Kramer Bcls-21 Cat 6 U/Utp Lszh Cable 1000Ft

Kramer Bcls-21 Cat 6 U/utp Lszh Cable 1000ft

Product Code: eq181196
Availability: In Stock

$590.40 $732.10

Qty

6 reviews Write a review

Description
Reviews (6)

The Kramer BCLS-21 Cat 6 U/UTP LSZH Cable 1000ftby Kramer BCLS-21 Cat 6 U/UTP LSZH Cable 1000ftis a high-performance Cat 6 U/UTP cable for IT, LAN, and Ethernet installations. Its design exceeds Cat 6 specifications and provides a larger bandwidth than the basic standard cable (sweep frequency up to 600 MHz).

The cable is constructed with four pairs of 23-gauge solid bare-copper conductors. The low-smoke, zero-halogen jacket emits limited smoke and no halogen when exposed to high sources of heat, protecting people and equipment from toxic and corrosive gas.

Other features include an internal rip cord to prevent damage to the individual conductors when stripping off the jacket, a cross filler to reduce crosstalk, sequential markings every meter, and a Reelex II carton to help you easily reel out the cable when deploying it.

Bandwidth Exceeds Cat 6 Specifications 4 Pairs 23 AWG Solid Bare Copper Low-Smoke/Zero-Halogen Jacket Internal Rip Cord Cross Filler Sequential Markings Reelex II Carton

Parameters
Construction	Conductor: 4 pairs of 23 AWG solid bare copper Insulation: Polyolefin (PO) - blue & white / blue stripe, orange & white / orange stripe, green & white / green stripe, brown & white / brown stripe Twist: Left-hand Assembly: Left-hand direction Rip Cord: Polyester multi-yarn Filler: Polyolefin (PO) Jacket: Low-smoke zero halogen (LSZH), gray (Pantone 363C)
Diameters	Jacket: 0.23 ±0.007" (6.0 ±0.2 mm) Jacket Thickness: 0.019 ±0.001" (0.50 ±0.05 mm) Insulation Blue & White / Blue Stripe: 0.038 ± 0.007" (0.97 ± 0.02 mm) Insulation Orange & White / Orange Stripe: 0.036 ± 0.007" (0.93 ± 0.02 mm) Insulation Green & White / Green Stripe: 0.037 ± 0.007" (0.96 ± 0.02 mm) Insulation Brown & White / Brown Stripe: 0.036 ± 0.007" (0.93 ± 0.02 mm)
Electrical	Temperature and Voltage Rating: 60°C @ 300 V Spark Test: 2.5 kVDC AC Leakage Current: ≤ 10 mA /1.5 kVAC, through overall jacket Coupling Attenuation: ≤ 55 dB @ 30 MHz, ≤ 47 dB @ 250 MHz Conductor DC Resistance: ≤ 9.38 Ohms / 100 m Resistance Unbalance: ≤ 5% Dielectric Strength: 1.5 kVAC for 2 sec Insulation Resistance: ≥ 5000 MOhms/m Mutual Capacitance: ≤ 5.6 nF / 100 m Capacitance Unbalance: ≤ 330 pF / 100 m, pair-to-ground Characteristic Impedance: 100 ±15 Ohms @ 1 to 100 MHz
Regulatory Performance	ANSI/TIA-568-C.2 (2009): Balanced twisted-pair telecommunications cabling and components standards ISO/IEC 11801 (Edition 2.2): Information technology, generic cabling for customer premises IEC 61156-5 (Edition 2.0): Multicore and symmetrical pair/quad cables for digital communications (part 5: symmetrical pair/quad cables with transmission characteristics up to 1000 MHz, horizontal floor wiring, sectional specification) EN 50288-3-1:2013: Multi-element metallic cables used in analog and digital communication and control, sectional specification for unscreened cables characterized up to 250 MHz, horizontal and building backbone cables
Regulatory Safety	EN 50173-1:2011: Information technology, generic cabling systems (part 1: general requirements) IEC 60332-1-2: Tests on electric and optical fiber cables under fire conditions, (part 1-2: test for vertical flame propagation for a single insulated wire or cable), procedure for 1 kW pre-mixed flame IEC 61034-1 / 61034-2: Measurement of smoke density of cables burning under defined conditions IEC 60754-2: Test on gases evolved during combustion of materials from cables
Usage & Environmental	Cable Cold Bend: -4°F (-20°C) for 4 hours Insulation Tensile Strength: 2400 PSI min. (1.69 kg/m²) NVP: 69% Temperature Range / Storage & Shipping: -4° to 140°F (-20° to 60°C) Temperature Range / Installation: 32° to 140°F (0° to 60°C) Temperature Range / Operation: -4° to 140°F (-20° to 60°C) Minimum Bending Radius: ≥ 4 x the overall diameter Maximum Pulling Tension: ≤ 110 N
Length	1000' (304.8 m)
Packaging Info
Package Weight	29.7 lb
Box Dimensions (LxWxH)	15.8 x 15.1 x 10.4"

