Perfect for capturing difficult low angle shots, the Benro 100mm Hi-Hat Compact Tripod Accessoryfrom Benro 100mm Hi-Hat Compact Tripod Accessoryis an extremely useful production tool. Featuring an aluminum leg construction and magnesium 100mm bowl, this tripod can hold up to 220 lb, making it great for heavy cinema rigs. The 2-section legs can extend down to just 3" and reach up to 11" in height, and offer independent leg spread with three stops for working on uneven ground. Additionally, it only weighs 3.6 lb and comes with a custom carrying case.

To ensure maximum usability in your setup, it offers three 3/8"-16 accessory threads and comes with a 3/8"-16 low-profile tie-down adapter for reaching the lowest angles. The feet also have pre-drilled holes to securing to wooden octagon boards or apple boxes and can be removed and switched out for the included spiked feet.

100mm Bowl    Load Capacity: 220 lb    Min Height: 3", Max Height: 11"    2-Section Aluminum Legs; Magnesium Bowl    Independent Leg Spread with 3 Stops    Weight: 3.6 lb    Three 3/8"-16 Accessory Threads    3/8"-16 Low-Profile Tie-Down Adapter    Custom Carrying Case Included    Includes SuperUser Group Membership

Related Questions and Answers

Q: 1. How much do these sticks weigh? Trying to decide between this carbon fiber option, and the aluminum.

A: The Benro C674TM carbon fiber tandem-Leg video 100mm tripod weight is 7.65lb. The Benro A674TM 100mm aluminum model has a weight of 9.21lb.

Q: 2. Will the included case have room for the BV10 100mm tripod head?

A: Yes, the Benro C674TM Carbon Fiber Tandem-Leg Video Tripod (100mm Bowl) will fit in the carry bag that comes with the Benro BV10 Twin-Leg Aluminum Tripod Kit. This fit does not include a head being attached.

Q: 3. What type and size of pipe "track" should be used?

A: The Dana Dolly Hi Hat Universal Kit (B&H# DADDHHUK1) may be used with pipe that is 1.5 to 1.9 inches (3.8 to 4.8 cm) in diameter. Schedule 60 steel pipe is enough for most uses, but if you will be using an especially heavy load then schedule 80 could be used.

Q: 4. Does this come as pictured or with the white laminate?

A: It looks like our current inventory is in this standard finish for the Alan Gordon Enterprises Hi-Hat and Low-Hat Mounting Board (Pre-Drilled with Screws).

Q: 5. Is this a "H Series" Benro tripod?

A: Benro lists this tripod as part of their S Series, not H Series.

Q: 6. What is the screw size and thread gauge of the screws that come with this?

A: We connected with Alan Gordon about the screws included with the Alan Gordon Enterprises Hi-Hat and Low-Hat Mounting Board (Pre-Drilled with Screws). Moreover, please note that only Alan Gordon Hi-Hats are compatible with the board. The screws and nuts included are: Cap screw is 3/8 16 by 1 1/4" Hex nut 3/8 16 nut Washers 3/8

Q: 7. Can this be used on any other 75mm tripod legs?

A: The Benro Mammoth Tripod 75mm to 100mm Half-Ball Adapter is only compatible with the Benro Mammoth Tripod.

Q: 8. Does the feet have an option to screw on wheels like the Kessler K-pod?

A: No known screw-on wheels are available. However you can mount the tripod on a dolly. If you have a crane, we suggest this heavy duty dolly. Benro DL10 Heavy-Duty Tripod Dolly B&H # BEDL10. If you have a lighter payload, then this dolly will suffice. Benro DL-08 Tripod Dolly B&H # BEDL08.

Q: 9. will this work with a Sachtler 7+7 100mm head?

A: We believe that the Sachtler 1910 Cine 7+7 HD Fluid Head should be compatible with the Kessler Crane 100mm High Hat for Kessler Sliders, but have not tested it personally. We would also recommend considering to using the Kessler Crane M-10 Knob for Fluid Heads (BH #KECS1063) to tie down the head to the high hat.

Q: 10. Could this also be used on a Benro 100mm Hi-Hat?

A: Benro 100mm Hi-Hat has a different base mount and already comes with the half bowl adapter. Unfortunately Benro Mammoth Tripod 75mm to 100mm Half-Ball Adapter. is not compatible with Benro 100mm Hi-Hat.