You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Nila 40° Holographic Lens For Boxer Led Light

Nila 40° Holographic Lens For Boxer Led Light
  • Product Code: eq180614
  • Availability: In Stock

$291.00 $430.68

The Nila 40° Holographic Lens for Boxer LED Lightfrom Nila 40° Holographic Lens for Boxer LED Lightchanges the light's beam spread.

Narrows Light Beam Beam Spread

Parameters
Beam Angle40°
CompatibilityBoxer

Related Questions and Answers

Q: 1. By any chance is this splash proof? Plan to use it while detailing vehicle.

A: The Beacon light https://bhpho.to/2Levemv is IP65 water resistant. The batteries are not.

Q: 2. How does this light interface with the phone? Can the brightness and temp be control via phone?

A: The light controls are all on the device itself.

Q: 3. Does it works with APO Skopar 90mm f mount?

A: It will not fit the 90mm Skopar Nikon mount lens but this hood will. Please take a look at the following link: https://bhpho.to/3Ai35U9

Q: 4. Can the HN-40 hood screw on to any non-Nikon lens with a 46mm thread?

A: Yes, this can thread onto anything with a 46mm thread.

Q: 5. How many lumens?

A: The Nila Varsa V2 Daylight LED Lamp Head BH #NINV2D is a 75w light that uses lenses to achieve 100,000LUX at 1 meter. It is not rated in lumens.

Q: 6. Is this bowens mount or only for nanlight? Would it fit the godox mount on 60bi lights?

A: The Nanlite CN-18X Fresnel Lens for P-100 LED Light BH #NACN18X is specifically for the P-100 LED.

Q: 7. what is the size (dimensions) of the light?

A: Product Dimensions: 2 x 13.2 x 8 cm; 168 Grams

Q: 8. How long will the light last on a full charge?

A: The LEDM150 is able to provide the maximum brightness continuously up to 60 minutes when fully charged.

Q: 9. D tap to run off a Battery ?

A: Yes, for your DC power needs please review the following item. Nila Battery Adapter Plate (V-Mount) BH #NINBTVM • MFR #NBTVM https://www.bhphotovideo.com/c/product/1247162-REG/nila_nbtvm_v_mount_battery_adapter_plate.html

Q: 10. Is this threaded to allow a filter to be screwed in while the hood is in place?

A: Yes the inner thread can accept 46mm filters.

26/09/2024

[40°] Great product, durable quality and narrows the beam perfectly

5
12/09/2024

[40°] Excellent product from Broncolor and excellent service from B&H as usual! Thanks Andr Obeid - Photographer - andreo.ch

5
27/08/2024

[Boxer] This grid is fantastic. The sturdy frame design is a awesome , it pops up like a reflector and gives the grid a hard frame edge that mounts securely to the Taiko. The actual grid is also a thicker material than what I've seen in previous lights, all this helps the grid stay in place, and not get damaged when you fold it up. This thing is heavy duty! Another huge help is the grid doesn't get in the way of the yoke so you can still tilt the light whatever direction you need without it hitting. The directional 40 degree beam angle is tight and gives you a nice focused spot (see picture) which is great for putting this through your diffusion of choice and have the light very controlled. Well done Luxli!
[I received this product in exchange for my honest review.]

5
08/08/2024

[40°] This cover fits the UH-1 nice and snug on this CMMG MK47 Banshee 200, has ample neoprene thickness for potential dings or bams, and is quick to remove. Do note that if you have a magnifier, one extra picatinny notch will be used for magnifier-to-scope distance for end of cover thickness. Also, removing the cover requires the magnifier to be swung out of the way.

On the PTR9ct, this Vortex Optics AMG UH-1 Gen II Holographic Sight Sure Fit Neoprene Cover also fits the Spitfire, TO A DEGREE. Without the factory supplied snap-up end caps, the cover is loose enough to potentially come off with a slightly less than moderate snag. However, with the end caps affixed, the Spitfire is as snug-as-a-bug-in-a-rug within the cover. I recommend placing the pull loop to the rear to reduce cap ejection.

As the material at the ends of the Cover are reinforced, with what I would guess is cardboard, I plan on sewing, or even better, gluing a piece of neoprene onto the inside of the ends to better wrap around the Spitfire without the end caps.

Now I have two!

5
06/08/2024

[40°] This light grade is a must have for the Broncolor 150 octopus.

5
02/08/2024

[40°] I've been waiting for a long time for these grids to be made. And for lighting control, they are ABSOLUTELY INDISPENSABLE!!! And the price is way too low for what it is. Most grids of this type, easily cost 3 to 4 times the price. Grids are expensive. This one, is not.

I tell you... the quality of this grid is incredible. You'll see and feel when you get yours. Everything feels sturdy. When you remove it out of the included pouch, it pops up like one of those collapsible background discs. The whole thing just feels great to touch too. Yes, I'm that happy and excited! Waited too long for a custom grid for the Taiko and they are here!

When installed and used correctly, the grid will do the job perfectly.

Of course everyone knows how to install a grid. It's a simple job and it takes seconds. But I have included several pictures and also some containing instructional images attached to this review.

The provided images I uploaded, they can be actually useful to you, or at least on how NOT to damage the grid and its Velcro attachments , or the best way to install anyway...and BTW, like any other grid, never pick up the grid from the square grids or install touching the grids. Like any grid, only handle from the outer frame!

Well, it's a grid. What else can I say? ...

Bottom line:
Extremely high quality from the rigid, springy frame, comes included with a pouch, does the job like a professional grid should, installs and removes in seconds.

I'm very pleased with this item. The long wait is over! More fun with my Taiko!!!

[I have received this product in exchange for my honest review]

5
19/07/2024

[40°] Fits over the first gen vortex UH-1 nicely and keeps it free of dust and other debris. Its a squeeze and doesn't cover the flip up micro 3x magnifier but then again I don't believe it was designed too.
Would buy again

5
03/07/2024

[40°] Its just great, not floppy like other grids, but pops into place and attaches quickly and securely to the light. It folds up, not tiny but pretty compact. Nice bag.

5
22/06/2024

[40°] Good quality,
Lightweight,
easy to install,

5
09/06/2024

[40°] Easy to get on and off scope, neoprene material helps keep your scope dry and dust free

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Nila Holographic Lens For Arina 400 (40°)

$291.00 $360.84

Boxer Led Light Nila Yoke

$831.00 $1,254.81

Nila Boxer Daylight Led Fixture Kit

$5,997.00 $9,055.47

Nila Boxer Daylight Led Fixture - No Accessories

$4,797.00 $7,675.20

Countryman A3 Cardioid Podium Microphone 18"

$2,249.97 $3,262.46

Products You May Like

Lupo Movielight 300 Pro Pole-operated Yoke

$4,101.00 $5,249.28

Eliminator Lighting Mirror Ball 20 Inch

$509.97 $678.26

Mac Pro Kit With Applecare+ M2 Ultra Rackmount

$25,193.85 $36,279.14

Smallhd Cine 7 Monitor With Bolt 6 Tx Kit

$13,992.00 $21,547.68

Cambium 60w Poe Injector 56vdc

$89.97 $108.86

Midas Dl8 Poe 8x8 Stage Box Pro Preamps

$1,797.00 $2,192.34

Sigma 20mm T1.5 Ff Prime Lens Canon Ef Feet

$8,397.60 $10,580.98