Hprc Pha4-2700W Hard Case For Dji Phantom 4 Series

Hprc Pha4-2700w Hard Case For Dji Phantom 4 Series

Product Code: eq180957
Availability: In Stock

$795.30 $986.17

Qty

6 reviews Write a review

Description
Reviews (6)

The HPRC PHA4-2700W Hard Case for DJI Phantom 4 Seriesis a watertight hard case from HPRC PHA4-2700W Hard Case for DJI Phantom 4 Seriesthat features a pre-cut foam interior to fit the DJI Phantom 4 Quadcopter with a tablet, up to five spare batteries, the radio controller, two sets of spare propellers, tools, cables, and more. It is impact and drop resistant, corrosion resistant, and features a neoprene seal that, when properly closed, is designed to keep the case watertight and your Phantom protected, even if it's submerged in shallow water. A release valve allows you to equalize air pressure when traveling between different elevations.

The foam interior can be removed and will fit in the PH4-BACKPACK (available separately), for a lightweight, highly mobile solution.

Hold Phantom 4 with Propellers Attached Hold Transmitter (Radio Controller) Hold Tablet up to 10" Hold up to Five Spare Flight Batteries Hold Two Spare Propeller Sets Hold Three Filters Hold Tools, Cables, and More Watertight Hardshell Exterior Wheeled Design with Retractable Handle Works with Optional PH4-BACKPACK

Parameters
Interior Dimensions	Overall: 21.85 x 18.1 x 10.08" / 555 x 460 x 256 mm Lid: 1.81" / 46 mm Bottom: 8.27" / 210 mm
Temperature	-40 to 176°F / -40 to 80°C
Exterior Dimensions	24.41 x 20.67 x 11.02" / 620 x 525 x 280 mm
Weight	19.22 lb / 8.72 kg
Packaging Info
Package Weight	20.6 lb
Box Dimensions (LxWxH)	24 x 21.5 x 11"

The Phantom fits fully recessed in the foam for maximum protection

Propellers stay on when storing in the case

One main central handle plus two side handles for easy carrying

Wheeled design with retractable handle

Related Questions and Answers

Q: 1. Will this case fit a P3P with a gimbal guard attached between the landing gears?

A: Anything that will fit within the inside parameters of the landing gear (LxHxW) should fit in the case.

Q: 2. Hi... Will this work with a SONY FDR-AX53? Thanks

A: The Ronin-S is designed for Mirrorless and DSLR cameras. However it may be able to balance a smaller camcorder like the Sony AX53 as well. You will need to test it out to see the results and you may not have full range of movement and performance when using a camcorder instead of a Photo Camera.

Q: 3. Is the canon 80d supported?

A: Yes it is! :)

Q: 4. What is the difference from the Ronin S and the Ronin S essentials?

A: The Essentials Kit is missing a number of accessories included with the standard kit. Below is a list of what is included with the standard DJI Ronin-S. If an item is not included with the Essentials Kit I indicated it next to the item. DJI Ronin-S BG37 Grip with Built-In Battery Camera Mounting Plate Focus Wheel - Not Included with Essentials RSS IR Control Cable - Not Included with Essentials USB-C Camera Control Cable - Not Included with Essentials USB Micro-B Camera Control Cable- Not Included with Essentials USB Type-C Cable Lens Support Camera Riser Extended Grip/Tripod Made of Metal - Tripod Made of Plastic with Essentials Kit 24W USB Power Supply - - Not Included with Essentials Accessory Box - Not Included with Essentials Hex Key Touch Fastener Strap for Cable Touch Fastener Strap for Gimbal Storage Case Limited 1-Year Warranty on Gimbal Limited 6-Month Warranty on Motors

Q: 5. Will this gimbal work with sony z 90?

A: The Ronin-S has an 8 pound load capacity and a slanted back motor. You should be able to balance a camcorder like the Z90 on this gimbal. You may need to remove the XLR top handle from the Z90 for it to balance and may have a limited range of motion when compared to using a Mirrorless or DSLR camera on the gimbal.

Q: 6. Will this case fit a Ronin 4D with all the expansion modules attached? Wireless transmitter and audio modules attached.

A: The HPRC R4D-2730W-01 Case for DJI Ronin 4D-6K Combo (Black) can fit the DJI Ronin 4D with the transmitter attached. As for the audio modules may or may not have to be removed depending on the audio modules in use.

Q: 7. Hi. Is there a way to attach a wireless follow focus to this gimbal?

A: I do not recommend it for the balance

Q: 8. Will this also fit Phantom 4?

A: Hi, no for the Phantom 4 it is a different foam insert. This one is for the Phantom 4 - HPRC PHA4W Combo with Wheeled Hard Case, Backpack, and Foam for DJI Phantom 4 / Phantom 4 Pro / Phantom 4 Pro+ BH #HP2700WPHA4C - https://www.bhphotovideo.com/c/product/1246801-REG/hprc_hprc2700wpha4combo_backpack_and_2700w_hard.html. Thank you for shopping at B&H!

Q: 9. Does the standard kit include focus and zoom controls for sony a6500?

A: It does not. This kit does not include the DJI Ronin-S Multi-Camera Control Cable (Sony Multi Port), B&H # DJRONINP13CB, required to control the A6500. Please keep in mind that Sony cameras do not allow for electronic manual pulling of focus, you will not be able to control focus in that way with the A6500 even with this cable. https://bhpho.to/2DZF5sE

Q: 10. Does the case come in another color? I own a yellow camera case. Id like to purchase another more feminine color. Thanks

A: This case is not available in a choice of colors.

Jorge	25/08/2024
[20.6 lb] Love this case, everything just fits lol, iPad, 4 batteries, extra propellers, 3ND filters, just amazing! Can't forget to mention the wheels on this case ride great 5

Kenneth	18/08/2024
[24 x 21.5 x 11"] Great cases. Everything fits. Plenty of space. Very professional in appearance. Highly recommended. I will purchase this company's cases for all of my future drones. That's why I purchased two at one time. 5

anyonymous	16/07/2024
[24 x 21.5 x 11"] I recently purchased a DJI Phantom 4 Pro for my company and needed a good case in which to transport the equipment safely. I wanted a tough case with precut foam cushioning specifically designed for the P4P and associated accessories as well as other design features that would allow me to use the case for easy travel or even for shipping purposes. This case features pre-cut spots for the Phantom 4 Pro, controller, multiple batteries (4+, depending on how you arrange things), the DJI charger, mobile device (I'm using an iPad Mini 4), a few articles of paperwork/manuals, spare propellers and a sunshade. There are even pre-cut spots for camera lens filters, if you need them. The overall case design is similar to Pelican brand cases and, so far, seems just as tough. The lid latches are heavy-duty, there are carry handles all around it and it even has an extendable handle and wheels so you can roll it around like a piece of luggage. Very handy. I would recommend this case to anyone who needs a professional and reliable transportation solution for their P4P and accessories. 5

Jim	21/06/2024
[24 x 21.5 x 11"] This case was worth the wait! Well constructed and thought out. Not a huge investment to protect $4,000 worth of gear. 5