Keep your servers, routers, switches, and other business-critical applications running during a power outage with the APC Smart-UPS X 2000VA Rack/Tower with Network Cardfrom APC. Capable of up to 1800W of power output, the SMX2000LVNC comes equipped with six NEMA 5-15R outlets, one NEMA L5-20R outlet, and three NEMA 5-20R outlets.

With a three-hour recharge time, the SMX2000LVNC comes with audible alarms to warn you of changing power conditions. The cold start-capable UPS also boasts a pre-installed network card, hot-swappable batteries, and a $150000 lifetime equipment protection policy.

Output: 1800W / 2000VA    Input: 120V    6 x NEMA 5-15R Outlets    1 x NEMA L5-20R Outlet    3 x NEMA 5-20R Outlets    Recharge Time: 3 Hours    Pre-Installed Network Card    Audible Alarms    Cold-Start/Hot-Swappable Batteries    $150000 Equipment Protection Policy

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Enables communications with SMX, SMT, SRT, and SURTD Smart-UPS models using historical APC proprietary USB usages.

Provides notification of changing utility power and UPS power conditions.

UPS recognizes when external battery packs are attached and automatically adjusts runtime.

Automatically starts up the connected equipment upon the return of utility power.

Periodic battery self-test helps to ensure early detection of a battery that needs to be replaced.

Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Helps to eliminate voltage fluctuations as a source of AV signal degradation and component power-supply stress.

Provides temporary battery power when the utility power is out.

Warns when a battery is not available to provide backup power.

Provides actual kilowatt hours of usage for energy conscious users.

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.

Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.

Reduces utility costs, generates less heat.

Helps to ensure clean, uninterrupted power to protected equipment while batteries are being replaced.

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Designed to provide clear and accurate information in multiple languages with the ability to configure the UPS locally. Equipped with easy-to-use navigation keys.

Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime.

Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

Provides proactive notifications of changing power or unit conditions and provides the user the ability to remotely control PMU functions.

Turn on/off, reboot, or shut down select outlet groups to save dispatching technicians to remote locations.

Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.

Provides early-warning fault analysis ensuring proactive component replacement.

Dynamically provides the month and year when battery replacement is recommended.

Provides for remote management and control of the UPS over a network out of the box.

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Allows additional run time to be quickly added as needed.

Customize network shutdown and reboot sequence of connected servers and UPSs.

Use any Home Automation network to monitor and control the S20 through its RS-232 serial port.

Enables centralized management via StruxureWare Data Center Expert.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Provides management of the UPS via a USB port.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, which helps to reduce Mean Time to Repair (MTTR).

Enables a quick recovery from overload events.

Helps to protect connected loads from surges, spikes, lightning, and other power disturbances.

Quickly understand unit and power status with visual indicators.

Related Questions and Answers

Q: 1. Does it have a screaming alarm when the power goes out?

A: During a blackout, the CyberPower CP1000PFCLCD PFC Sinewave UPS System has an alarm that will sound—two short beeps, followed by a pause. However, this sound can be muted if needed.

Q: 2. What is the run time at 50% load?

A: Run time at half load is about 9 minutes.

Q: 3. FOR HOW LONG WILL STILL WORK AFTER POWER OFF?

A: The amount of time the UPS will provide power to your equipment is entirely dependent on what is connected to it and how much power it is using.

Q: 4. How long can it power a router and modem for if the power goes out?

A: This unit is rated for a full load runtime of 3 minutes and a half load runtime of 9 minutes. It would depend on the power draw of the items you had attached to the UPS.

Q: 5. Does this have the two front usb charge ports (type-c and type-a) 3.1A?

A: No, unfortunately this item would not contain any front facing USB type-c, and type-a ports.

Q: 6. Will this be enough for an imac m1 and a lacie d2 hardrive?

A: The BH #CYCP1000PFCL has a 8 minutes at half load rating. Based on the M1 iMacs power draw this should put you in that range of run time.

Q: 7. Will this be sufficient to power a 16 core 2019 Mac Pro 7,1?

A: Assuming a power load of about 400 Watts for the computer and one monitor, this CyberPower 1500 VA Smart App LCD UPS would run for about 30 minutes. (calculator: https://bit.ly/3Rn2G8S).

Q: 8. I am installing this on a flyback but the courier service is asking if this is TSA compliant? Is it?

A: For questions regarding transporting the CyberPower OR1500LCDRT2U Smart App Intelligent LCD Equipped Uninterrupted Power Supply, please contact CyberPower directly for help.

Q: 9. Will this work with Mac OS X, like the CyberPower Rackmount CPS1500AVR?

A: Not at this time. The PowerPanel power management software has been fully tested and is compatible with Windows 8 32/64, Windows 7 32/64, Vista 32/64, XP 32/64, 2000, 2003, Server 2008 and Server 2012.

Q: 10. Will this work with Mac OS X, like the CPS1500AVR?

A: I assume you are asking if the UPS software will shut down your MAC if the power fails? You will have to go on line to the units mfg. and read an owners manual. I bought my unit to retain power to my computers if the power failed. When I am doing a video render, I don't want my computer shut down until I am ready. My experience: It performed well during a 3 hour power outage. I would recommend this unit for its intended purpose. Walt Copeland, A/V Engineer