Intellytech V-Mount Gold Mount Battery Converter Plate

Intellytech V-mount Gold Mount Battery Converter Plate

Product Code: eq181087
Availability: In Stock

$297.00 $448.47

Qty

11 reviews Write a review

Description
Reviews (11)

This Intellytech V-Mount Gold Mount Battery Converter Platefrom Intellytech V-Mount Gold Mount Battery Converter Plateallows you to use a V-mount battery on a camera or light that has a Gold Mount plate. The converter plate also has one D-Tap output to power additional accessories.

Use V-Mount Battery on Gold Mount Plate 1 x D-Tap Accessory Output

General
Mount	V-Mount to Gold Mount
Packaging Info
Package Weight	0.75 lb
Box Dimensions (LxWxH)	6.1 x 3.85 x 1.55"

Related Questions and Answers

Q: 1. What is the spacing on the rod mounts? can it be mounted to rods on a baseplate?

A: Battery Plate for Sony FX6 Type II mounts via 15mm LWS rods. If your baseplate uses 15mm rods, then it will be able to mount to it.

Q: 2. Which parts are metal (if any) and which parts are plastic on this plate? Trying to decide between this and the SWIT adapter.

A: The SHAPE Gold Mount to V-Mount Regulated Battery Converter is entirely made from plastics, except the metal connectors.

Q: 3. What is the max output capacity / load in watts and in amps?

A: Roughly 300-310 watts

Q: 4. I'd like to run gold mount power to a remote FX6. Is there a DC extender cable that would work w this unit?

A: The Tilta Battery Plate for Sony FX6 Type II (Gold Mount) (B&H# TIST20BTP2AB) could be part of a solution to power a Sony FX6 even if it's not mounted within just a few inches of the camera. It features a female D tap port (14.4V) and if combined with a cable like the IndiPRO Tools Regulated D-Tap to DC Barrel Power Cable for Sony PXW-FX9 (36") (B&H# INDTSFX9) then you could position it up to a few feet away (about 0.9m): https://bhpho.to/33ZMffQ

Q: 5. will this worked flipped around? I.e. with the rods on the bottom instead of above.

A: While it is possible to mount the Tilta Battery Plate for Sony FX6 Type II (Gold Mount) with the 15mm rods on the bottom, the DC plug would be on the wrong side of the camera and may not reach the DC input on the camera.

Q: 6. Would this work on the RED V-Raptor?

A: Yes the SHAPE Gold Mount to V-Mount Regulated Battery Converter would work and convert any V-mount camera to Anton Bauer Gold mount.

Q: 7. Does this attach to an npf battery slot?

A: The Tilta Battery Plate for DJI Remote Monitor attaches to DJI's proprietary batty type on the back of the high bright monitor.

Q: 8. What are the inner and outer barrel diameters of the DC outputs?

A: There are no barrel outputs on this device; only d-tap and those are all standard.

Q: 9. Hi!!! Do you know for sure if this battery can be charged with an D Tap charger like the IndiPRO Tools D-Tap Pro Battery Charger ?(16.8V, 2.5A). Need to check before buying. Thanks!!!

A: Yes Intellytech makes a D-Tap charger for it. https://bhpho.to/360VMC3

Q: 10. Is this a pass through power NP style connector? Can it be used to upgrade any np mount? Would like to use this to adapt power.

A: The Tilta Battery Plate for DJI Remote Monitor (Gold Mount) does use the DJI Remote Monitor's NP-F battery plate for power pass through, and partially for mounting, but the issue when attempting to use it with other products with NP-F power ports would be the mounting part, as this plate is also designed to line up with the DJI High Bright Remote monitor's cage, where it would be screwed into place using a 1/4"-20 screw. If you were to use this plate with other devices it would mount into the NP-F battery receiver, but it wouldn't have the 1/4"-20 connection to help support the weight of the heavier batteries, and could cause damage to the device's NP-F receiver. So it isn't really advisable to use the Tilta Battery Plate for DJI Remote Monitor (Gold Mount) with other devices.

Mark	27/08/2024
[0.75 lb] Needed a way to power my bolt 6 transmitter without being tethered to a cord. Mounted the bolt 6 to a mic stand and used the adapter to mount the battery to the mic stand and connected with the DTap. Works perfectly. 5

David	29/07/2024
[0.75 lb] Bought this because it was cheaper than the Anton Bauer version by a landslide. I was pretty impressed with its built quality. Very comparable to the competitor. Also a little bit smaller too, which is nice. I ordered a second one shortly after the first one came in the mail. 5

Nicholas	19/06/2024
[0.75 lb] Swx clamp goes for $275 same product for a fraction of the cost. 5

Brandon	12/06/2024
[0.75 lb] Very sturdy feeling, even though it is made of mostly plastic. Not wiggle room, and doesnt lose power when bumped like some adapters can. 5

Michael	23/05/2024
[0.75 lb] Purchased 2 of these to run 14v Anton Bauer batteries on the Fiilex G3 lights. They work great! 5

Humberto	29/04/2024
[0.75 lb] This plate converter is extraordinary, easy install, well done and excellent price 5

L	22/04/2024
[0.75 lb] I tested this with my Forza 300B and 60B Nanlites, and it allows me to use (longer lasting) Gold Mount batteries instead V-Mount. I know that this converter works, although I have not used extensively or for super long periods of time. 5

Evan	19/04/2024
[0.75 lb] Works exactly as shown. 5

John	05/04/2024
[0.75 lb] Delivered quickly and they work great! Very happy! 5

Stephen	30/11/-0001
[0.75 lb] Own both Gold to V, and V to Gold mount converters. These have saved me multiple times when we’ve needed to switch out batteries with the other mount on a shoot. Small/light weight and a solid build 5