The Kramer BCLS-31 Cat 6A U/UTP LSZH Cable 1000ftby Kramer BCLS-31 Cat 6A U/UTP LSZH Cable 1000ftis a high-performance Cat 6A U/UTP cable for IT, LAN, and Ethernet installations. Its design exceeds Cat 6A specifications and provides a larger bandwidth than the basic standard cable (sweep frequency up to 650 MHz).

The cable is constructed with four pairs of 23-gauge solid bare-copper conductors. The low-smoke, zero-halogen jacket emits limited smoke and no halogen when exposed to high sources of heat, protecting people and equipment from toxic and corrosive gas. The jacket is round & smooth without twisted stripe, and its zigzag design provides excellent performance of six-around-one bundle transmission.

Other features include an internal rip cord to prevent damage to the individual conductors when stripping off the jacket, a cross filler to reduce crosstalk, sequential markings every meter, and a fumigated plywood reel.

Bandwidth Exceeds Cat 6A Specifications    4 Pairs 23 AWG Solid Bare Copper    Low-Smoke/Zero-Halogen Jacket    Internal Rip Cord    Cross Filler    Zigzag Jacket Design    Round & Smooth Jacket, No Twisted Stripe    Sequential Markings    Fumigated Plywood Reel

• 4 pairs of 23 AWG solid bare-copper conductors
• Exceeds Cat 6A specifications for wider bandwidth
• Low-smoke zero-halogen jacket for safety
• Zigzag jacket design for improved performance of six-around-one bundle transmission
• Round and smooth jacket without twisted stripe
• Sweep frequency up to 650 MHz
• Internal rip cord for additional protection 
• Cross filler for reduced crosstalk
• Sequential markings every meter
• Fumigated plywood reel
• Applications include structure cabling for horizontal and building backbone cable, IT, LAN and Ethernet installations, IEEE 802.3an 10GBASE-T and legacy speeds, CDDI/ATM/Token Ring, and IEEE 802.3af (PoE) / IEEE 802.3at (PoE+)    

Related Questions and Answers

Q: 1. What is the width of the plate?

A: The Kirk PZ-31 Arca-Type Compact Quick Release Plate dimensions are, W 1.75 x L 1.63 inches x depth 0.6 inches.

Q: 2. Does this slider come with a case?

A: No. At least mine didn't...

Q: 3. Can this be used manually, sliding by hand while tilting and panning the camera mounted in a fluid head?

A: Yes, you can move the camera manually across the slider, but it is not built for that and we can't recommend it, as the gears might prevent you from getting a smooth shot. For manual use, we'd recommend getting a non-motorized slider such as the Axler 30" Lightweight Carbon Fiber Camera Slider (BH #AXCSCF30LW • MFR #CS-CF-30LW).

Q: 4. Can this slider operate in shoot-move-shoot mode as a slave, e.g. to a Timelapse+ View ramping intervalometer or Syrp Genie Mini II?

A: For Time-Lapse Shooting the GP-80QD motorized video slider supports, moving at preset intervals set by the user. You can set slip speed, slip intervals, stop time, photo number, and auto loop.

Q: 5. Does this fit onto all Nanlite units, such as the Forza 60, 300 etc?

A: Yes it does fit

Q: 6. Must this slider be disassembeled for transport?

A: No. The following unit can travel as is. We only suggest removing the head before travel.

Q: 7. The specs state the horizontal load limit is 11 lbs. What is the vertical load limit?

A: The GVM Wireless Carbon Fiber Motorized Camera Slider (31") cannot handle a vertical load.

Q: 8. Can you mount a tripod head to this slider in order to pan while you slide?

A: Yes, you can via a mounting adapter such as B&H # DIMASD. If the fluid head has 1/4-20 as opposed to 3/8 mount then you can use reducer bushing such as B&H # WIBS100.

Q: 9. Can this slider be setup in a way that it keeps moving during timelapse shooting? I would like to get motion blurring by shooting with long exposure times and camera movement during the exposure of each frame.

A: This GVM slider and most any slider during time lapse will stop for each captured frame. You would use Editing applications to create the Blur in post.

Q: 10. Do you have a soft case to fit the YAMAHA MM8 keyboard?

A: I do have one