Set up and configure your IP camera using the POINTSOURCE Plus Battery Powered PoE Injector by Veracityfrom Veracity. Connect the device to your network camera using an RJ45 PoE connector and locally view the camera's field of view from your laptop. Once connected, the PoE injector will also allow you to capture snapshots or video clips of scenes while on site. With this information, you can then adjust your camera's alignment, focus, and field of view, all from the PoE injector.

This PoE injector is powered by a removable, rechargeable battery which can supply the device with enough power for a full day of work. Furthermore, you can rapidly swap the battery with additional spare batteries (available separately) for continued power, and the original battery can be charged while a second battery is powering the PoE injector for constant use. The injector also features a USB port for powering other devices, such as a tablet or smartphone, while on the job. Additionally, the device uses LED indicators to let you know the status of your PoE, battery, and network connections.

You can also pair the PoE injector with an IP camera that has integrated storage for a temporary surveillance recording system.

Assists with Network Camera Installation    PoE and PoE+ 48 VDC Power Output    5 VDC USB Power Output    Locally View IP Camera from Your Laptop    Adjust Camera Alignment, Focus, and FOV    Snapshots & Video Clips of On-Site Scene    Includes 5W Rechargeable Battery    PoE, Battery, & Network LED Indicators    2 x RJ45 Ports, 1 with PoE    IEEE 802.3af and 802.3at Compliant

Assists with IP camera setup using snapshots or video clips of on-site scenes

Allows local viewing of an IP camera from your laptop

Enables rapid, precise adjustment of camera alignment, focus, and field of view

Includes USB power port for charging phones and tablets

PoE port LED indicates when PoE is being delivered

Includes removable, rechargeable battery with a 3- to-5 year lifespan

Battery status indicator with 100%, 75%, 50%, and 25% charging steps

Charge one battery while the POINTSOURCE Plus runs on a second battery (available separately)

Supports all classes of 802.3af and 802.3at PoE devices

Installs and packs up in seconds and reduces on-site time

Rapidly swap spare batteries (available separately) for additional power

Compact design with a shoulder strap for hands-free field use

Pair the POINTSOURCE Plus with an IP camera that has storage for a temporary surveillance recording system

Related Questions and Answers

Q: 1. Hi,will this interfit badger battery powered flash head work with godox Xi pro transceiver for nikon systems?

A: This flash has a different radio system than the Godox. If you want to use it with Godox you would need a receiver, and you would give up all control. It would be better to get the Interfit controller for it.

Q: 2. Is the wireless receiver compatible with Pocket Wizard Transceivers?

A: Rather than using the Badger Unleashed's built-in proprietary receiver, you'll use a Pocket Wizard as a receiver and plug it into the Badger Unleashed's 3.5mm sync port. To be clear, any wireless transmitter and receiver set (e.g. Vello, Godox, Yongnuo, etc.) with a sync port output could be used in that way, too. The advantage to using Interfit's own remotes is that the Interfit remote will also give you control over the flash intensity from the transmitter. (Of course, you can always push the buttons on the strobe to adjust intensity otherwise.) To locate an Interfit proprietary radio transmitter (which they call a "remote") for this strobe, please click the [ACCESSORIES] button below and then [Radio Triggers & Receivers ]. If one isn't listed for your camera brand (e.g. Fujifilm or Panasonic) then choose the manual remote for all cameras (B&H #INTR1B), which will still allow for control over the flash intensity from the transmitter.

Q: 3. Are you able to attach an umbrella to the mount?

A: Yes, there is an umbrella mount built into the light stand mount. It can hold either 7mm or 8mm umbrella shafts and holds it in place via a tension rod (no thumb screws).

Q: 4. Is this enough to light a 120 x 180 cm Softbox?

A: Yes. More than enough power to illuminate a 120x180 cm.

Q: 5. What cable would I require to connect this flash to a PC Sync Copal Shutter?

A: You need to get a 3.5mm to standard pc cable - Impact Sync Cord Male Mini (3.5mm) to Male PC (16') BH #IMMMPCM16

Q: 6. Can this be used with a Interfit S1N AC/DC HSS TTL Monolight?

A: Being that this monolight uses the same radio trigger system as the S1N, they can be used together.

Q: 7. Does this light come with a softbox like the Honey Badger?

A: It does not come with a softbox, but you can get one here https://bhpho.to/2NTEfl4.

Q: 8. Can I connect a PocketWizard to this?

A: Yes. The Siros L has a sync port which can be triggered by a plugged in receiver.

Q: 9. is it possible to charge it and use it at the same time?

A: No it is not possible. Simultaneously charging and discharging the battery shortens the lifespan of the battery, which is why we do not include this feature. Spare batteries are available for a very reasonable cost.

Q: 10. Are these 'made in China'?

A: The Interfit Badger Unleashed is made in China.