4 pairs of 23 AWG solid bare copper conductors
Low-smoke zero-halogen jacket for safety
Exceeds Cat 6 specifications for wider bandwidth
Sweep frequency up to 600 MHz
Internal rip cord for additional protection
Cross filler for reduced crosstalk
Sequential markings every meter
Reelex II carton for easy pull-out
Applications include structure cabling for horizontal and building backbone cable, IT, LAN and Ethernet installations, IEEE 802.3ab 1000BASE-T, 1000BASE-TX and legacy speeds, CDDI/ATM/Token Ring, and IEEE 802.3af (PoE) / IEEE 802.3at (PoE+)

Related Questions and Answers

Q: 1. Can this bag fit a C300 MK II with lens and monitor?

A: The interior height of the bag is 8.75 inches. The camera will fit without any problems, but the handle and/or monitor will have to be removed from the top. The C300 is taller than virtually every other cinema camera on the market, so it requires a little adjustment in order to fit inside an airline carry-on compatible case.

Q: 2. Anyone had any trouble carrying this on a flight?

A: While the Tenba Roadie Roller 21 dimensions do not exceed the average carry-on size of 22 x 14 x 9", certain airlines have differing requirements for carry-on sizes.

Q: 3. Can the two shoulder straps be removed? Not can a shoulder strap be attached is the previous question. Its a question because when you set the bag down the shoulder straps will be on the ground. If the ground is wet, your shoulder straps will become wet too. So what is the point of having a waterproof bottom If you shoulder straps can't come off and get soaked if you put it down?

A: The straps cannot be removed, and a shoulder strap cannot be attached. However, I should note that in terms of popularity, the backpacks are more popular then the shoulder bags these days, since it is a more comfortable (for most people) way to carry a heavy load.The backpack does not have the special waterproof fabric on the bottom that the shoulder bag does. It is not possible with the backpack harness and belt. Also, the waterproof fabric would tun the harness into a sweat machine when carried on a hot day since it would never ventilate.

Q: 4. anyone use this as a battery bag?

A: This bag could be used as battery bag. Having more dividers would be optimal if looking to separate various batteries, but the spacious 11 x 18 x 8.75" interior could hold a good amount.

Q: 5. Is this too big for international carry on size?

A: It depends on the carrier and the plane being used. The height (21 inches) and width (14 inches) should meet most international requirements. However, the depth is around 9 inches (10 including top handle), and that might be too tall for some regional jets.

Q: 6. Will this fit a canon c100 ii with the top handle and side grip attached? thanks!

A: The C100 Mark II with Top Hand and Side Grip attached has dimensions of 7.4 x 11 x 13.1". This case has interior dimensions of 11 x 18 x 8.75". Depending on the position you place the camera in the bag, it will be possible to handle the C100 Mark II with top handle and side grip still attached.

Q: 7. Has anyone put this in an overhead bin on an aircraft?

A: Yes, Meets most international airline carry-on regulations

Q: 8. Can you attach shoulder straps?

A: No, shoulder straps cannot be attached. But the padded handle is leather wrapped to make the bag comfortable to hand carry, even when loaded.

Q: 9. Is this size carry-on safe for most airlines?

A: Yes.

Q: 10. Will this bag fit an assembled canon c100 mark ii?

A: The interior height is 7 at a minimum, and 8 through the center channel (between the bars of the handle) when the padded divider is removed. I hope that helps. Just measure your camera height in the configuration you'd prefer and if it's under 8 then it should fit.

paul	23/09/2024
[29.7 lb] It was my first time running network cable through my house. This cable is tough and easy to snake through walls and crawlspaces. It's very durable and we didn't have any trouble with snags in the box or anything. The twists in the bundle are easy to create network connections for either A or B modes. I never terminated cat6 cables in my life and I was able to untwist and terminate b mode ends with no issues. I highly recommend this product to anyone looking to create or upgrade a network that needs cat6. 5

Eduardo	25/07/2024
[1000' (304.8 m)] very good cable 5

Jonathan	25/07/2024
[29.7 lb] We used this cable and have found it to work perfectly for all the cables we have made thus far. 5

Sean	04/07/2024
[1000' (304.8 m)] This is quality cable! Solid twisted pairs, notable difference from the typical riser cable purchased at big store names. I would buy again without hesitation.Good cable. 5

Dr H	26/06/2024
[29.7 lb] We ordered this cable for communications in the office. The product is as advertised. Price was very good when comparing. 5