The 24" A3 (Omnidirectional) from Countryman is a podium condenser microphone designed to provide clear voice reproduction for use in meetings, conventions, lectures, and houses of worship. It features dual capsules tuned for clarity, wide frequency response, low noise, and a high maximum SPL of approximately 130 dB.

Integrated damping, along with the dual-cartridge design, attenuates thumps, rumble, vibration, and handling noise. The mic’s shielding and circuit design protect it from picking up interference from radio frequencies. The supplied windscreen reduces the level of breaths and plosives.

A standard XLR 3-pin male connector allows you to connect it to most mixers and mic preamps. The A3 is powered by 48 VDC phantom power. A protective case is included.

Omnidirectional Polar Pattern    For Tables, Lectures, Houses of Worship    Wide Frequency Response    Dual Capsules Tuned for Clarity    Low Noise, High Maximum SPL    Vibration Cancellation    RF Immunity    Requires 48V Phantom Power    XLR Connector    Includes Case and Windscreen

The omnidirectional polar pattern picks up sound equally from all directions, which is well-suited for group settings and ensembles

Each dual-capsule A3 is individually fine-tuned for clarity, low noise, and high overload without distortion

60 Hz to 18 kHz frequency response

The dual-cartridge design, combined with integrated damping, cancels thumps and handling noise

Rigorous shielding and circuit design protect the mic from radio frequency interference, including wireless devices and cell phones

A multistage wind-noise-reduction approach acoustically and electrically tames pops and breath noise

Related Questions and Answers

Q: 1. would this work with zoom h1

A: Yes I just bought this along with a Zoom H1 and it works great.

Q: 2. How long is the cable?

A: 6 foot long from mike to plug tip. Hope this helpsJack

Q: 3. Is this one compatible with DJI MIC 2 (2nd gen)?

A: Yes, the Hollyland LARK MAX HL-OLM02 Omnidirectional Lavalier Microphone is compatible for use with the DJI Mic 2 Compact Digital Wireless Microphone System. DJI also offers the DJI Lavalier Microphone for Mic 2 (B&H # DJLAVMIC), which is available in stock.

Q: 4. Is it compatible with Tascam DR-40? If "yes", what adapter I have to use?

A: Yes, you can use the MM-ML with the Tascam DR-40. Use a Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H #ROVXLRP) to convert the mic's 3.5mm plug to XLR as well as to convert 48V phantom power from the recorder into low voltage plug-in power suitable for the microphone.

Q: 5. Does it work with wireless equipment? Sennheiser G3/Rodelink, etc?

A: This lavalier mic does have a 3,.5mm connection,.and it will work well with the Rode Wirelss Go system. But be aware that the Sennheiser systems as well as the Rodelink systems require a locking 3.5mm connection, so this mic may not make a secure connection and can easily pop out with those transmitters.

Q: 6. Hello, if we get this mic, do i need anything more to install it on a table?

A: I installed it in a podium. I had to drill a hole to install the insert for the mic and ran the cable underneath. The mic then plugs into the cable when you put it in the holder.

Q: 7. Will this mic work in a House of Worship?

A: The Senal MXBM-621/O MX Series Condenser Boundary Microphone will function the same regardless of the type of building it is used in. All it requires is an XLR mic input which can provide phantom power.

Q: 8. What is the max width and or length quadcopter frame that this unit can be used on.

A: Hello Robin and thanks for your question. We have primarily tested the A3 Pro Flight Control System with the Spreading Wings (B&H # DJS1000P) and DJI M600 (B&H # DJM600, B&H # DJMAT600PRO) series of aircraft. The approximate dimensions of the M600 series are 1668 mm x 1518 mm x 759 mm (propellers, frame arms and GPS mount unfolded) and the maximum takeoff weight is approximately 15.5kg. Hence, aircraft frames that fit within these dimensions and criteria will certainly be compatible. Larger frames should also be compatible, however we have not tested such configurations. Thanks!

Q: 9. Does this scanner handle film scanning in 35mm, 120, 4x5 and 8x10 sizes?

A: This item is an accessory for a scanner that only scans documents. If you are looking for a scanner that handles up to and including 8x10 film, I would recommend the Epson scanners. You can click on the link below to view your options; https://bhpho.to/2m64rOG

Q: 10. Can you remove the foam tip?

A: Yes, the foam windscreen on the Hollyland LARK MAX HL-OLM02 Omnidirectional Lavalier Microphone is removable.