Audio-Technica ATR1200 Cardioid Handheld Dynamic Microphone B&H # AUATR1200

Q: 9. Can I connect my nextbook for better sound?

A: You can hook up any audio source with an auxillary cord. I've used phones, iPads, and IPods without an issue so I'm assuming your Nextbook would be similar.

Q: 10. PTAU45 POWER STEREO AMP: What is the frequency response of this amp?

A: Frequency response is rated at 20Hz-20KHz. We connect all sorts of electronics to these and find there sound quality to be just fine for small to medium group listening. Your speakers will likely be the limiting factor if you choose to run these amps for these groups.

CroRam711	14/09/2024
[> 6 V/µS] Perfect, easy integration with my SR6011 and definitely opened up my Vienna Acoustics Mozarts, which already sounded very nice but soundstage, detail and bass noticeably came alive after adding the MM7025. It’s a quality piece that performs as advertised. I’m a fan and my only hesitation is wondering if I should have gone with the 7055 to let the rest of my main surround setup have 5 channels of clean power goodness. But I think this definitely covers the most critical ground and gives the 6011 some breathing room to handle center, surround, atmos and outdoor speaker duty. Amp and system runs cool with these speakers at 85 db+ listening (fan hasn’t kicked on that I’ve noticed) but will add cooling as needed or if my new Reserve R600s prove to be a bit less efficient. All in all, highly recommended. 5

Charles	07/09/2024
[Ethernet] I've used several of these for paging systems in large installations. Prefer these to Bogen any day. Clean, quiet and plenty of power. 5

Nicholas	17/08/2024
[25.32 lb] Really great to hear the details otherwise lost in built in amplifiers. This is a bargain for what you get. Midrange is on-target, dynamic swings are much more evident in critical music listening, and the low end is really sweet. Runs much cooler than the built amplifier in a Denon x3700 AVR. Dedicated power is a huge improvement and really the only way to go! 5

Ethan	13/08/2024
[2 RU] It drives my 70v system well with plenty of headroom. Very simple interface and controls for a simple device. 5

Steve	07/08/2024
[Internal] perfect for the half rack space I had available (compressor on other side) and keeps all my cords - amp, pre-amp, compressor hassle free and plugged into the back so I only need 1 outlet. Wasn't sure about the front outlet, but its perfect for my tuner...other solutions out there for cheaper, but not with the power conditioner, so I say well worth it. 5

Jay	01/05/2024
[2 RU] We were using this model to music in our lobby and it lasted 7 years. We just bought another one and works great! 5

Eric	23/04/2024
[40 kOhms] This power conditioner was backordered for months, but it was well worth the wait. It's low profile easily fits in half a standard rack with ample switched and unswitched outlets, making it a versatile choice for studio or mobile applications. 5

Scott	08/04/2024
[> 6 V/µS] Matches with my Marantz Sr5015 perfectly. Can notice a difference with 2 channel stereo music. Super fast cross country shipping. Thanks B&H 5

Daniel	08/04/2024
[2 RU] Product shipped quickly. Ordering was a breeze...website very intuitive. And amplifier worked the second I plugged it in. Very smooth process. 5