The Ikan Rayden 1x1 Daylight 5600 LED Light Kitfrom Ikan Rayden 1x1 Daylight 5600 LED Light Kitis built into a heavy-duty molded plastic chassis providing a lightweight yet strong fixture with enhanced features such as 100-10% flicker-free dimming, LCD display, and an included wireless remote. It produces a 50° beam spread and the barndoors feature integrated gel clips.

The fixture is DC powered, incorporating a 4-pin XLR connector and including an AC/DC power supply for mains power. Interchangeable Gold and V-Mount plates are included so no worrying about getting the fixture that matches your battery system. The four-leaf barndoors provide control over light spill, and feature removable light intensifiers to suit your taste. The yoke is angled forward 30°, which allows you to open the barndoors all the way without hitting the yoke when the light is pointed straight forward. The yoke has a combo Baby pin/Junior stud so you can mount it on a stand or hang it from a grid with optional clamps.

2 x Rayden RW10 Fixtures    2 x Gold Mount Battery Plates    2 x V-Mount Battery Plates    2 x Power Supplies    2 x Diffusion Panels    2 x Remote Controls    2 x Heavy Duty Light Stands    2 x Yoke Mounts    Bag for the Stands    Bag for the Lights

The big yellow knob on the back of the unit controls the dimming of the unit. It features an indent for fingertip control and is positioned at the edge of the fixture, which is cut away allowing you to adjust the knob from the side of the unit when the back is difficult to access. You can also use the included wireless remote to control the dimming.

While some users may enjoy the small increase in light output that intensifiers bring, other users prefer to use barndoors without intensifiers. The removable intensifiers that come with this light attach securely to the barndoors. You do not have to attach all four intensifiers, which allows you choose how many barndoors to use for intensifying your output and how many barndoors to use to cut spill.

The top and bottom barndoors integrate gel clips for attaching diffusion or gels.

The fixture features an interchangeable Gold Mount battery plate. Removing four screws and disconnecting the snap connector allows you to swap out the Gold Mount battery plate for the included V-Mount plate.

On the back of the fixture is an LCD info screen that displays the battery power remaining and brightness percentage.

Related Questions and Answers

Q: 1. Does it come with soft box

A: Yes, the SB-NBG 6090 Softbox is a part of Godox SL60IID Daylight LED Video Light (2-Light Kit).

Q: 2. Does this kit come with V Mount batteries?

A: The kit does not come with batteries, but does come with battery mounts. I would recommend the Ikan IB-HDL98S as a Sony battery: it is smaller and lighter than other Ikan batteries, and is just barely under the 100Wh limit that would prevent it from traveling easily.

Q: 3. Is this unit suitable for still photography?

A: It's balanced for daylight so you can use it anywhere you need extra light for video or photography. It's bright for it's size, but not bright like a small on camera strobe. It's very suitable for what it was designed to be -- a small on camera video light. It's plenty bright for close video work such as on the spot interviews, close ups and such. For photography, since it's not bright like a strobe, I don't believe that it would be bright enough in many situations if you were going to diffuse or bounce the light, though I can see where it would be useful as a fill light, background light or light for highlighting hair in a portrait situation.

Q: 4. How long does it last at full power out put and from a fully charged battery? I hope someone tested it...

A: The longest time that I have used the light at full power is about 15 minutes. I can't say at what point it would die.

Q: 5. what is the length of effective light beam?

A: I need to cut the power back at 10-15 feet. Lots of range. The battery lasts over 60 min. To day I used it as a bounce light for 55 min. at full power with no loss.

Q: 6. Does this light get got to the touch? I need to mount this with a camera that my hands will by close by.

A: This light generates little to no noticeable heat, and is safe to touch at all times during normal operation.

Q: 7. What's the output of this light compared to a tungsten fresnel?

A: Sean, the SW50 is comparable to an Arri 150 light or a Lowel Pro Light.CRI: 95 TLCI:96 R9-87At 60 Degree Beam Angle:2ft - 87 fc, 4ft - 33 fc, 6ft - 17 fc, 8ft - 10 fc, 10ft - 8 fcAt 30 Degree Beam Angle:2ft - 494 fc, 4ft - 187 fc, 6ft - 96 fc, 8ft - 57 fc, 10ft - 41 fcHope that helps!

Q: 8. can i use an extension cord to connect the lights? and what type of cord should it be? what voltage?

A: Any of the following extension cords will work with the Godox SL60IID Daylight LED Video Light. : https://bhpho.to/3ZjSIML

Q: 9. Does the light swivel at all? Could it be used for bounce lighting?

A: No it has a shoe mount only. Even if you had a ball adapter mount it wouldn't swivel upward because of its length. The beam is narrow it's much better as an accent light than primary.

Q: 10. How long do batteries last at full power & which brand/model of 18650 give you best bang for buck? thx marty

A: With 4 of the Nitecore 18650 Li-Ion Rechargeable Battery (3.7V, 3400mAh) B&H # NINL1834 batteries installed in this light, you can get about 1 hour of run time at full power. https://bhpho.to/2CfjhYc