Qsc Spa2-60 2-Channel Power Amplifier 60W

Qsc Spa2-60 2-channel Power Amplifier 60w

Product Code: eq180818
Availability: In Stock

$2,115.00 $3,341.70

Qty

7 reviews Write a review

Description
Reviews (7)

The highly flexible QSC SPA2-60 2-Channel Power Amplifier is an advanced Class-D amplifier with Energy Star rated efficiency well suited for smaller installations including meeting rooms or BGM zones. The convection cooled amplifier is designed to conserve energy. An auto-ramp circuit ensures quiet and fast power up from standby when a signal is present and seamless power-down following 25 minutes of inactivity, dramatically reducing power consumption.

The rear panel utilizes Euroblock connectors for inputs and outputs as well as remote inputs. Each channel of the SPA2 provides 60W of power, while the bridge mode provides 200W into 4 or 8 ohms and 250W into 70/100V.

Energy Star Qualified Class-D Topology 4 and 8 Ohms + 70/100V Operation Bridgeable Outputs for Higher Power Auto-Ramp Provides Quiet Power Up/Down Euroblock Input, Remote Input, Output Rack-Mountable 1 RU, 1/2 Rack Width Includes Rack Ears + Mounting Brackets Connector Pack and Power Cord Included

Key Specs
Number of Channels	2
Amplifier Power Rating	60 W per Channel 200 W Bridged
Load Impedance / Voltage	4 / 8 Ohms 70 / 100 V
Analog Audio I/O	1x Block 5-Pin Line Input 1x Block 5-Pin Remote Input 1x Block 4-Pin Speaker Output
Digital I/O	No
Network I/O	No
Rackmount Size	1 RU (with Included Hardware)
Amplifier
Number of Channels	2
Amplifier Power Rating	60 W per Channel 200 W Bridged
Amplifier Class	Class-D
Load Impedance / Voltage	4 / 8 Ohms 70 / 100 V
Performance
Frequency Response	20 Hz to 20 kHz ±0.1 dB (4 Ohms, 8 Ohms)
Input Sensitivity	1.23 V / +4 dBu
Input Impedance	>10 Kilohms (Balanced/Unbalanced)
Max Gain	25 dB (at 8 Ohms)
Max Input Level	+24 dBu / 12.3 V
SNR	> 100 dB
EQ	No
Filters	1x High-Pass: 80 Hz
Ducking/Muting	No
Connectivity
Analog Audio I/O	1x Block 5-Pin Line Input 1x Block 5-Pin Remote Input 1x Block 4-Pin Speaker Output
Digital I/O	No
Network I/O	No
USB I/O	No
Mobile App Compatible	No
Wireless	No
Power
AC Input Power	100 to 240 VAC, 50 / 60 Hz
AC Power Connector	1x IEC 15 A / NEMA 5-15
Physical
Display & Indicators	Front Panel: LED (Power/Protect/Signal) Rear Panel: LED (Limit/Protect/Signal, per Channel)
Rackmount Size	1 RU (with Included Hardware)
Cooling	Convection
Certifications	CE, ENERGY STAR, FCC, RoHS, UL, WEEE
Dimensions	9.5 x 1.8 x 8.7" / 241.3 x 45.7 x 221.0 mm
Weight	3.5 lb / 1.6 kg
Packaging Info
Package Weight	5.95 lb
Box Dimensions (LxWxH)	15.6 x 11.4 x 3.75"

Provides up to 60W per channel into Low-Z loads at 4 and 8 Ohms
Energy Star qualified SPA Series employ an efficient class-D design to conserve energy and reduce operational cost
Provides up to 250W by bridging the output
Rack-mountable 1 RU, half-rack width enclosure—the SPA Series can be mounted in 1 RU, 1/2 rack space, and their clever joining brackets enable easy under table and wall mounting

Related Questions and Answers

Q: 1. PTAU45 - What is the frequency response of this amp?

A: the frequency response, as listed in the owner's manual, is 20Hz-20kHz

Q: 2. Bass +__?__ dB / Treble +__?__ dB How many dB boost for the tone controls. Bass +10dB, +12dB, +15dB or what.?? WE need to know.

A: Sorry but can't help you. Mine broke within a year after I bought it. I had to go back to using my 25-year Radio Shack amp which still works same as when new.

Q: 3. can these two channels be bridged?

A: to the best of my knowledge, no. Basic 2 channel amp, but it does what it is supposed to do well with low distortion and dependable output levels. I used it for wired speakers on my patio, Bose, that are not that efficient, but it drives them well and cleanly. Hope this helps.

