The LEM-1DL 1-Call Access Sentry Master Station from Aiphone features a built-in door-release relay and can be used with the company's LE and LS Series Door Stations. This master station can be mounted to a wall or to the top of a desk for convenient access. It requires a single power supply for powering both the master station and an attached door strike unit (available separately).

Master station with door-release button

A single power supply can be used to power the master station and the door strike unit (not included)

Can be mounted to a wall or to the top of a desk

Compatible with LE or LS series door stations (available separately)

Related Questions and Answers

Q: 1. Does each one of the modules require hardwire (RJ45) connection to main unit?

A: This unit will need to be connected to a switch for POE power

Q: 2. can this v-mount plate fit or carry a sony BPGL95 battery?

A: Yes, the TV Logic V-Mount Battery Bracket can receive the Sony BPGL95 Battery.

Q: 3. can additional stations be added to the system?

A: The Aiphone JOS-1V system can be expanded from one indoor and one outdoor station to two indoor and one outdoor station. The expansion indoor station is the Aiphone JO-1FD, a href= http://bhpho.to/1B4mG5r target= _blank http://bhpho.to/1B4mG5r/a

Q: 4. Hi, have a hearing impaired mother struggling with the new GT-1D fitted recently. Can the handset have a louder ringer fitted?. Its turned to MAX now on the bottom switch. All assistance appreciated

A: Aiphone currently doesn't offer any option for switching out the ringer on the handset with a louder one.

Q: 5. Will you supply an Australian power supply cord with this?

A: No. This is a (US) model. There are international UAPs. Also, please note that since this is 802.11af POE compliant, any decent POE switch can power it.

Q: 6. can i use the us version internationally in the UK?

A: I would bet yes, in the UniFi controller software I can choose where my site is. And that should limit and control what channels it will use. Other than that be mindful of what channels are legal and be sure to only use those channels.

Q: 7. Is this just the button and I must also separately buy a station, or is this the whole intercom?

A: This is just the door unit. If you don't have a system, you need to buy a complete one like this one: a href= http://www.bhphotovideo.com/c/product/1040537-REG/aiphone_lem_1dls_access_sentry_system.html target= _blank http://www.bhphotovideo.com/c/product/1040537-REG/aiphone_lem_1dls_access_sentry_system.html/a

Q: 8. We installed one unit in the guest bedroom and the neon glows a bit much, can we cover the unit with material to dim the glow?

A: Hi! Rather than physically covering the unit, you may want to consider simply disabling the built in LED. To do this (using the desktop UniFi controller software): Login to the UniFi controller -- Select Settings (Gear icon) --Select Site -- Uncheck the option to enable the status LED -- Select Apply Changes. Please note that this applies to all of the access points you manage (unless you have set-up multiple sites); if you have more than one access point, all of their LEDs will be disabled. If you are using the mobile application to manage your device(s), the ability to disable the LED is coming in a future update. As for physically covering the unit, I suppose you could do so with minimal effects (depending on the material), but I would strongly suggest disabling the LED over covering the unit. The last thing you want is to adversely affect the signal emitted from the device.

Q: 9. Can the existing doorbell wire typical of a NuTone system be used, or is new shielded wire needed?

A: AiPhone recommends: Bolide Technology Group BP0033/22-4 Professional Grade 22/4 Alarm Cable (1000', White)B&H # BOBP0033224Bolide Technology Group BP0033/22-6 Professional Grade 22/6 Alarm Cable (1000', White)B&H # BOBP0033226

Q: 10. What real world wifi speeds are you all seeing with these WAPs? I have gigabit internet that runs about 800-900mb/s on all the wired devices, but only see between 70-120mb/s when on the AC wifi using Luxul WAP-1510's.

A: We've seen up to 400mbs on these. However a typical wi-fi AC connection depends on the device, distance, interference, etc. Real world for us is 120-180mbs for most devices.