The 12" A3 (Selectable Cardioid/Hypercardioid/Omnidirectional) from Countryman is a podium condenser microphone designed to provide clear voice reproduction for use in meetings, conventions, lectures, and houses of worship. It features dual capsules tuned for clarity, wide frequency response, low noise, and a high maximum SPL of approximately 130 dB.

Integrated damping, along with the dual-cartridge design, attenuates thumps, rumble, vibration, and handling noise. The mic’s shielding and circuit design protect it from picking up interference from radio frequencies. The supplied windscreen reduces the level of breaths and plosives.

A standard XLR 3-pin male connector allows you to connect it to most mixers and mic preamps. The A3 is powered by 48 VDC phantom power. A protective case is included.

Three Selectable Polar Patterns    For Tables, Lectures, Houses of Worship    Wide Frequency Response    Dual Capsules Tuned for Clarity    Low Noise, High Maximum SPL    Vibration Cancellation    RF Immunity    Requires 48V Phantom Power    XLR Connector    Includes Case and Windscreen

The selectable cardioid/hypercardioid/omnidirectional polar pattern provides versatility for single- and multi-source situations

Each dual-capsule A3 is individually fine-tuned for clarity, low noise, and high overload without distortion

70 Hz to 16 kHz (directional), 60 Hz to 18 kHz (omnidirectional) frequency response

The dual-cartridge design, combined with integrated damping, cancels thumps and handling noise

Rigorous shielding and circuit design protect the mic from radio frequency interference, including wireless devices and cell phones

A multistage wind-noise-reduction approach acoustically and electrically tames pops and breath noise

Related Questions and Answers

Q: 1. Will this mic work in the Canon 70D dslr?

A: Yes, this mic will work with the 70d.

Q: 2. Will this work with a UWMIC10 reciver?

A: No, the Saramonic Vlink2 HU Cardioid Handheld Microphone Transmitter for Vlink2 System (2.4 GHz) is not compatible for use with any of the Saramonic UwMic wireless microphone systems and is intended for use with the Vlink2 Wireless Microphone System. There is no UwMic10 series, but there are UwMic9 and UwMic9S series wireless mic systems which operate on the UHF band. The Vlink series components operate on the 2.4 GHz band which is not compatible with the UHF band used by the UwMic9 and UwMic9S components.

Q: 3. I want to use this microphone with a wireless pack to record in stereo. Will it plug in to a wireless pack or does it need to plug in directly to the recording device?

A: This can work with some wireless systems. Please contact us at 800-606-6969, via live chat, or at audio@bhphoto.com so we can further discuss what you are trying to record, and help you find the best solution.

Q: 4. the clip was the wrong size. which clip I need and why my microphone cover is wrong too

A: The clip is just very tight but it does fit. just be careful not to damage the cable. great microphone.

Q: 5. Would this mic work for people sitting 4 or 5 feet away? Any idea of the distance this could cover?

A: Yes, the MXBM-621/O can capture audio from people speaking who are 4 to 5 feet apart. The distance for coverage will vary depending on the environment where the mic is being used. The omnidirectional pattern picks up sound from 360 degrees and works best in quiet environments. Mics of this nature are often used for conferences and meetings. The mic is placed in the center of a table and picks up the voices of participants seated around the table.

Q: 6. In a larger area can multiple Omnidirectional mics be used without the mics be affected by signal interference with each other?

A: Unless you have some sort of physical separator like a barrier between the two microphones, you will not be able to keep the two MXBM-610/O Condenser microphones from picking up other sounds in the room as it is an Omnidirectional mic. A directional microphone would be much more appropriate for this kind of application if you are looking to cut down on bleed between mics.

Q: 7. would this work with zoom h1

A: Yes I just bought this along with a Zoom H1 and it works great.

Q: 8. Is this mic compatible with the Canon XA40?

A: Yes, the Senal MXBM-621/O is compatible for use with the Canon XA40.

Q: 9. will this work with Azden 310XT UHF On-Camera Plug-In System?

A: The Senal ENG-18RL as well as similar dynamic ENG mics are compatible and can be used with the Azden 310XT system.

Q: 10. When muted, is there a light indicator?

A: Yes, the mute on/off status of the Senal MXBM-621/O MX Series Condenser Boundary Microphone is indicated by a dedicated LED.