Q: 4. Can I connect my nextbook for better sound?

A: You can hook up any audio source with an auxillary cord. I've used phones, iPads, and IPods without an issue so I'm assuming your Nextbook would be similar.

Q: 5. What kind of mic do i need to use with this amp?

A: Use a dynamic type microphone: Example: Audio-Technica ATR1200 Cardioid Handheld Dynamic Microphone B&H # AUATR1200

Q: 6. Can a powered subwoofer be connected to the REC OUT jacks?

A: The REC OUT on the Pyle Pro can be used with a powered subwoofer, however the signal output from this set of jacks is not affected by the master volume. If you turn down the main volume, the incoming signal is still fed to the connected device (subwoofer).

Q: 7. I have an existing set of speakers going to my pool deck (Ch.2), and a set at the pool house (Ch.1). I'm looking to amplify the ones on the deck (Ch.2) so I have a balanced volume. Can I connect the existing speaker output (Ch.2) speaker to the input AUX. of this amplifier then run the speaker output from the amp to the pool deck and boost the volume?

A: Adjust the balance control.

Q: 8. Pyle Pro PTAU45 Mini 120 Watt x 2 Stereo Power Amplifier, can you plug in an iPod to the USB connection and listen to music, assuming you have speakers hooked up?

A: I never tried that because I have a Harmon Kardon BTA-10 Bluetooth receiver that I also bought at BH Photo connected to one of the Aux inputs. It works great and has an amazing receive distance. I got no strings on me!

Q: 9. What is the speaker Output ohms for a pyle pro ptau45 mini 120 watt?

A: This amp has a 4 ohm speaker output.

Q: 10. Can the USB port be used for a Bluetooth USB adapter to stream audio?

A: No, the USB port on the Pyle Pro PTAU45 Mini Stereo Power Amplifier cannot be used to connect a Bluetooth USB adapter, however, you can use a Bluetooth adapter with a standard analog audio plug to connect to the RCA aux inputs or the 3.5mm CD/MP3 input. The Aluratek iStream DockFree Bluetooth Audio Receiver (B&H # ALAIS01F) could be a good option for a Bluetooth adapter. It has a 3.5mm plug and comes with an RCA adapter.

Brian	08/09/2024
[Class-D] My previous amp ran the fans from front to rear, but I prefer the way this amp blows from rear (inside the rack) to front. The RMX 850a has standard balanced input connectors, and multiple output connectors including advanced SpeakON. It's easy to configure for bridging, limiting, filtering, or other standard options. 5

Daniel	22/08/2024
[2] Product shipped quickly. Ordering was a breeze...website very intuitive. And amplifier worked the second I plugged it in. Very smooth process. 5

Frank	11/08/2024
[2] A small, light, quiet, transparent amplifier with 4 channels (2 stereo pair for me) to solve a problem in my home studio. I drive a pair of Yamaha NS-10M and a pair of UREI 809s (yeah, old school) and use the volume controls to switch between them when monitoring my work. Plenty of power for my control room (remember, it's a home installation). A little pricey but I trust QSC and they delivered. They worked as advertised, the documentation was great, no problems. I did consider ditching the speakers and getting a pair of powered monitors, but I am used to listening to these and they haven't let me down yet. 5

Michael	13/05/2024
[> 100 dB] We are using this 2-channel amplifier to power 4 subwoofers wired in parallel, as the specs explicitly show support for our expected low-impedance setup and expected wattage. Note the unit is 3 RUs tall, make sure there is enough space in the rack if replacing an expired amplifier. The standard NEMA 5-15P (15 amp power plug) removable IEC included allowed for easy integration within our existing rack PDU setup. The simple, tried-and-true analog input wiring and dip switches were easy to integrate with our DSP, set preferred mode and filters. The physical power switch on the front is nice for our use case. The front dial appears to operate by digitally switching between gain steps, rather than a smooth analog potentiometer with physical start and stop limits. Not an issue for us but worth noting. We were impressed with the power output this amp is capable of, allowing us to drive the connected subwoofers at higher power levels than the previous amp could achieve given our low-impedance setup. For the sake of intelligibility, we dialed everything back enough to make our desired sub shake felt-not-heard but balanced with the meeting space's intended audio sources. 5

Willie	26/04/2024
[2] Get one 5

anyonymous	30/11/-0001
[Convection] I've used the older model of this for about 12 years now for a theater that specializes in plays. They've lasted forever and I was replacing an older crown model that had an amp channel go out. This model has great gain with low noise coming off of our Ls9. Highly recommend it. 5