A versatile camera support for a versatile platform, the ALZO Wheelchair Camera Mount for Stable Photographyis a flexible metal arm that supports up to 8 pounds of camera and clamps onto your wheelchair arm or other posts, round or square, up to 2" thick. The included ALZO Camera Flipper mounts on the end of the flexible arm, and it provides a platform for mounting your camera on the arm. The Camera Flipper also allows you to rapidly change your camera's orientation from horizontal to vertical without removing your camera from the support.

The included Super Clamp will clamp onto round or square tubes, as well as flat surfaces, which allows you to use this camera support on a variety of platforms. The flex arm features a clamp for a Baby-pin on each end, allowing you to clamp it on the Super Clamp's Baby-pin. The arm takes the weight of your camera, leaving you free to stabilize the shot without having to support the weight of the camera.

Flexible Support Arm    Supports up to 8 lb    Clamps onto Posts up to 2" Thick    Easy Landscape to Portrait Adjustment

The arm takes the weight of your rig to help avoid fatigue, and leaves your hands free to operate optional remote controllers

Suitable for use on manual or motorized wheel chairs

Flexible mounting positions

The included Camera Flipper works in horizontal or vertical orientations and allows you to position the camera on an angle

The Camera Flipper has a locking pin that holds it in the vertical position

Related Questions and Answers

Q: 1. Can you use this tripod for both overhead shots and different angles like a regular tripod?

A: This is a bar that attaches to a tripod. If someone is holding the bar, you can basically use it in any direction.

Q: 2. Can this be used with dslr such as a 7D?

A: This can be used by any camera. I adapted mine by placing a quick release plate on the rig and a quick release plate on the bottom of the rig which mounts to my tripod. Makes connections much easier. Rig is very customizable to your needs.

Q: 3. would this work with the Fuji xt3?

A: Yes this will fit the PC socket of the camera

Q: 4. Would this work with a Yashica MAT LM?

A: No

Q: 5. Full gear kit is just the bracket? Is the shoulder mount with rodsnot included?

A: Included in the box is: Cinema Camera Transformer Rig, 3 x Shoe Mount, Transformer Rig Height Extender (Set of 2), Ball Mount, Transformer Bracket Handle and Limited 5-Year Warranty. The 15mm LWS, follow focus and matte box shown in two of the pictures are not included.

Q: 6. I would like to use this for both my phone and canon camera. Would I have to buy a separate camera clamp? Will this even support my camera?

A: No, the ALZO Horizontal Camera Mount with Rotating Smartphone Mount and Bluetooth Shutter Release BH #AL2010 has a 1/4"-20 Mount so a camera can connect to it directly.

Q: 7. there are different models for tascam vs zoom. why? and are either suitable for zoom h1n, which is not mentioned? thanks.

A: The H1n is quite a bit smaller than the other recorders, so it will not have a snug fit. You can use the Rycote 041119 recorder suspension system, though: https://www.bhphotovideo.com/c/product/758975-REG/Rycote_041119_041119_Portable_Recorder_Suspension.html

Q: 8. Would this work with a vixia g20? If not, what would.

A: Yes it will. This system has clearance for up to 7.5 tall and 8.5 wide. It will have no issues handling the Vixia G20.

Q: 9. Can you easily switch from horizontal to vertical?

A: Yes you can. The camera is mounted on a Ball head so all you need to do is loosen the knob, arrange the camera how you like (horizontally, vertically, or anything in between), and then tighten the knob to lock it in place.

Q: 10. Can I shoot vertically with this ballhead?

A: Yes, that will be possible.