The compact loudspeaker LH2-UC06 is specifically designed for excellent sound reproduction in marine applications and other industrial environments. The units are rugged and resistant to the corrosive effects of seawater and industrial atmospheres. The horn loudspeaker is made from tough ABS material.

• Suitable for marine and industrial applications
• Tough ABS material

Related Questions and Answers

Q: 1. If you are using a Smallrig/ArcaSwiss cage on your camera, can you clamp to this head with the camera facing forward. Or do you need an accessory-type ArcaSwiss clamp to allow the camera to face forward with a Smallrig cage? I do not want to bolt a plate to the bottom of the cage

A: If you have a cage with a built in Arca Swiss plate it will mount on this head with the camera facing forward.

Q: 2. Can I start and stop video recording on my D800e with this?

A: Yes, if you assign the shutter button to start and stop video, then you can use the ML-3 to control video. Just go into the menu in CUSTOM SETTINGS of the camera and assign the shutter button.

Q: 3. Does the ball head tilt to 90 degrees?

A: Certainly! :)

Q: 4. There is two CH10 listed on the site: MFR# 3259 & 3259B. What is the difference?

A: The SmallRig CH10 Compact Fluid Head #3259B is a revision of the 3259 head that will be shipping soon. The main upgrades of the 3259B are the capability of using two screws in the QR plate. And what Smallrig calls an Anti-Lost pin is telescopic on the plate. Meaning it can be pushed in.

Q: 5. Will this remote work with the new Nikon D500?

A: The remote for the D500 is WR-R10 or WR-1. The ML-3 is for Nikon cameras with a 10 pin socket and will not work on the Nikon D500 according to the compatibility list in the product Overview . I hope this was helpful. MTucker Photography (Facebook)

Q: 6. What is the diameter of the threaded hole at the bottom of this head? 3/8"?

A: The video head has a 1/4 20" threaded hole on the bottom for mounting onto tripod legs and other support gear.

Q: 7. what does it take to mount this to an Olympus OMD !! ? J. Payne

A: To attach your Micro Four Thirds Camera to the Novoflex Universal Compact Bellows you will need 2 pieces. You will need the Novoflex A-Mount to BAL-F Adapter Ring linked here. https://bhpho.to/2V4jxFT. And you will need the Novoflex Short Lens Adapter for Novoflex A Mount to Micro Four Thirds Camera linked here. https://bhpho.to/3kECf1l

Q: 8. Does it have a bubble level?

A: The SmallRig CH10 Compact Fluid Head does not have a bubble level.

Q: 9. I have two older versions of this strap. the small buckles for adjusting the length were shiny metal . The adjustment buckles in the picture appear to be black. Are they now made of plastic?

A: Very strong plastic probably Nylon. The ends loop through O rings on the sides of th camera body, through the plastic loop then over and under the buckle. the strap will not slip when installed correctly.

Q: 10. How wide and how long is this strap?

A: This strap is 2 wide and the same length as the original one Nikon supplied with my D600. Difference is the extra width helps with spreading the camera/lens weight around my neck. I've purchased two, one for my other DSLR also.